RESALE : Mechanical engineering

D20E/6589 - multiple wire drawing machine - wet - DIGEP...
multiple wire drawing machine - wet overhauled 2006Offer Number: D20E/6589 make: DIGEP type: DHG500/2+DGH350/7 inlet wire diameter: 5,5 mm finished diameter: 2,2 mm number of draft: 9 dia. of...

more infos

D48E/6582 - barbed wire machine - WAFIOS STH2
barbed wire machine Offer Number: D48E/6582 make: WAFIOS type: STH2 line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,2 mm output - meter/min: 25-38 For an offer from the owner of this...

more infos

D32I/6579 - spring coiling machine - HACK ASF2B
spring coiling machine for torsion springsOffer Number: D32I/6579 make: HACK type: ASF2B wire diameter: 0,3-2 mm spring diameter: 25 mm leg length: 80x100 mm output - pieces/min: 60-70 For an offer...

more infos

Farrat Anti Vibration Pads & Machine Mounts Air Loc -...
Product description: Farrat Anti Vibration Pads & Machine Mounts Air Loc Manufacturer / Make: Farrat United Kingdom UK Type: Vibration Isolation, Anti Vibration Area of application:...

more infos

OJOP Sweden Catches & Strikers, Battery Connectors - OJOP...
Product description: OJOP Sweden Catches & Strikers, Battery Connectors Manufacturer / Make: OJOP Sweden Type: Fasteners Area of application: Metals additional description: About OJOP...

more infos

Airomats Anti Fatigue, Anti Slip PVC Matting USA -...
Product description: Airomats Anti Fatigue, Anti Slip PVC Matting USA Manufacturer / Make: Airomats Type: Engineering Area of application: Engineering additional description: About...

more infos

Cap Screws, Set Screws, Nuts, Bolts, Washers - Thor -...
Product description: Cap Screws, Set Screws, Nuts, Bolts, Washers Manufacturer / Make: Thor Type: Threaded Fasteners Area of application: Engineering Supplies additional description:...

more infos

Dodge Brass Inserts for Plastics - Emhart Technologies -...
Product description: Dodge Brass Inserts for Plastics Manufacturer / Make: Emhart Technologies Type: Fasteners Area of application: Plastics, Thermosets, Thermoplastics additional...

more infos

Bollhoff Rivkle Blind Rivet Rivnuts & Rivstuds (Nutserts)...
Product description: Bollhoff Rivkle Blind Rivet Rivnuts & Rivstuds (Nutserts) Manufacturer / Make: Bollhoff Germany USA Type: Fasteners Area of application: Automation, Precision...

more infos

M24E/6115 - thread rolling machine - WMW UPWSZ63
thread rolling machine Offer Number: M24E/6115 make: WMW type: UPWSZ63 diamter range: 25-200 mm Forging power: 63 to thread length - plunge method: 320 mm thread length - through method: X max....

more infos

M14I/6109 - flat die thread rolling machine - MENN GW51
flat die thread rolling machine with ITW washer assemblyOffer Number: M14I/6109 make: MENN type: GW51 diameter range: 2,6-5 mm shaft length under head: 60 mm max. thread length: 40 mm output...

more infos

M32E/6108 - hot nut former - HATEBUR AMP30
hot nut former induction headingOffer Number: M32E/6108 make: HATEBUR type: AMP30 thread diameter: M20-M32 max. width acros flats: 50 mm max. outside dia. of round pieces: 64 mm bar dia.: 40 mm...

more infos

M14E/6106 - thread rolling machine - SIMA RAP11
thread rolling machine Offer Number: M14E/6106 make: SIMA type: RAP11 diameter range: 6-12 mm shaft length under head: 8-75 mm max. thread length: 75 mm output pieces/min: 1000 For an offer from...

more infos

M14L/5546 - flat die thread rolling machine - MENN - ZOM...
flat die thread rolling machine rotary drum feedOffer Number: M14L/5546 make: MENN - ZOM type: GW62 diameter range: 3,5-8 mm shaft length under head: 100 mm max. thread length: 52 mm output...

more infos

M08I/6105 - transfer header - SACMA SP441L
transfer header bushing cut-offOffer Number: M08I/6105 make: SACMA type: SP441L diamter range: 20 mm number of dies: 4 number of stationes: 5 output - pieces/min: 160 shaft length under head: 180...

more infos

M06I/6104 - double blow header - HILGELAND HC3-35
double blow header Offer Number: M06I/6104 make: HILGELAND type: HC3-35 diameter range: 4 mm shaft length under head: 35(40) mm max. cut-off length: 52 mm output pieces/min: 800 For an offer from...

more infos

M14I/6102 - flat die thread rolling machine - HILGELAND...
flat die thread rolling machine vibratory feederOffer Number: M14I/6102 make: HILGELAND type: FN 6-8-60 diameter range: 8mm high-tensile: 6 mm max. thread length: 60 mm output - pieces/min: 550...

more infos

M24E/6101 - thread rolling machine - WMW UPW25
thread rolling machine Offer Number: M24E/6101 make: WMW type: UPW25 diamter range: 10-100 mm Forging power: 25 t max. thread length: 180 mm max. pitch: 8 mm roller width: 180 mm roller dia.: 230...

more infos

M02L/5956 - trimming maschine - HILGELAND-LIZ. ME2
trimming maschine Offer Number: M02L/5956 make: HILGELAND-LIZ. type: ME2 diameter range: 2,6 - 8 mm shaft length under head: 6-80 mm output pieces/min: 170 For an offer from the owner of this...

more infos

M02L/5929 - trimming maschine - HILGELAND-LIZ. ME6
trimming maschine Offer Number: M02L/5929 make: HILGELAND-LIZ. type: ME6 diameter range: 20 mm shaft length under head: 180 mm output pieces/min: 100 For an offer from the owner of this machine...

more infos