Products and Services
Areas of application
GIS - Gas insulated Switchgear
Customer-individual cable-connection-insulators for use with standard-cones acc. IEC 50181.
- Mouldings, Gaskets, Sealings
- rubber balls
- Bonded Seals
- Profiles, Tubular rings
- Foam- and Cellular Products,
- Stamping parts, technical plates
- liqid dipping parts
… from rubber, thermoplastic elastomers, cellular rubber, polyurethane, themoplastics, thermosetting materials, liquid silicone rubber, liquide cristalline materials; 1K- or 2K-processes
- Tools, moulds, gauges
- Engineering, project management
Lateral introduction slots make the additonal montage and assembly of cables and pipes possible (also of prefabricated cables). High traction relief with a constant pressure over the entire width of execution. Unneeded executions will be closed simply by blind plugs. Also suitably for the application in chain systems.
An additional montage and assembly of the system makes it flexible to all challenges.
The insulators of our flameproof conductor bushings of the GD-series are made from cast resin. They come with a removable bolt made out of copper, OSNA or brass.
The screw-in threads of the insulators are available in M80x1.5 and M110x1.5. The bolt diameter can be chosen between 16mm and 20mm.
The conductor bushings of the GD-series are suitable for ambient temperatures between –55 °C and +120 °C. The rated voltage is 6600 V or 11000 V and the continuous current of the conductor bushings is from 315 A up to 630 A.
The flameproof conductor bushings of the GD-series are ATEX- and IECEx approved.
PTB 98 ATEX 1067U
DIN EN 60079-0: 2012
DIN EN 60079-1: 2007
DIN EN 60079-7: 2007
IECEx PTB 08.0054U
IEC 60079-0: 2011
IEC 60079-1: 2007-04
IEC 60079-7: 2006-07
In addition to our standard conductor bushings we provide special designs according to your requests (e.g. extended threads, coupling hole, connection design etc.).
Products and Services
Cable entry systems
for standard cables
Even when entering standard cables icotek offers a wide range of products with a lot of advantages in comparison to conventional cable glands.
The compact, slim and innovative design of the icotek systems offer a professional appearance and high ingress protection classes up to IP68 / NEMA 4X.
Due to high packing densities especially suitable for applications where a lot of cables have to be entered through a small space.
1. High packing density
The cable entry plates KEL-DPZ and KEL-DP offer the opportunity to enter a large amount of cables through a small space.
2. Fast and easy assembly
Installation of cables by pushing the cables through the thin, pierceable membrane.
3. No new punch-out tools required
The KEL-DP range matches exactly the drilling templates, as well as cut-outs according to the standard dimensions for multi-pole connectors (for example from Harting, Wieland).
4. Tight sealing
Depending on the product a very high sealing rate up to IP68 / NEMA 4X can be achieved.
Due to the large variety of designs and sizes available, there is a solution for every application.
6. Customised solutions
If you cannot find what you need in our standard product portfolio, custom solutions are available upon request.