Trimming Presses - You find here 29 suppliers from Germany, Austria and Switzerland. Please obtain more information on spare parts, servicing, maintenance, Repair, repair or accessories directly from the registered companies.
Construction and operating process of a trimming press
The trimming press consists of a punch unit or cutting device, the upper part of the tool and bottom part of the tool, upon which the piece to be worked on is placed. The feeding can be done by a removal device or a robot. The securing of the workpiece takes place in the machine by an inserted bracket. The press trims the piece mainly through high pressure casting. The presses work either mechanically or hydraulically. The trimming is a punching process.
With the hydrolic press the trimming pieces are moved through water pressure. This pressure arises through electric motors and high performance pumps. The pressure range arising is up to 300 pressure bars.
The mechanical press moves the punching tool by means of devices such as shafts, friction wheel drives, tappets and other mechanical principles.
Areas of application of trimming presses
They are used primarily to remove protruding bulges and edges caused during the production of the pieces. In a fully automated casting process the cast piece is transferred to the trimming press by a removal device. This then trims by means of the punching tool protruding cast bulges and cast edges. Application field of the trimming press
They are used in the finishing process of cast pieces. Before the cast piece can be worked with further the burrs have to be removed.
The trimming press in application.
The cast piece is placed on the bottom part of the tool. For this a robot can be used or it can be carried out manually by a person. The charge and discharge is possible from two sides and controlled through a linear guidance system. The cast piece is fixed to the holding mechanism and the upper part of the tool is applied. The cutting tool obatins an operating speed so that the cast piece can be pressed upon without deforming it and the cutting or punch only frees the burrs from the piece.
Further information and fittings for presses can be found under press fittings.
Trimming Presses - Synonyms, Singular/Plural