تولیدکنندگان، عرضه‌کنندگان، توزیع‌کنندگان

CETA Testsysteme GmbH
Solution Partner for industrial Leak Testing and Flow Measurement
CETA Testsysteme GmbH develops and manufactures leak tester and flow test devices (Made in Germany) and has more than 30 years of experience in solving industrial inspection tasks. The test media used are compressed air and hydrogen. The customers use the test equipment for quality assurance and production assurance in the production line. The wide range of services includes consulting, feasibility analysis, putting into operation, training, maintenance and calibration. CETA is certified according to DIN ISO 9001 and won the Quality Award North-Rhine-Westphalia in 2002 in the industry division. Since 2012, CETA has consistently been awarded a very good credit rating. Since 2004, the calibration laboratory (D-K-19566) has been accredited according to DIN EN ISO / IEC 17025 for the measurand pressure. The internationally recognized DAkkS calibration certificate complies with the requirements of the IATF 16949 standard valid in the automotive industry. With cooperation partners in currently 14 countries as well as several thousands of test equipment used worldwide, CETA presents itself as a competent solution partner for industrial leak and flow testing.
For further information visit www.cetatest.com

LineMetrics ist eine B2B Internet of Things Plattform. Sie wird als Gesamtsystem zur Erfassung und Analyse von Sensor- und Messdaten genutzt. Anwender verwenden LineMetrics zur Erfassung und Auswertung beliebiger Kennzahlen. Das Spektrum reicht von der Überprüfung der Wirksamkeit von Energieeffizienz-Maßnahmen, über die Performance-Auswertung in der Produktionsoptimierung, bis zu automatischen Benachrichtigungen wenn bestimmte Situationen eintreten (zB Temperatur überschritten, Stückzahl erreicht, Maschine an/aus, uvm.).
Die Plattform macht den gesamten Vorgang so einfach, dass der Anwender besonders rasch zu Ergebnissen kommt. Von der Inbetriebnahme, über die Konfiguration bis zur Nutzung - alle Teilschritte sind besonders nutzerfreundlich konzipiert. Das Ganze bei einem Kostenfaktor der die automatisierte Datenerfassung erstmals auch KMU zugänglich macht.
Highlight ist die speziell entwickelte LineMetrics Hardware: eine GSM Datenlogger-Box und ein ganzes Portfolio on Plug & Play Drahtlos-Sensoren die zur Anbindung von physischen Anlagen und Sensoren an die LineMetrics Cloud verwendet werden. Das System funktioniert ohne IT-Aufwand in ganz Europa und ist bereits in 6 Ländern im aktiven Einsatz.

High quality leak test device - ideal for a professional leak test
Are you looking for a modern leak detector ? APT is the right contact for various types of leak testing as a qualified leak test device manufacturer in Germany. The wide range of services begins with the development and manufacture of modern leak testing devices for vacuum or overpressure processes and extends to expert advice with regard to differential pressure measurement or flow measurement.
Leak test equipment and other systems for leak testing
We offer you systems for leak testing with air and many other technical solutions, which you can rely on at any time one hundred percent. We also implement complete facilities for leak tests with air and other applications, including commissioning, instruction or training courses.
Leak testing devices PMD02: reliable, intelligent, flexible
The leak detector of the PMD02 series has proved itself on the market as a system within industrial testing Technology. Worldwide more than 1000 leak test devices are used by well-known companies. They convince with high flexibility and robustness as well as easy Operation. The PMD02 is used to test the tightness of hollow bodies such as pumps, motors or gearboxes. Up to 100 different test programs are available to adapt to your specific test Tasks. Depending on the version, up to three test channels can work simultaneously. This leak detector can be used for both, differential pressure and mass flow processes or a combination of both methods. In addition, it is possible to store and evaluate the last 100 measured values (min / max values, average, standard processing). Thanks to a wide range of equipment and the use of various measuring methods, all test tasks can be carried out precisely and quickly by vacuum areas up to 10 bar overpressure.
Flow meters PMF01: Multitalent for various tasks
Our PMF01 series flow meter has also established itself as a robust test system on the market. The models are used for the measurement and classification of air flows (leaks in the automatic production process) and convince with multi-channel capability and compact design. The special design and the availability of 32 different test programs also enable the realization of individual Solutions. The PMF01 models can measure larger mass flows, simultaneously at several test sites. In this case, the mass flow method is used as a measuring principle, in which the measurement can be carried out at low or high pressure. For the purposes of testing, the measurement curves of the individual channels can be graphically displayed on the integrated LC Display. These flow testers are equipped with two RS232 interfaces as standard. Optionally a computer connection via 3964R or ASCII is possible.
APT - leak test equipment manufacturer in Germany and specialist for other testing techniquesFor more than 20 years, APT Angewandte Prozessortechnik GmbH has been your competent partner when it comes to reliable test equipment for leak testing, differential pressure measurement and related fields. Together we find the fastest and best solution.
With us you get not only various test devices for different application fields, but also useful accessories, for example test air filters or software kits. You have questions about a specific leak test device or other APT products? Our employees are at your disposal with extensive expertise as a competent contact person.