Programme de livraison
Fabricant Commerçant Prestataire de services Sous-traitantAccessoires de façade
Systèmes de fixation
Systèmes d'ancrage
Accessoires pour fixations
Technique de chevilles
Vis
Ecrous / Rondelles
Profils
Produits
Filtrer par mot clé
redoublement
prix: sur demande Le doublement permet le transfert des forces transversales entre deux éléments préfabriqués avec une...Ancre push-pull DZA
prix: sur demande Le MOSO® La fixation préfabriquée FB-DZA est utilisée pour la protection horizontale par aspiration ...Tirant suspendu FB-HE
prix: sur demande Selon la situation structurelle, plusieurs variantes sont disponibles pour la partie supérieure. Le ...Raccordement horizontal HV-T
prix: sur demande Le MOSO® Le raccord horizontal HV-T est l'ancrage trapézoïdal, ce qui rend superflus les supports au...Support simple EK-D
prix: sur demande Le MOSO® Ancrage de support EK-D avec vis de pression réglable pour une installation facile. Le desi...Ancre anti-vent FB-WA
prix: sur demande L'ancrage anti-vent FB-WA est utilisé pour la protection horizontale contre la pression et l'aspirat...Images
MOSO® Fascia facing - Horizontal connection HV-A
The MOSO® horizontal connection HV-A is the fascia restraint anchor around cracks, that can occur due to different movements of flat roofs and facing. Since the anchor is attached below the flat roof support, the movements of the flat roof have no affect on the facing.MOSO® Wall connections with anchor - MA-A
Wall connections can be made easily using MOSO® wall anchors. The connected is made on tracks so that stepless adjustment is possible. This way settlement cracks in the brickwork are avoided to the greatest possible extent. Thanks to various types of tracks, many applications are possible including horizontal connection of facing masonry amongst others.MOSO® Clamping anchor FB-E
The clamping anchor is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.MOSO® Wind restraint FB-DZA
The MOSO® precast part fixing FB-DZA is used for the horizontal suction restraint of façade panels. This is used in combination with the pressing screw FB-DS.MOSO® Panel anchors FB-HE Type 2
The fitting FB HE was developed for narrow precast concrete parts. For low load levels and large concrete cores, MOSO® CE anchor rails are an affordable alternative to the fitting FB-HE.Type 2 is designed for loads of 38.0 kN up to and including 70.0 kN.MOSO® Panel anchors FB-HE Type 1
The fitting FB HE was developed for narrow precast concrete parts. For low load levels and large concrete cores, MOSO® CE anchor rails are an affordable alternative to the fitting FB-HE. Type 1 covers the load levels 6.0 kN up to and including 22.0 kN.MOSO® Panel anchors FB-HO1
The upper mounting is fixed to the in-situ concrete with an officially approved dowel or a MOSO® CE anchor rail.MOSO® Panel anchors FB-HO1A
The upper mounting is fixed to the top of slab with an officially approved dowel or a MOSO® CE anchor rail.MOSO® Panel anchors FB-HO2
The double bolt type of the upper part is fastened to the in-situ concrete with two officially approved dowels or a MOSO® CE anchor rail.MOSO® Panel anchors FB-HO2A
The double bolt of the upper part is fastened to the top of slab with two officially approved dowels or a MOSO® CE anchor rail.MOSO® Anchor rails MBA-CE
The solution for concrete fixings Officially approved in Europe, anchor rail MBA-CE is used to mount installation parts in in-situ concrete or as a cast-in part in the precast part. The MBA-CE anchor rail offers a horizontal or a vertical adjustment option depending on the mounting situation. MOSO® hammerhead/hook-head bolts MHK are used as fasteners.MOSO® Gallow anchor
The MOSO® precast part fixing FB-G is an anchor for vertical load interception. This can be made in differing variants depending on the situation.MOSO® Dowel connection FB-VD
A dowel connection enables the transmission of lateral forces between two prefabricated parts with a minimum concrete quality of C30/37. A fitting sleeve on the underside of the upper plate and a mortar sleeve on the top of the lower plate are encased in concreteMOSO® Stud anchor FB_SBA
The stud anchor FB SBA allows the attachment of angle plates in the field of reinforced concrete balustrades. The anchor consists of a threaded rod with partial thread and bearing plate with an internal thread. With the additional pressing screws arranged at the lower end of the finished part, the stud anchor provides a complete fixing system.MOSO® Universal butt strap FB-UZL
The toothed universal butt strap is used for individual bracing of loads. The size and bending shape can be adapted to almost any installation situation. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot.MOSO® Transversal stay FB-WA
The transversal stay FB-WA is used for horizontal pressure and suction restraint of façade panels. The connection to the shell is carried out during installation of the panel on the concreted installation component, the circular fixing plate and the two allen screws.MOSO® Serrated Wind Restraint With Hammerhead FB-ZK
The serrated wind restraint with hammerhead is the easy to install solution to take small tensile loads from the precast part. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.MOSO® Serrated wind restraint with hammerhead bolt FB-ZH
The serrated wind restraint with welded hammerhead bolt can be exposed to pressure and pull due to the force-locking connection on the built MOSO® CE anchor rail. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concreteMOSO® Toothed, serrated wind restraint with round hole FB-ZL
The serrated wind restraint with round hole is the standard solution to take the tensile and compressive loads on the top edge of the precast part. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.MOSO® Serrated wind restraint U-profile FB-ZU
The FB-ZU is especially designed for heavy loads and for large shell distances. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot.MOSO® Serrated wind restraint with bracket FB-ZW
The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint can be attached on the face to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete. The serrated wind restrainterrated wind restraint with welded hammerhead/hookhead bolt can be exposed to pressure and pull due to the force-locking connection on the built MOSO® CE anchor rail.MOSO® Serrated wind restraint with bracket without bracing FB-ZWO
The serrated wind restraint with bracket without bracing is a constructive tilt protection for small loads The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.MOSO® Universal anchor - (Individual) support bracket EK-U
The MOSO® support bracket EK-U is the universal anchor for reinforcement of masonry facings. Various versions make the use for almost any purpose on construction sites possible.MOSO® Adjustable pressure screw - (Individual) support bracket EK-D
The MOSO® support bracket EK-D with adjustable pressing screw for simple mounting. The slim design makes a reduction in heat transition possible. With the pressing screw concrete unevenness can be easily compensated.MOSO® (Individual) support bracket EK-W
The flexible solution for small loads: The MOSO® single-bracket anchor EK-W with angle bearing is the ideal Addition to the MOSO® single-bracket anchor EK-U for expansion joints or edge areas. The free support allows secure placement of a full brick.MOSO® (Individual) support bracket EK-L
The MOSO® support bracket EK-L with elongated support is an interesting alternative to standard solutions, since mounting is more comfortable thanks to the flat support angle.MOSO® (Individual) support bracket EK-M
The MOSO® support bracket EK-M is a wall bracket for the secure bracing of existing buildings. Difficult cases are easily solved thanks to the individual design.MOSO® Adjustable pressure screw - (Individual) support bracket EK-D
The MOSO® support bracket EK-G is the economical solution for brick-on-edge course lintels with low overlying masonry. Lintels around corners are also very easy to produce with the EK-GE version.MOSO® Special anchor - (Individual) support bracket EK-S
MOSO® support bracket EK-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstancesMOSO®Adjustable pressing screw - FB-D
The MOSO® precast part fixing FB-D with adjustable pressing screw for the fixing of precast concrete parts. The slim design makes a reduction in heat transition possible.MOSO® precast parts fixing FB-S
Customised MOSO® precast parts fixing FB-S is calculated individually by our engineering office, to ensure optimal solutions, even in challenging conditions.MOSO® Universal anchor for prefabricated lintels - FB-U
The MOSO® precast part fixing FB-U is the universal anchor for the fixing of precast concrete parts. This anchor enables 3-dimensional adjustment for optimum mounting, depending on fixing.MOSO® Scaffold fixing anchors for masonry façades - GA-Q / GA-Z
In Germany, scaffolding must be anchored in accordance with 4420-3:2006-01 or DIN 4426:2017-01. The load capacity of the MOSO® scaffold anchors GA-Q and GA-Z are calculated according to the specifications of DIN 4426:2017-01, because the loads to be anchored are adverse. Type GA-Q for tensile and lateral forces, anchoring also in cracked concrete. Type GA-Z only for tensile forces, anchoring only in non-cracked concrete.MOSO® Special solutions - Scaffold fixing anchor GA-S
MOSO® scaffold anchor GA-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.MOSO® Horizontal connection HV-D
The MOSO® horizontal connection HV-D is the wire tie for the subsequent connection of cavity walls according to DIN EN 1996-2/NA.The anchors can be placed in various bases thanks to different versions.MOSO® Horizontal connection with joint - HV-T
The MOSO® horizontal connection HV-T is a trapezoidal joint anchor, which makes the normally required bracing superfluous. Thanks to the the articulated connection, different movements of the outer and inner shell are compensated.MOSO® Horizontal connection HV-L
The MOSO® horizontal connection HV-L is the air layer eyelet anchor for the subsequent connection of cavity walls according to DIN EN 1996-2/NA.The demolition of the old facing shell during restoration is not necessary since the anchoring can be done through the old shell. Likewise, these anchors can be placed in difficult anchoring bases when the sustainability is proved by tensile tests.MOSO® Special versions - Horizontal connection HV-S
The MOSO® horizontal connection HV-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.MOSO® Windpost fixings
Windposts are profile constructions as a base for holding the facing shell, when fixing to the supporting foundation is only possible laterally on the ground floor level.MOSO® Perforated tape mansonry reinforcement
The MOSO® perforated strip was developed to realise self-supporting lintels over door and window openings.MOSO® Crash bar for invisible support - DB•HB•MBA-ES
In order to construct a invisible facing support, additional brackets are required. In the case of a brick lintel, the brackets serve to secure the positioning of bricks, while the installation components in a prefabricated lintel require a static verification or an approvalMOSO® Angle bearing WA-D/WA-M
The MOSO® angled bearing WA-M allows direct mounting to the anchorage base. With the MOSO® angle bearing WA-D large wall clearances can be bridged with the help of welded diagonal struts. Both types are used when the bracing remains visible and a closed view is desired.MOSO® Special versions - Angle bearing WA-S
MOSO® angled bracket WA-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.MOSO® Angle bearing WA-Ü/WA-Z
The MOSO® angle bearing WA-Ü bridges a lintel opening. Additional fixing is not necessary since the bracket only needs to be layed. The MOSO® angle bearing WA-Z is used as an intermediate angle for bracing with a single support bracket and enables variable support bracket spacing thanks to different lengths.MOSO® (Angle) support bracket WK-O
The MOSO® support bracket WK-O is mounting on top of the concrete surface. Thanks to this, anchoring with dowel mounting can be produced even at low concrete heights.MOSO® (Wall) support bracket WK-Z
For bracing on corners and pillars.he MOSO® support bracket WK-Z with beam tie makes, along with the WK-D, an interesting alternative for corner formations.MOSO® Adjustable (Angle) support bracket WK-D
The MOSO® support bracket WK-D with adjustable pressing screw is the perfect solution for bracing with a continuous angle track. With the adjustment screw concrete unevenness can be easily compensated.MOSO® (Angle) support bracket WK-M
The MOSO® support bracket WK-M is set into the masonry. This bracket is the preferred choice when anchorage base does not allow dowel assembly.MOSO® (Angle) support bracket WK-K
The MOSO® support bracket WK-K lies with its claws on the concrete. Thanks to this, the fixing is relieved, so that even at low concrete heights, frontally fixed high loads can be anchored securely.MOSO® Special anchor - (Angle) support bracket WK-S
MOSO® support bracket WK-S special version are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.Communiqués de presse
Wilhelm Modersohn GmbH & Co. KG 01.06.2021