6 企業：対象検査依頼 ✓ 2か国のB2Bメーカー、ディーラー、サービスプロバイダー ✓ 迅速な情報と価格の特別サービス付き ✓
- 検査依頼 | 検査機器管理 | 検査プラン
- 検査依頼 | 疲労検査
- 検査依頼 | 品質検査 | 受入試験
企業の紹介
さらに読む... HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 検査依頼
- 検査依頼 | 超音波検査 | 疲労検査
検査依頼 - 製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先
時間に限りがあり詳細な製品情報と製品価格が直ちに必要な場合は、IndustryStockの「結果」ページから特別サービス用フォームをご使用ください。
当社のスタッフが検査依頼の最適なメーカー、ディーラー、サービスプロバイダーを見つけ、貴社のメールでのお問い合わせを直ちにこれらの企業に転送します。
検査依頼をお探しですか？
ビジネスで 検査依頼をお探しですか？IndustryStockの製品とサービスの検索エンジンは、 検査依頼 関連のヒットを表示するだけではありません。 検査依頼 と並んで、さらにその他の製品やサービスも探すことができます。 検査依頼 をテーマに登録されているメーカーやディーラーの連絡先データ全ては、全ユーザーが自由に見られます。
このページの情報をどのように評価しますか？
6 評価 98%