16 진동 분류기 관련 회사 ✓ 4의 B2B 제조업체, 판매업체& 공급업체 ✓ 신속하게 내용 및 가격 정보를 검색해주는 특별 서비스 ✓
- HAMMEL SMA - 큰 재료 분리를위한 바 스크린
- HAMMEL MMS 150 DK - 큰 재료 분리를위한 바 스크린
- HAMMEL MMA 1400 E - 자성체와 비자 성체로 구분되는 드럼
- HAMMEL MWA 1000 E - 재료 분리를위한 강력한 와전류
- 진동 분류기 | 분류 운반시설
- 진동 분류기 | 소팅 기술 | 동전계수기
- 진동 분류기 | 소팅 기술 | 정렬
- 진동 분류기
- 진동 분류기
- 진동 분류기 | 소팅 기술 | 동전계수기
당사 소개
내용보기 Over 50 years' experience and success in valve constructionLOHSE Knife Gate Valves for the Paper and Chemical Industry
Long before the actual start of our valve development and
production programme in 1962, we were already partners
of the paper industry. As manufacturers of pulp vats,
containers and machine parts our specialists were always
present when it was a matter of solving problems at our
customers. It was therefore a logical step that we also
addressed the problems of valve technology handling pulp
and fibre.
The complete development of our knife gate valves rests always
on close coordination with the experts from paper and
paper machine manufacturers. This evolution began with
valves made of cast iron and continued with valves lined
with stainless through to today with valves made of
corrosion and acid resistant stainless steel. The reject
valves that were developed parallel to this and were
conceived for the problem positions in waste paper processing, have
since become the standard in recycling paper mills.
We are now the only renowned manufacturer of knife gate valves
with a service-friendly two-part housing. All others have
long since abandoned this design because of
manufacturing costs and now only have valve bodies with a
one part housing. But the simplest way of replacing
wearing parts is if the housing is in two parts. In
addition, the one-part housing has the following further disadvantage:
the space for inserting the valve plate in the housing
has to be relatively large and this increases the danger
of blocking and draining paper fibres. With our valve,
this problem is prevented by the narrow tolerances
between the valve plate and the smooth-running plastic
internal shell. The valve guides are emptied via a specially shaped
sturdy valve plate. A sophisticated system for attaching
accessories and the drives - which are found here as the
LOHSE modular system - is another advantage of our
concept.
Long before the actual start of our valve development and
production programme in 1962, we were already partners
of the paper industry. As manufacturers of pulp vats,
containers and machine parts our specialists were always
present when it was a matter of solving problems at our
customers. It was therefore a logical step that we also
addressed the problems of valve technology handling pulp
and fibre.
The complete development of our knife gate valves rests always
on close coordination with the experts from paper and
paper machine manufacturers. This evolution began with
valves made of cast iron and continued with valves lined
with stainless through to today with valves made of
corrosion and acid resistant stainless steel. The reject
valves that were developed parallel to this and were
conceived for the problem positions in waste paper processing, have
since become the standard in recycling paper mills.
We are now the only renowned manufacturer of knife gate valves
with a service-friendly two-part housing. All others have
long since abandoned this design because of
manufacturing costs and now only have valve bodies with a
one part housing. But the simplest way of replacing
wearing parts is if the housing is in two parts. In
addition, the one-part housing has the following further disadvantage:
the space for inserting the valve plate in the housing
has to be relatively large and this increases the danger
of blocking and draining paper fibres. With our valve,
this problem is prevented by the narrow tolerances
between the valve plate and the smooth-running plastic
internal shell. The valve guides are emptied via a specially shaped
sturdy valve plate. A sophisticated system for attaching
accessories and the drives - which are found here as the
LOHSE modular system - is another advantage of our
concept.
- 진동 분류기 | 소팅 기술 | 기계 정렬
28320 Pinto, 스페인 SOTECMA - TECNICAS PARA MANIPULACION DE SOLIDOS, SL 제조업체 ✓ 딜러 ✓ 공급업체 ✓ 서비스업체 ✓
회사 프로필 문의하기
- 진동 분류기
- 진동 분류기 | 소팅 기술 | 기계 정렬
- 진동 분류기 | 소팅 기술 | 기계 정렬
당사 소개
35년 남짓한 동안 제노는 줄곧 활약해 왔다 전 세계적으로 재활용기술의 기계 및 시스템의 개발자 및 제조업체로서 목재, 플라스틱 및 기타 재료의 분쇄, 분류 및 가공에 사용됩니다. 귀중품, 생활쓰레기, 상업쓰레기.
- 진동 분류기 | 소팅 기술 | 동전계수기
- 진동 분류기
- 진동 분류기 | 소팅 기술 | 공정 자동화
진동 분류기 - 제조업체, 딜러, 공급업체
제한된 시간 내에 더 많은 제품 및 가격 관련 정보를 신속하게 확인하려면 검색 결과 페이지에서 특별 서비스 양식을 이용하십시오.
IndustryStock이 진동 분류기 관련 제조업체, 판매업체 또는 서비스업체 등을 찾아서 귀하의 문의 사항을 전달합니다.
당신은 사업상 진동 분류기 을(를) 찾고 계십니까?
진동 분류기로의 비즈니스 여행을 생각하고 계십니까? IndustryStock의 제품과 서비스 검색은 진동 분류기에 대한 관련 검색결과를 제공합니다. 진동 분류기 이외에도 기타 다른 제품과 서비스를 검색하실 수 있습니다. 진동 분류기에 대한 등록된 제조업체와 배급업체의 모든 담당자 정보는 무료로 제공됩니다.
이 페이지에 있는 정보를 어떻게 평가하십니까?
17 평가 90%