Desenvolvimento, planejamento e produção de elementos de fixação em aço inoxidável

Desenvolvimento de produtos, engenharia, produtos comerciais e produção de sistemas de ancoragem e peças especiais, tudo a partir de uma única fonte
Perfeito no processamento de aço inoxidável, bem como em produções personalizadas de lotes pequenos a médios
Organização extremamente flexível que permite prazos de entrega muito curtos para produções personalizadas e de elementos de sistema para a indústria da construção.
Serviço de entrega de alta qualidade com muito boa consultoria de produto e qualidade
Extenso inventário de peças padrão, cavilhas, chapas, tiras e produtos longos de aço inoxidável.
Experiência acima da média em materiais de aço inoxidável. Acesso particularmente rápido a materiais alternativos feitos de aço inoxidável e aprovações de produtos em cada caso individual
Competência confiável no cálculo de fixações de fachadas, mesmo com elementos finitos
Tempos de acesso rápido aos resultados dos testes de materiais e produtos
A partir de testes de fluorescência de raios-X realizados internamente, ou testes de desempenho de corrosão no BAM (Instituto Federal de Investigação de Materiais, Berlim) ou testes mecânicos em vários laboratórios parceiros
Máquinas flexíveis que processam aço inoxidável no processamento de chapas de 0,5 a 110 mm de espessura de material
Extenso equipamento de usinagem de superfície, como decapagem, jateamento abrasivo, lixamento de superfície, lixamento de corpos, rebarbação, etc.

Profissionais altamente especializados e bem treinados desde o planejamento do projeto até a distribuição.

Exemplo: os engenheiros têm experiência prática fundamental em construção, os varejistas são principalmente técnicos e engenheiros treinados com treinamento adicional em negócios, produção com trabalhadores treinados e qualificados, encaminhamento de comerciantes treinados em distribuição com experiência em embarques no exterior.

O aço inoxidável é um setor de materiais de alta qualidade. O seu processamento requer equipamento especial e trabalhadores qualificados bem treinados. É por isso que estamos comprometidos com a nossa localização na Alemanha e produzimos exclusivamente "Made in Germany" para apresentar a nossa qualidade internacionalmente.

Registro comercial	Bad Oeynhausen, HRA 4336 und HRB 6909
Forma jurídica	GmbH & Co. KG
Número de colaboradores	50-99
Nome comercial	Wilhelm Modersohn GmbH & Co. KG
Ano de fundação	1970
Correspondência	Alemão, Inglês, Russo
Nosso(s) setor(es)	Construção / Materiais de Construção, Engenharia civil
Setores dos clientes	Construção / Materiais de Construção

Entregamos em todo o mundo

Como você classifica esta linha de produtos/serviços?

Wilhelm Modersohn GmbH & Co. KG Industriestr. 23, 32139 Spenge, Alemanha

Enviar consulta

acessórios para fachadas
Sistemas de fixação
Sistemas de ancoragem
Acessórios de montagem
Técnicas de cavilha
Parafusos
Nozes / Lavadoras
- Porcas de aço inoxidável
Perfis

Produtos

Filtrar por palavra-chave

duplicação

preço: sob consulta A duplicação permite a transferência de forças transversais entre dois elementos pré-fabricados com ...

Empurrar-puxar âncora DZA

preço: sob consulta O MOSO® O fixador pré-fabricado FB-DZA é utilizado para a proteção horizontal de aspiração das placa...

Biela suspensa FB-HE

preço: sob consulta Dependendo da situação estrutural, várias variantes estão disponíveis para a parte superior. O compo...

Ligação horizontal HV-T

preço: sob consulta O MOSO® A ligação horizontal HV-T é a âncora de união trapezoidal, o que torna supérfluos os suporte...

Suporte único EK-D

preço: sob consulta O MOSO® âncora de suporte EK-D com parafuso de pressão ajustável para fácil instalação. O design fin...

âncora do vento FB-WA

preço: sob consulta A âncora de vento FB-WA é utilizada para a proteção horizontal de pressão e sucção das placas de fac...

Suporte único EK-L

preço: sob consulta O MOSO® Com seu suporte mais longo, o suporte EK-L é uma alternativa interessante para a solução pad...

Suporte angular WK-M

preço: sob consulta A âncora do suporte MOSO® WK-M é colocada na alvenaria. Esta âncora é preferível se a base de ancora...

Mostrar mais resultados

Modersohn_Verwaltung_2019_klein_20x13cm.jpg

MOSO® (Angle) support bracket WK-M

The MOSO® support bracket WK-M is set into the masonry. This bracket is the preferred choice when anchorage base does not allow dowel assembly.

MOSO® Panel anchors FB-HE Type 2

The fitting FB HE was developed for narrow precast concrete parts. For low load levels and large concrete cores, MOSO® CE anchor rails are an affordable alternative to the fitting FB-HE.Type 2 is designed for loads of 38.0 kN up to and including 70.0 kN.

MOSO® Panel anchors FB-HE Type 1

The fitting FB HE was developed for narrow precast concrete parts. For low load levels and large concrete cores, MOSO® CE anchor rails are an affordable alternative to the fitting FB-HE. Type 1 covers the load levels 6.0 kN up to and including 22.0 kN.

MOSO® Anchor rails MBA-CE

The solution for concrete fixings Officially approved in Europe, anchor rail MBA-CE is used to mount installation parts in in-situ concrete or as a cast-in part in the precast part. The MBA-CE anchor rail offers a horizontal or a vertical adjustment option depending on the mounting situation. MOSO® hammerhead/hook-head bolts MHK are used as fasteners.

MOSO® Wind restraint FB-DZA

The MOSO® precast part fixing FB-DZA is used for the horizontal suction restraint of façade panels. This is used in combination with the pressing screw FB-DS.

MOSO® Clamping anchor FB-E

The clamping anchor is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.

MOSO® Gallow anchor FB-G

The MOSO® precast part fixing FB-G is an anchor for vertical load interception. This can be made in differing variants depending on the situation.

MOSO® Dowel connection FB-VD

A dowel connection enables the transmission of lateral forces between two prefabricated parts with a minimum concrete quality of C30/37. A fitting sleeve on the underside of the upper plate and a mortar sleeve on the top of the lower plate are encased in concrete

MOSO® Panel anchors FB-HO1

The upper mounting is fixed to the in-situ concrete with an officially approved dowel or a MOSO® CE anchor rail.

MOSO® Panel anchors FB-HO1A

The upper mounting is fixed to the top of slab with an officially approved dowel or a MOSO® CE anchor rail.

MOSO® Panel anchors FB-HO2

The double bolt type of the upper part is fastened to the in-situ concrete with two officially approved dowels or a MOSO® CE anchor rail.

MOSO® Panel anchors FB-HO2A

The double bolt of the upper part is fastened to the top of slab with two officially approved dowels or a MOSO® CE anchor rail.

MOSO® Stud anchor FB-SBA

The stud anchor FB SBA allows the attachment of angle plates in the field of reinforced concrete balustrades. The anchor consists of a threaded rod with partial thread and bearing plate with an internal thread. With the additional pressing screws arranged at the lower end of the finished part, the stud anchor provides a complete fixing system.

MOSO® Universal butt strap FB-UZL

The toothed universal butt strap is used for individual bracing of loads. The size and bending shape can be adapted to almost any installation situation. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot.

MOSO® Transversal stay FB-WA

The transversal stay FB-WA is used for horizontal pressure and suction restraint of façade panels. The connection to the shell is carried out during installation of the panel on the concreted installation component, the circular fixing plate and the two allen screws.

MOSO® Serrated Wind Restraint With Hammerhead FB-ZK

The serrated wind restraint with hammerhead is the easy to install solution to take small tensile loads from the precast part. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.

MOSO® Serrated wind restraint with hammerhead bolt FB-ZH

The serrated wind restraint with welded hammerhead bolt can be exposed to pressure and pull due to the force-locking connection on the built MOSO® CE anchor rail. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete

MOSO® Toothed, serrated wind restraint with round hole FB-ZL

The serrated wind restraint with round hole is the standard solution to take the tensile and compressive loads on the top edge of the precast part. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.

MOSO® Serrated wind restraint U-profile FB-ZU

The FB-ZU is especially designed for heavy loads and for large shell distances. The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot.

MOSO® Serrated wind restraint with bracket FB-ZW

The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint can be attached on the face to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete. The serrated wind restrainterrated wind restraint with welded hammerhead/hookhead bolt can be exposed to pressure and pull due to the force-locking connection on the built MOSO® CE anchor rail.

MOSO® Serrated wind restraint with bracket without bracing FB-ZWO

The serrated wind restraint with bracket without bracing is a constructive tilt protection for small loads The toothing on the flap guarantees optimum power transmission and allows accurate adjustability via the slot. The serrated wind restraint is attached to a building authority approved plug or a MOSO® CE anchor rail on in-situ concrete.

MOSO® Universal anchor - (Individual) support bracket EK-U

The MOSO® support bracket EK-U is the universal anchor for reinforcement of masonry facings. Various versions make the use for almost any purpose on construction sites possible.

MOSO® Adjustable pressure screw - (Individual) support bracket EK-D

The MOSO® support bracket EK-D with adjustable pressing screw for simple mounting. The slim design makes a reduction in heat transition possible. With the pressing screw concrete unevenness can be easily compensated.

MOSO® (Individual) support bracket EK-W

The flexible solution for small loads: The MOSO® single-bracket anchor EK-W with angle bearing is the ideal Addition to the MOSO® single-bracket anchor EK-U for expansion joints or edge areas. The free support allows secure placement of a full brick.

MOSO® (Individual) support bracket EK-L

The MOSO® support bracket EK-L with elongated support is an interesting alternative to standard solutions, since mounting is more comfortable thanks to the flat support angle.

MOSO® (Individual) support bracket EK-M

The MOSO® support bracket EK-M is a wall bracket for the secure bracing of existing buildings. Difficult cases are easily solved thanks to the individual design.

MOSO® Adjustable pressure screw - (Individual) support bracket EK-D

The MOSO® support bracket EK-G is the economical solution for brick-on-edge course lintels with low overlying masonry. Lintels around corners are also very easy to produce with the EK-GE version.

MOSO® Special anchor - (Individual) support bracket EK-S

MOSO® support bracket EK-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances

MOSO®Adjustable pressing screw - FB-D

The MOSO® precast part fixing FB-D with adjustable pressing screw for the fixing of precast concrete parts. The slim design makes a reduction in heat transition possible.

MOSO® precast parts fixing FB-S

Customised MOSO® precast parts fixing FB-S is calculated individually by our engineering office, to ensure optimal solutions, even in challenging conditions.

MOSO® Universal anchor for prefabricated lintels - FB-U

The MOSO® precast part fixing FB-U is the universal anchor for the fixing of precast concrete parts. This anchor enables 3-dimensional adjustment for optimum mounting, depending on fixing.

MOSO® Scaffold fixing anchors for masonry façades - GA-Q / GA-Z

In Germany, scaffolding must be anchored in accordance with 4420-3:2006-01 or DIN 4426:2017-01. The load capacity of the MOSO® scaffold anchors GA-Q and GA-Z are calculated according to the specifications of DIN 4426:2017-01, because the loads to be anchored are adverse. Type GA-Q for tensile and lateral forces, anchoring also in cracked concrete. Type GA-Z only for tensile forces, anchoring only in non-cracked concrete.

MOSO® Special solutions - Scaffold fixing anchor GA-S

MOSO® scaffold anchor GA-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.

MOSO® Fascia facing - Horizontal connection HV-A

The MOSO® horizontal connection HV-A is the fascia restraint anchor around cracks, that can occur due to different movements of flat roofs and facing. Since the anchor is attached below the flat roof support, the movements of the flat roof have no affect on the facing.

MOSO® Horizontal connection HV-D

The MOSO® horizontal connection HV-D is the wire tie for the subsequent connection of cavity walls according to DIN EN 1996-2/NA.The anchors can be placed in various bases thanks to different versions.

MOSO® Horizontal connection with joint - HV-T

The MOSO® horizontal connection HV-T is a trapezoidal joint anchor, which makes the normally required bracing superfluous. Thanks to the the articulated connection, different movements of the outer and inner shell are compensated.

MOSO® Horizontal connection HV-L

The MOSO® horizontal connection HV-L is the air layer eyelet anchor for the subsequent connection of cavity walls according to DIN EN 1996-2/NA.The demolition of the old facing shell during restoration is not necessary since the anchoring can be done through the old shell. Likewise, these anchors can be placed in difficult anchoring bases when the sustainability is proved by tensile tests.

MOSO® Special versions - Horizontal connection HV-S

The MOSO® horizontal connection HV-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.

MOSO® Windpost fixings

Windposts are profile constructions as a base for holding the facing shell, when fixing to the supporting foundation is only possible laterally on the ground floor level.

MOSO® Wall connections with anchor - MA-A

Wall connections can be made easily using MOSO® wall anchors. The connected is made on tracks so that stepless adjustment is possible. This way settlement cracks in the brickwork are avoided to the greatest possible extent. Thanks to various types of tracks, many applications are possible including horizontal connection of facing masonry amongst others.

MOSO® Perforated tape mansonry reinforcement

The MOSO® perforated strip was developed to realise self-supporting lintels over door and window openings.

MOSO® Crash bar for invisible support - DB•HB•MBA-ES

In order to construct a invisible facing support, additional brackets are required. In the case of a brick lintel, the brackets serve to secure the positioning of bricks, while the installation components in a prefabricated lintel require a static verification or an approval

MOSO® Angle bearing WA-D/WA-M

The MOSO® angled bearing WA-M allows direct mounting to the anchorage base. With the MOSO® angle bearing WA-D large wall clearances can be bridged with the help of welded diagonal struts. Both types are used when the bracing remains visible and a closed view is desired.

MOSO® Special versions - Angle bearing WA-S

MOSO® angled bracket WA-S special versions are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.

MOSO® Angle bearing WA-Ü/WA-Z

The MOSO® angle bearing WA-Ü bridges a lintel opening. Additional fixing is not necessary since the bracket only needs to be layed. The MOSO® angle bearing WA-Z is used as an intermediate angle for bracing with a single support bracket and enables variable support bracket spacing thanks to different lengths.

MOSO® (Angle) support bracket WK-O

The MOSO® support bracket WK-O is mounting on top of the concrete surface. Thanks to this, anchoring with dowel mounting can be produced even at low concrete heights.

MOSO® (Wall) support bracket WK-Z

For bracing on corners and pillars.he MOSO® support bracket WK-Z with beam tie makes, along with the WK-D, an interesting alternative for corner formations.

MOSO® Adjustable (Angle) support bracket WK-D

The MOSO® support bracket WK-D with adjustable pressing screw is the perfect solution for bracing with a continuous angle track. With the adjustment screw concrete unevenness can be easily compensated.

MOSO® (Angle) support bracket WK-K

The MOSO® support bracket WK-K lies with its claws on the concrete. Thanks to this, the fixing is relieved, so that even at low concrete heights, frontally fixed high loads can be anchored securely.

MOSO® Special anchor - (Angle) support bracket WK-S

MOSO® support bracket WK-S special version are calculated individually by our engineers in order to ensure optimal solutions even in difficult circumstances.

MOSO® Standard - (Angle) support bracket WK-N

The MOSO® support bracket WK-N is the standard anchor for bracing with a continuous angled rail. With this anchor it is possible to realize complete bracing in corner areas using only one bracket type.

Ankerplatten_mit_Gewindebolzen2.png

Mostrar mais resultados

Einspannanker-_mit_Justierung_03.pdf (pdf)

Wilhelm Modersohn GmbH & Co. KG 01.06.2021

MODERSOHN® Stainless Steel - um aspecto brilhante para superfícies em aço inoxidável

Notícias da empresa

O novíssimo sistema de eletropolimento do MODERSOHN® Stainless Steel torna isso possível. Desde meados de Maio que superfícies de aço inoxidável visua...

Wilhelm Modersohn GmbH & Co. KG 07.11.2019

MODERSOHN® investe 2 milhões de euros

Notícias da empresa

Spenge. No início deste ano, a Wilhelm Modersohn GmbH & Co. KG reduziu temporariamente as suas vendas e produção de componentes industriais em aço ino...

Mostrar mais resultados

Kaufering, Alemanha

Hilti GmbH

Berlim, Alemanha

Bundesanstalt für Materialforschung und -prüfung (BAM)

Berlim, Alemanha

Wilhelm Modersohn GmbH & Co. KG

Programa de entrega

acessórios para fachadas

Sistemas de fixação

Sistemas de ancoragem

Acessórios de montagem

Técnicas de cavilha

Parafusos

Nozes / Lavadoras

Perfis

Produtos

duplicação

Empurrar-puxar âncora DZA

Biela suspensa FB-HE

Ligação horizontal HV-T

Suporte único EK-D

âncora do vento FB-WA

Suporte único EK-L

Suporte angular WK-M

Imagens

Modersohn_Verwaltung_2019_klein_20x13cm.jpg

MOSO® (Angle) support bracket WK-M

MOSO® Panel anchors FB-HE Type 2

MOSO® Panel anchors FB-HE Type 1

MOSO® Anchor rails MBA-CE

MOSO® Wind restraint FB-DZA

MOSO® Clamping anchor FB-E

MOSO® Gallow anchor FB-G

MOSO® Dowel connection FB-VD

MOSO® Panel anchors FB-HO1

MOSO® Panel anchors FB-HO1A

MOSO® Panel anchors FB-HO2

MOSO® Panel anchors FB-HO2A

MOSO® Stud anchor FB-SBA

MOSO® Universal butt strap FB-UZL

MOSO® Transversal stay FB-WA

MOSO® Serrated Wind Restraint With Hammerhead FB-ZK

MOSO® Serrated wind restraint with hammerhead bolt FB-ZH

MOSO® Toothed, serrated wind restraint with round hole FB-ZL

MOSO® Serrated wind restraint U-profile FB-ZU

MOSO® Serrated wind restraint with bracket FB-ZW

MOSO® Serrated wind restraint with bracket without bracing FB-ZWO

MOSO® Universal anchor - (Individual) support bracket EK-U

MOSO® Adjustable pressure screw - (Individual) support bracket EK-D

MOSO® (Individual) support bracket EK-W

MOSO® (Individual) support bracket EK-L

MOSO® (Individual) support bracket EK-M

MOSO® Adjustable pressure screw - (Individual) support bracket EK-D

MOSO® Special anchor - (Individual) support bracket EK-S

MOSO®Adjustable pressing screw - FB-D

MOSO® precast parts fixing FB-S

MOSO® Universal anchor for prefabricated lintels - FB-U

MOSO® Scaffold fixing anchors for masonry façades - GA-Q / GA-Z

MOSO® Special solutions - Scaffold fixing anchor GA-S

MOSO® Fascia facing - Horizontal connection HV-A

MOSO® Horizontal connection HV-D

MOSO® Horizontal connection with joint - HV-T

MOSO® Horizontal connection HV-L

MOSO® Special versions - Horizontal connection HV-S

MOSO® Windpost fixings

MOSO® Wall connections with anchor - MA-A

MOSO® Perforated tape mansonry reinforcement

MOSO® Crash bar for invisible support - DB•HB•MBA-ES

MOSO® Angle bearing WA-D/WA-M

MOSO® Special versions - Angle bearing WA-S

MOSO® Angle bearing WA-Ü/WA-Z

MOSO® (Angle) support bracket WK-O

MOSO® (Wall) support bracket WK-Z

MOSO® Adjustable (Angle) support bracket WK-D

MOSO® (Angle) support bracket WK-K

MOSO® Special anchor - (Angle) support bracket WK-S

MOSO® Standard - (Angle) support bracket WK-N

Ankerplatten_mit_Gewindebolzen2.png

Arquivos

Einspannanker-_mit_Justierung_03.pdf (pdf)

Notas da imprensa

MODERSOHN® Stainless Steel - um aspecto brilhante para superfícies em aço inoxidável

Notícias da empresa

MODERSOHN® investe 2 milhões de euros

Notícias da empresa