Acessórios  Fabricantes, Comerciantes, Fornecedores

WESA-Armaturen GmbH has been developing, producing and refining ball valves, as well as heating and industrial valves for over 45 years. Our products are used to open and close pipelines.

The main factory is located in Winterbach near Stuttgart. We grew again in 2016 when we opened a new administration building. We manufacture high-quality valve products at a facility covering over 8,000 m² in Germany and at numerous production cooperation sites worldwide. From in-house design to assembly and packaging, WESA is your one-stop shop!

Friedrich Ley GmbH está ao seu lado há mais de 70 anos!
Seja em novas construções ou modernização, nós desenvolvemos soluções sob medida para você, desde o queimador até a instalação completa "chave na mão".
Deixa que os nossos serviços te convençam.

It’s in the whole of Europe and beyond it that we sell our high-grade products that are used not only in the leisure sector but cover various areas of application. Thus we also produce special pumps for vending machines or special appliances for light acids and oils.
OUR PRODUCT RANGE COMPRISES THE FOLLOWING PRODUCTS:

• pumps: submersible pumps, inline pumps, diaphragm pumps and pump accessories
• special pumps: drum pumps and machine pumps, garden pumps
• fittings (mixers and taps) made of plastics and brass
• joining technology for the water supply systems, and so on
• accessories for the sectors showers, sanitary accessories, power supply, water supply as well as water level sensors and service lids
• lamps: wall lights, kitchen centres, transistor lights and combination lights
• ventilation technology: refrigeration ventilators, pipe ventilators, ventilators, and much more

In case you need something not being listed here, we would like you to contact us. We are always looking to optimize our performance range and adapt it to our customers requirements.
The basis for this is the qualification and motivation of our colleagues and the DIN EN ISO 9001 and DIN EN ISO 14001.

With FERGO Armaturen GmbH you command a competent and faithful partner for the control engineering's sector.

Decades of experience and worldwide project references for the use of our non-return valves under the extreme operating conditions of the chemical and pharmaceutical industries, refineries and plant construction confirm our company's high performance time and time again. As a world-leading specialist in the planning, design and manufacturing of check valves, bottom valves and sampling valves, RITAG focuses its products and service on achieving maximum customer benefit.
Process reliability through first-class engineering. Flexible and fast in realising your specifications and requirements. And last but not least: Maximum availability of your plant and systems by means of a global network of service partners. RITAG standard non-return valves and special designs are available in all nominal dimensions, pressure ratings and materials required for specific processes. Our engineers ensure that RITAG products operate in accordance with all international standards and regulations.

Há mais de 50 anos que a construção de condutas industriais em todo o mundo conta com as ligações flexíveis de tubos da STENFLEX® - a especialista em componentes de alta qualidade. STENFLEX® significa qualidade especial, alta qualidade e durabilidade dos produtos e está inseparavelmente ligado a juntas de dilatação de borracha e aço feitas de materiais tradicionais como EPDM, NBR, butilo e aço inoxidável.

Whether hoses for all applications, couplings, hose clamps, seals, products for odour neutralisation or transport racks, we are guaranteed to find the right one for you from over 75,000 products! Through the successful combination of quality products and services, we enable you to find customised solutions for your requirements.

MAXIMUM SAFETY AND RELIABILITY
This what Böhmer requires of its products. For 60 years in Sprockhövel and since 1999 in the second plant in Hattingen, Böhmer has been manufacturing ball valves that set standards in quality and operational safety. At the beginning, there was the idea of developing a safety shutdown valve for mining. The success of this product soon prompted our company to expand its portfolio to include oil, gas and district heating.
Böhmer now manufactures ball valves for nearly every application, in sizes from DN 3 to DN 1400 (1/8″ to 56″), suitable for pressures of up to 500 bar (Class 2500).
No fear of difficult fluids
Whether gasses, liquids or solids, sturdy designs and very durable materials are used to meet extreme demands. The absolute suitability of Böhmer ball valves has been proven by all established test and certification procedures. It is no coincidence that Böhmer products are most frequently used as references when high performance of safety shutdown valves is required.
To maintain this status, we continuously invest in modernization and innovation. In our production facilities we have one of the most modern machinery in Germany. New materials, constructions and procedures are developed in house and extensively tested. Nevertheless, we are convinced that it is ultimately the experience and motivation of our employees that make the high quality of the product possible. True to our motto: Our experience – your safety.

A gama de produtos KVT: acessórios, tanques de fermentação, prensas de fruta e de vinho, bem como fabrico por contrato. Fabricamos:Máquinas e acessórios para adegas, tais como prensas de vinho, prensas de fruta e cubas ...

A HELS foi criada em fevereiro de 2012, reunindo profissionais com mais de 20 anos de experiência no sector, para prestar serviços técnicos qualificados e aliando a sua experiência à produção para o desenvolvimento de novos produtos. A HELS tem como objetivo tornar-se uma das principais marcas no estrangeiro nesta área, utilizando o conhecimento existente, infra-estruturas tecnológicas, maquinaria e recursos humanos experientes.

Como equipa, temos o objetivo de nos tornarmos o motor da inovação no sector, bem como desenvolver novos produtos e sermos parceiros de soluções para os nossos clientes e participar em projectos significativos no país e no estrangeiro. A HELS encara o conceito de qualidade total como política de gestão e valor estratégico, colocando a satisfação do cliente e a fiabilidade acima de tudo.

ISO9001

A Dunshanpress é uma empresa especializada em fornecer soluções eficientes e mais inteligentes para ligações de tubagens em aço inoxidável.
Temos uma vasta experiência emsistemas de tubagem de prensagem de aço inoxidável, conhecemos bem o processamento de materiais, a classificação de pressão de teste, a taxa de compressão do anel em O e a estrutura dos sistemas de prensagem. Através da nossa conceção de sistemas e do fabrico normalizado de sistemas de prensagem de aço inoxidável concebidos na Europa, que podem ser adaptados a ferramentas de marcas mundiais, tais como Novopress, Rems, Klauke, Geberit Mapress, Pegler Xpress e assim por diante.
Também temos o sistema de gestão de qualidade de acordo com os certificados EN ISO9001, WRAS, DVGW, WATER MARK, RINA, LR e CE.
O nosso principal objetivo é fornecer soluções de conhecimento técnico e experiência, neste caso, também podemos fornecer serviço OEM e fabricar produtos especializados para os nossos clientes.