- 10 شركات مصنعة, تجار, متعهدون

We offer a simple, intuitive evaluation software for the precise analysis, documentation and comparability of flatness results
Lamtech interferometers are based on the principle of grazing incidence of light, thus matte as well as polished parts can be meas...
It is possible to measure parts with a diameter up to 620mm
interferometric measuring systems for non-contact flatness measurement of finish-machined as well as polished precision parts

وصف

Interferometric measuring systems for non-contact flatness measurement of finish-machined parts.
TOPOS interferometers operate according to the principle of grazing incidence of light. The flatness of also rougher parts can be measured, which show no more fringe pattern with optical flats or Fizeau-interferometers. Next to lapped or ground parts also polished parts can be measured.

بيانات تقنية

By default, TOPOS flatness measuring instruments are available with two different sizes of measuring field: with a diameter of 100mm or 50m. An adaptation towards special sizes is possible according to request.

The absolute accuracy is up to 0.1µm over the entire measurement area

The time of measurement takes less than 2 seconds

Due to the non-contact process, the measurement instruments can be applied in the 100% control

Due to the extension by a cross- or rotary table it is possile to measure parts with an outer diameter of 620mm

مجالات الاستخدام / مجالات الاستبدال

The parts may consist of diverse materials:

metal (steel, aluminium, bronze, copper, etc.)

ceramic (AL2O3, SiC, SiN, etc.)

plastic material (thermoplastic, thermoset etc.)

graphite

Examples of application areas:

components of fuel and diesel pumps

pumps for power steering

water pumps

cutting tools

control valves

sealing valves

mechanical seals

ceramic sealing discs

sealing components

قراءة المزيد

أجهزة اختبار | صناعة معدات الاختبار

من نحن

QS-GRIMM GmbH ist Ihr Komplettdienstleister wenn es um diese Themen geht

Messtechnik
Qualitätsmanagement
Projektmanagement
Konstruktion

QS-Grimm GmbH ist Ihr Kalibrierlabor

akkreditiert für die Messgrößen Länge und Drehmoment im Deutschen Kalibrierdienst (DKD)
zertifiziert nach DIN EN ISO 9001:2000 und VDA 6.2

قراءة المزيد

أجهزة اختبار | صناعة معدات الاختبار | أجهزة أختبار الخرسانات

أجهزة اختبار | صناعة معدات الاختبار | أجهزة اختبار خاصة

أجهزة اختبار | أداة اختبار التجويفة | أجهزة اختبار خاصة

أجهزة اختبار تركيز | أجهزة اختبار الصلابة

شركات مصنعة، تجار، موردون، مزودو خدمات

10 شركة (شركات) بخصوص ✓ الشركات المُصَنِّعة والتجار والموردين بقطاع المعاملات التجارية من 3 دولة (دول) ✓ مع خدمة خاصة للبحث السريع عن المعلومات والأسعار ✓