سیم خم  تولیدکنندگان، عرضه‌کنندگان، توزیع‌کنندگان

Hereby we would like to present our new product catalogue for 2011. Since our mission is to develop and deliver lightning
protection solutions that meet the expectations of our customers, in 2011 we continue improving the production process.
In 2010 we introduced new anti – corrosion solutions for SILVER and PLATINIUM, series. The previous coverage has received
the name gold. Additional explanations you will find in “informations” chapter.
We know our customers want our products to be compliant with current standards, corrosion resistant and easily installable.
Therefore all our solutions meet those expectations. Additionally our team of consultants offers assistance in designing lightning
protection systems, and our production department is ready to manufacture unusual components.
As the only polish company in the field of lightning protection we have decided to maintain a standard to apply 12 μm thick
galvanic coating and yellow chromating. Electrogalvanised components are fabricated according to the standard pn-en
12329:2002 (corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel).
Parameter correctness of the coatings on our products is supervised by the personnel of the galvanising plant where the latest
state-of-the-art methods and third-generation chemical agents are used to ensure the highest anticorrosion properties. We
also apply an additional sealing in the form of an exceptionally corrosion resistant organic polymer film to a galvanic coating (fe/
zn12/c/t2 according to the standard pn-en 1403:2002).
We galvanise all components – even screws and nuts – by ourselves. Hot-dip galvanised steel components fulfil the requirements
of the standard pn-en iso 1461:2000 (hot-dip galvanised coatings on fabricated iron and steel articles. Specifications and test
methods) and pn-en 13811:2005 (sherardizing. Zinc diffusion coatings on ferrous products. Specification; this applies to small
components). We use only proven quality certified materials. Our products were positively tested in a salt spray chamber proving
their excellence. The comparison of anticorrosion resistance of components available on the polish market can be found at
http://www.Ah.Com.Pl/information. The advantages of the aforementioned technological process enabled us to grant a 3-year
anticorrosion warranty for our products.
The company A.H. Hardt sp.j. Offers over 1000 variations of electrogalvanised, hot-dip galvanised, copper and brass
lightning protection components. On request we produce stainless steel components. We can also sherardise some of the
components.
All our products are fabricated with the use of instruments thus being repeatable. In compliance with the iso 9001:2000 procedures
we issue certificates of conformity, and according to the “b” sign certificate we can issue certificates of quality.
The company protects its solutions by means of patenting utility models with the patent office of the republic of poland. Having
registered 24 utility models we are the leader in the industry. In order to protect our customers from purchasing counterfeit
merchandise we mark our components with the company’s logo. Additionally our products have barcodes (ean13).
Our research and development department ensures not only that the offered components satisfy our standards, but also that
they comply with existing regulations and customers’ demands. The offered solutions are easily installable since they require the
use of only one type of spanner. The proper selection of dimensions of the products allows for sufficiently strong connections.
Information regarding novelties is first published at our website http://www.Ah.Com.Pl.
We make every effort to ensure that our offer is distinguished first of all by high quality. We implement our solutions with great
care. All our systems will guarantee you the comfort of installation and safety of use.
With kind regards,
Adam Hardt

BSB – Blechbearbeitung - Stanzwerk - Beschichtungstechnik
BWB – Behälter - Werk Burgau
Mit mehr als 30 Jahre Erfahrung im Bereich Stanz- und Ziehtechnik und mehr als 40 Jahre führend im Behälterbau steht Ihnen ein erfahrener und leistungsstarker Partner zur Seite, der Ihnen mit modernsten Vorbereitungs- und Fertigungsmethoden hilft, die gesteckten Ziele zu verwirklichen und den Erfolg über Jahre hinaus zuverlässig zu sichern.
Unser Ziel lautet: „Die kompletten Wünsche unserer Kunden zu erfüllen."
Unsere Kunden sind von Beginn an in die Entwicklung ihres Produkts miteingebunden. Topflexibel, rationell und just in time fertigen wir mit einem hochmodernen Maschinenpark zu marktgerechten Preis vom Einzelstück bis zur Serie alles nach Ihren individuellen Vorstellungen.
Wussten Sie...?
Dass die ICE-Hochgeschwindigkeitszüge mit BWB-Druckluftbehältern fahren.

1840 gegründet
1949 zwangsenteignet, bis 1990 Volkseigener Betrieb
1998 neu errichtete Produktionsstätte

• 8.000 qm Fläche
• 1.000 qm für den Werkzeugbau
• 80 Mitarbeiter
• 8 Lehrlinge
• 6 Mio. EUR Umsatz

The management of the company has a wealth of experience spanning over 30 years in the ceiling and drywall cold forming machine industry, and it is renowned for producing automatic roll forming machines of impeccable quality.
Kaigui Machinery boasts an exceptional team of technical researchers and developers, as well as highly skilled technical workers who have been a part of Kaigui Machinery’s journey from its inception to its current standing.
The firm allocates 30% of its yearly profits to research and development, guaranteeing that our machine is updated annually with new processes, materials, or technologies. This results in a stable, highly automated system with high production efficiency.
Kaigui Machinery’s experience and expertise in T-bar and light steel keeling has helped us build a unique niche, allowing us to collaborate with international false ceiling and drywall manufacturers. We supply cutting-edge machinery and translate their specific T-bar designs and requirements into metal profiles that meet installation and functional needs.
Kaigui’s progress has reaffirmed its prosperous ethos that quality and technology are the bedrock of Kaigui Machinery, and devotion and determination are the spirit of Kaigui.
This has facilitated Kaigui in building sustained and satisfactory relationships with its clients. Kegui machines are transported to more than 50 countries, including Africa, India, Southeast Asia, the Middle East and West Asia; one can indeed find a Kaigui t bar machine in most large-scale T-grid & metal ceiling materials production plant workshops.
This makes Kaigui Machinery the ideal choice for China cold roll forming machines.

Vermittlung und Begleitung vom Erstmuster bis zur Serienbelieferung für:
Drahtbiegeteile , Kunststoff Spritzguss , Rohrbiegeteile , Schweißbaugruppen , Blechbiege- und Stanzteile
Planungsdienstleistung , Unterstützung bei der Industrialisierung

Kreutz & Mock zählt zu den führenden Unternehmen als Hersteller von Drahtbiegeteilen aller Art. Mit über 3000 verschiedenen Artikeln können wir unseren Kunden ein großes und breit gefächertes Sortiment an unterschiedlichsten Drahterzeugnissen anbieten. Die hierfür nötigen Maschinen entwickeln und bauen wir im hauseigenen Maschinenbau seit jeher selbst und können so flexibel auf alle Anforderungen unserer Kunden reagieren.

Die Menke GmbH aus Neuenrade hat sich seit 1995 zu einem Spezial-Lieferanten für individuelle Draht- und CNC-Biegeteile, Stanz- und Stanzumformteile sowie Technische Federn und Lampenschutzgitter entwickelt. Bei den Kunden ist die Menke GmbH vor allem als Problemlöser bekannt. Ein Standard-Produktprogramm existiert nicht