42 企業:対象スライドバルブ ✓ 5か国のB2Bメーカー、ディーラー、サービスプロバイダー ✓ 迅速な情報と価格の特別サービス付き ✓
65468 Trebur-Astheim, ドイツ
AKO Armaturen & Separationstechnik GmbH
製造業者 ✓ 販売事業者 ✓企業の紹介
さらに読む... AKO Armaturen はドイツの会社です。
当社は1984年にアントワーヌ・コップによって創立され、翌1985年からピンチバルブの開発と販売が開始されました。1996年には、フランスに独立子会社AKO Innovations S.A.S. が設立されました。製造はドイツとフランスで行っております。
AKO のバルブや金具は、摩擦性の高いまたは繊維質の、または腐食性の高い流体の封止や制御を得意といたしますが、最近ではそれほど取り扱いが難しくない物質でもAKO製品を使って遮断されたり、封止されたり制御されたりすることが増えています。
当社は1984年にアントワーヌ・コップによって創立され、翌1985年からピンチバルブの開発と販売が開始されました。1996年には、フランスに独立子会社AKO Innovations S.A.S. が設立されました。製造はドイツとフランスで行っております。
AKO のバルブや金具は、摩擦性の高いまたは繊維質の、または腐食性の高い流体の封止や制御を得意といたしますが、最近ではそれほど取り扱いが難しくない物質でもAKO製品を使って遮断されたり、封止されたり制御されたりすることが増えています。
企業の紹介
With FERGO Armaturen GmbH you command a competent and faithful partner for the control engineering's sector.
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | 適量計測用仕切り弁
- スライドバルブ | 遮断弁 | 適量計測用仕切り弁
26789 Leer (Ostfriesland), ドイツ
ASAK ARMATUREN SERVICE GmbH
製造業者 ✓ 販売事業者 ✓ サプライヤー ✓ サービス業者 ✓ 企業プロフィール 問合せを送信する
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | ナイフゲート弁
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | 平プレートスライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁
- スライドバルブ | 遮断弁 | 導管仕切り弁
- スライドバルブ | 遮断弁 | コイルスライダー
- スライドバルブ
企業の紹介
さらに読む... Over 50 years' experience and success in valve constructionLOHSE Knife Gate Valves for the Paper and Chemical Industry
Long before the actual start of our valve development and
production programme in 1962, we were already partners
of the paper industry. As manufacturers of pulp vats,
containers and machine parts our specialists were always
present when it was a matter of solving problems at our
customers. It was therefore a logical step that we also
addressed the problems of valve technology handling pulp
and fibre.
The complete development of our knife gate valves rests always
on close coordination with the experts from paper and
paper machine manufacturers. This evolution began with
valves made of cast iron and continued with valves lined
with stainless through to today with valves made of
corrosion and acid resistant stainless steel. The reject
valves that were developed parallel to this and were
conceived for the problem positions in waste paper processing, have
since become the standard in recycling paper mills.
We are now the only renowned manufacturer of knife gate valves
with a service-friendly two-part housing. All others have
long since abandoned this design because of
manufacturing costs and now only have valve bodies with a
one part housing. But the simplest way of replacing
wearing parts is if the housing is in two parts. In
addition, the one-part housing has the following further disadvantage:
the space for inserting the valve plate in the housing
has to be relatively large and this increases the danger
of blocking and draining paper fibres. With our valve,
this problem is prevented by the narrow tolerances
between the valve plate and the smooth-running plastic
internal shell. The valve guides are emptied via a specially shaped
sturdy valve plate. A sophisticated system for attaching
accessories and the drives - which are found here as the
LOHSE modular system - is another advantage of our
concept.
Long before the actual start of our valve development and
production programme in 1962, we were already partners
of the paper industry. As manufacturers of pulp vats,
containers and machine parts our specialists were always
present when it was a matter of solving problems at our
customers. It was therefore a logical step that we also
addressed the problems of valve technology handling pulp
and fibre.
The complete development of our knife gate valves rests always
on close coordination with the experts from paper and
paper machine manufacturers. This evolution began with
valves made of cast iron and continued with valves lined
with stainless through to today with valves made of
corrosion and acid resistant stainless steel. The reject
valves that were developed parallel to this and were
conceived for the problem positions in waste paper processing, have
since become the standard in recycling paper mills.
We are now the only renowned manufacturer of knife gate valves
with a service-friendly two-part housing. All others have
long since abandoned this design because of
manufacturing costs and now only have valve bodies with a
one part housing. But the simplest way of replacing
wearing parts is if the housing is in two parts. In
addition, the one-part housing has the following further disadvantage:
the space for inserting the valve plate in the housing
has to be relatively large and this increases the danger
of blocking and draining paper fibres. With our valve,
this problem is prevented by the narrow tolerances
between the valve plate and the smooth-running plastic
internal shell. The valve guides are emptied via a specially shaped
sturdy valve plate. A sophisticated system for attaching
accessories and the drives - which are found here as the
LOHSE modular system - is another advantage of our
concept.
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | 遮断弁 | スライダー
- スライドバルブ | スライダー
- スライドバルブ | 遮断弁
- スライドバルブ | スライダー
- スライドバルブ | スライダー | クイッククローズゲートバルブ
- スライドバルブ | 遮断弁
スライドバルブ - 製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先
当社の特別サービス用フォームを使用して、検索クエリをスライドバルブに入力してください。
当社のIndustryStockチームがご要望に応じてすみやかにスライドバルブの最適なメーカー、ディーラー、サービスプロバイダーを見つけ、貴社のメールメッセージをご希望の対象グループに転送します。
スライドバルブをお探しですか?
ビジネスで スライドバルブをお探しですか?IndustryStockの製品とサービスの検索エンジンは、 スライドバルブ 関連のヒットを表示するだけではありません。 スライドバルブ と並んで、さらにその他の製品やサービスも探すことができます。 スライドバルブ をテーマに登録されているメーカーやディーラーの連絡先データ全ては、全ユーザーが自由に見られます。
このページの情報をどのように評価しますか?
12 評価 98%