24 企業：対象はんだ用バーナー ✓ 4か国のB2Bメーカー、ディーラー、サービスプロバイダー ✓ 迅速な情報と価格の特別サービス付き ✓
企業の紹介
さらに読む... The company Borrmann Brenner Berlin GmbH was founded in 1949 in Berlin. During the starting years mainly burners for warming up bitumen for small crafts enterprises, in particular the building and roofing trade, were produced.
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
With the spreading of Liquid gas / Propane as mobile and clean energy source new possibilities within the building industry for the replacement of the up to then usual heating up with coal or combustion of wood resulted.
Business contacts to the Federal Post Office led in the following years to an extension of the production of the product line burner handles for soldering work as well as burners for bitumen digesters to filling joint boxes.
The acquisition of big customers was the defined marketing target. Firm philosophy oriented already very early on innovative products with excellent quality and an intensive customer care. Further customers, like the German Federal Railroads and a number of large companies in the power industry, could also be won by this strategy.
When at the beginning of the seventies the Federal Post Office changed the technology of cable connection, there was no suitable burner set on the market for the handling of the new shrinking hoses.
With one of the Borrmann Brenner Berlin GmbH developed burner novelty this market gap could be closed and the entire Federal Postal Administration equipped.
Since this development also the telecommunications enterprises in Belgium, Switzerland, Austria, Bulgaria, South Africa and a lot of other countries were supplied with these burners. At present the main focus is on the market exploitation in Eastern Europe, in Great Britain and North Africa.
Towards the end of the 70's Borrmann Brenner Berlin GmbH also succeeded in largely filling the market segment of gas burners for road construction machines by actively offering attractive solutions.
In 1994 company headquarters and production were shifted to Baruth / Mark – OT Schöbendorf in Brandenburg, south of Berlin.
Since 1998 the company is certified by DIN-ISO 9001-2000.
The most essential products are:
- Propane tools and burners for cable construction
- Regulating technology and special burners for road building machines
- Burners for other applications and industry
- はんだ用バーナー | はんだ付け装置 | 溶接トーチ
- はんだ用バーナー | はんだ技術 | はんだ付け装置
57234 Wilnsdorf-Niederdielfen, ドイツ
Grün GmbH SPEZIALMASCHINENFABRIK
製造業者 ✓ 販売事業者 ✓ サービス業者 ✓ 企業プロフィール 問合せを送信する
企業の紹介
さらに読む... The know-how from over four decades of market presence and intensive cooperation with considerable producers of marking material is the basis of our success in developing future-oriented, high-quality marking machines.
Thereby, our customer’s demands always take centre stage of our work, because your success is our claim!
GRÜN’s product range offers adequate machine technology for every marking challenge, starting with small walk-behind units, over diverse self-propelled sit-on machines to marking trucks with a maximum of capacity. Furthermore, GRÜN provides you with road lane dryers, demarcate milling machines, thermoplastic pre-heaters, bead dispensers, marking material, transport trailers etc. Naturally, as experienced producer of special machines, we also produce special equipment and customized machines, fitted to the user’s individual demand.
Do you want to apply paint, cold spray plastic, cold plastic, thermoplastic or hot spray plastic? Shall flat lines, agglomerates or profiles be applied, single-, double-, or multiple lines? Do you ask for the most modern computer technique and control technology? GRÜN delivers suitable equipment for every demand!
Our indoor- and our field service will gladly advise you on your purchase decision; demonstrations are normally also possible according to arrangements. A detailed training of the operating personnel in case of the commissioning of more complex equipment is understood. Additionally, our competent service-team will be at your disposal with words and deeds, also via emergency telephone beyond common business hours and of course, if required, also on site. Our extensive repository and efficient logistics guarantee the short-term delivery of current spare parts at any time.
Have confidence in our service capability! GRÜN- your competent partner for marking techniques!
Thereby, our customer’s demands always take centre stage of our work, because your success is our claim!
GRÜN’s product range offers adequate machine technology for every marking challenge, starting with small walk-behind units, over diverse self-propelled sit-on machines to marking trucks with a maximum of capacity. Furthermore, GRÜN provides you with road lane dryers, demarcate milling machines, thermoplastic pre-heaters, bead dispensers, marking material, transport trailers etc. Naturally, as experienced producer of special machines, we also produce special equipment and customized machines, fitted to the user’s individual demand.
Do you want to apply paint, cold spray plastic, cold plastic, thermoplastic or hot spray plastic? Shall flat lines, agglomerates or profiles be applied, single-, double-, or multiple lines? Do you ask for the most modern computer technique and control technology? GRÜN delivers suitable equipment for every demand!
Our indoor- and our field service will gladly advise you on your purchase decision; demonstrations are normally also possible according to arrangements. A detailed training of the operating personnel in case of the commissioning of more complex equipment is understood. Additionally, our competent service-team will be at your disposal with words and deeds, also via emergency telephone beyond common business hours and of course, if required, also on site. Our extensive repository and efficient logistics guarantee the short-term delivery of current spare parts at any time.
Have confidence in our service capability! GRÜN- your competent partner for marking techniques!
- はんだ用バーナー | 融剤 | はんだ吸い取り機
- はんだ用バーナー | 融剤 | はんだごて
- はんだ用バーナー | ろう付け技術 | はんだ付け装置
- はんだ用バーナー | はんだ吸い取り機 | ろう付け技術
- はんだ用バーナー | はんだ吸い取り機 | はんだごて
- はんだ用バーナー | はんだ吸い取り機 | はんだごて
- はんだ用バーナー | 融剤 | はんだごて
- はんだ用バーナー | 溶接トーチ | バーナー
- はんだ用バーナー | ブロー球 | 手はんだ付け装置
- はんだ用バーナー | はんだ技術 | 融剤
- はんだ用バーナー | はんだ付け工具 | はんだ付け装置
- はんだ用バーナー | ろう付け技術 | はんだ
- はんだ用バーナー | ろう付装置 | はんだ付け機
- はんだ用バーナー | はんだ技術 | はんだ吸い取り機
- はんだ用バーナー | はんだ技術 | はんだ
- はんだ用バーナー | プロパンはんだ付け技術 | 燃焼バーナー
- はんだ用バーナー | はんだごて
- はんだ用バーナー
企業の紹介
Ti-Research produziert seit 2000 kompakte Schleudergiessgeräte, Werkzeuge und OEM-Einbettmassen für Goldschmiede und Dentallabore.
- はんだ用バーナー | バーナー | ブロー・トーチ
はんだ用バーナー - 製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先
当社の特別サービス用フォームを使用して、検索クエリをはんだ用バーナーに入力してください。
当社の特別チームがご要望に応じてはんだ用バーナーの適切なメーカー、ディーラー、サービスプロバイダーを探し、ご要望を直接対象のグループに転送します。
はんだ用バーナーをお探しですか？
ビジネスで はんだ用バーナーをお探しですか？IndustryStockの製品とサービスの検索エンジンは、 はんだ用バーナー 関連のヒットを表示するだけではありません。 はんだ用バーナー と並んで、さらにその他の製品やサービスも探すことができます。 はんだ用バーナー をテーマに登録されているメーカーやディーラーの連絡先データ全ては、全ユーザーが自由に見られます。
このページの情報をどのように評価しますか？
25 評価 94%