7 企業：対象シリンダー圧力測定 ✓ 4か国のB2Bメーカー、ディーラー、サービスプロバイダー ✓ 迅速な情報と価格の特別サービス付き ✓
- シリンダー圧力測定
- シリンダー圧力測定 | 圧力計
- シリンダー圧力測定 | 圧力測定技術 | 温度測定
企業の紹介
さらに読む... HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- シリンダー圧力測定 | 圧力測定器 | シリンダー圧力計
- シリンダー圧力測定 | 圧力計 | 差異圧力測定
- シリンダ圧測定 - 熱効率と機械効率（p-V図
説明
さらに読む... ピストンエンジンにおけるシリンダ圧力の測定方法及び装置
シリンダー圧力測定 - 製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先
時間を節約したい場合は、当社の特別サービス用フォームにシリンダー圧力測定を入力してください。
当社のIndustryStockチームがご要望に応じてすみやかにシリンダー圧力測定の最適なメーカー、ディーラー、サービスプロバイダーを見つけ、貴社のメールメッセージをご希望の対象グループに転送します。
シリンダー圧力測定をお探しですか？
ビジネスで シリンダー圧力測定をお探しですか？IndustryStockの製品とサービスの検索エンジンは、 シリンダー圧力測定 関連のヒットを表示するだけではありません。 シリンダー圧力測定 と並んで、さらにその他の製品やサービスも探すことができます。 シリンダー圧力測定 をテーマに登録されているメーカーやディーラーの連絡先データ全ては、全ユーザーが自由に見られます。
このページの情報をどのように評価しますか？
6 評価 100%