試験証明書  製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先

HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.

The Beckmann & Jörgensen GmbH covers all survey tasks in the national and international trade.
Our qualified personnel have many years experience in the inspection of ship, truck and container cargoes, we also have extensive expertise in the fruit sector. We report daily during the survey and are always available for consultation or advice.
Beckmann & Jörgensen GmbH performs, as a representative of B.I.S. in Tehran, pre-shipment inspections for machines and goods for shipment to Iran.
We pre-inspect the cargo at origin to ensure that the specifications in the Letter of Credit are met and monitor the loading.
Beyond that we do inspections of technical products on completeness, soundness, etc.
In order to export second-hand machinery to India your customer needs a so-called Chartered Engineer Cert. (CEC) for the customs declaration. Otherwise the import can be refused and heavy penalties incurred. As an independent assessor we issue such certificates.

SCC認証GmbHは、DAkkS認定検査機関として、企業のSCC認証（安全認証請負業者）をサポートしています。SCC規則（Doc.017およびDoc.018）に基づき、石油化学および鉱物油処理会社で作業員、監督者、管理者に必要とされる重要な人材証明書へのアクセスを容易にすることに重点を置いています。