6 企業：対象検査業務 ✓ 2か国のB2Bメーカー、ディーラー、サービスプロバイダー ✓ 迅速な情報と価格の特別サービス付き ✓
- 検査業務 | 試験業務 | ファーストサンプル
企業の紹介
さらに読む... HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 検査業務
- 検査業務
- 検査業務 | 製品試験 | 放射線検査
- 検査業務 | 試験業務 | 検査する
検査業務 - 製造業者, 販売業者, サプライヤー, 供給業者, 仕入れ先
時間を節約したい場合は、当社の特別サービス用フォームに検査業務を入力してください。
当社が検査業務の適切なメーカー、ディーラー、サービスプロバイダーを探し、ご依頼を直接これらの企業に転送します。
検査業務をお探しですか？
ビジネスで 検査業務をお探しですか？IndustryStockの製品とサービスの検索エンジンは、 検査業務 関連のヒットを表示するだけではありません。 検査業務 と並んで、さらにその他の製品やサービスも探すことができます。 検査業務 をテーマに登録されているメーカーやディーラーの連絡先データ全ては、全ユーザーが自由に見られます。
検査業務 - 同義語, /
- 試験課題
- 試験の課題
このページの情報をどのように評価しますか？
7 評価 92%