25 금속 막대 관련 회사 ✓ 4의 B2B 제조업체, 판매업체& 공급업체 ✓ 신속하게 내용 및 가격 정보를 검색해주는 특별 서비스 ✓
- 금속 막대
- 금속 막대
- 금속 막대
90513 Zirndorf, 독일
Blech + Profil RL Edelstahlhandelsgesellschaft mbH
제조업체 ✓ 딜러 ✓ 공급업체 ✓ 서비스업체 ✓ 회사 프로필 문의하기
- 금속 막대 | 스테인레스 스틸 파트
- 금속 막대 | 하드웨어
- 금속 막대 | 철강 제품
당사 소개
내용보기 Drozapol-Profil was established in 1993.
2001 – Drozapol-Profil became a general company.
2002 – Drozapol-Profil turnover had increased to over 5000 MT
2004 – Drozapol-Profil became a joint-stock company.
Drozapol-Profil has been active in the Polish metals industry since its establishment in 1993. Currently we are one of the biggest steel distributors in Poland, offering metallic products and semi-finished steel. The company deals in non-alloy steel products, especially flat and round bars, hollow profiles and tubes. We also provide preliminary steel processing and a transportation service.
Drozapol-Profil has its own service centre and provides steel cutting and steel bending services. Drozapol-Profil is a trusted and attractive business partner for both buyers and suppliers and this makes the company one of the best participants in the Polish steel market.
Currently the company is enhancing its market position by increasing sales in all areas of Poland and widening the range of reinforcing products available. The service centre in Ostrowiec Świętokrzyski will offer comprehensive steel uncoiling and cutting services.
Drozapol-Profil has a distinct strategy of diversification and it is establishing capital partnerships with other companies.
To guarantee the highest quality of service, the company has put ISO 9001:2000 norms and standards into practice.
The main customers of the company are manufacturers who account for 80% of the company’s turnover. Apart from them our customers are steel wholesalers, craft-workshops, small companies and individuals.
2001 – Drozapol-Profil became a general company.
2002 – Drozapol-Profil turnover had increased to over 5000 MT
2004 – Drozapol-Profil became a joint-stock company.
Drozapol-Profil has been active in the Polish metals industry since its establishment in 1993. Currently we are one of the biggest steel distributors in Poland, offering metallic products and semi-finished steel. The company deals in non-alloy steel products, especially flat and round bars, hollow profiles and tubes. We also provide preliminary steel processing and a transportation service.
Drozapol-Profil has its own service centre and provides steel cutting and steel bending services. Drozapol-Profil is a trusted and attractive business partner for both buyers and suppliers and this makes the company one of the best participants in the Polish steel market.
Currently the company is enhancing its market position by increasing sales in all areas of Poland and widening the range of reinforcing products available. The service centre in Ostrowiec Świętokrzyski will offer comprehensive steel uncoiling and cutting services.
Drozapol-Profil has a distinct strategy of diversification and it is establishing capital partnerships with other companies.
To guarantee the highest quality of service, the company has put ISO 9001:2000 norms and standards into practice.
The main customers of the company are manufacturers who account for 80% of the company’s turnover. Apart from them our customers are steel wholesalers, craft-workshops, small companies and individuals.
- 금속 막대
- 금속 막대 | 텅스텐 금속 로드
- 금속 막대 | 하드웨어 | 철강 제품
- 금속 막대
- 금속 막대 | 금속철판
- 금속 막대 | 금속 포일 | 텅스텐 금속 로드
- 금속 막대 | 정밀 로드
당사 소개
METKOM Limited is one of the top Polish distributors of stainless metal products as well as experts in the utilization of recyclable waste.
With over a thousand customers in Poland and the European Union, the company owes its success to its experienced personnel, innovative solutions and the wide range of materials at its disposal.
With over a thousand customers in Poland and the European Union, the company owes its success to its experienced personnel, innovative solutions and the wide range of materials at its disposal.
- 금속 막대 | 확장 금속
- 금속 막대
- 금속 막대 | 금속 포일
- 금속 막대 | 정밀 로드
당사 소개
내용보기 20여년간의 도검, 선반, 려과, 탄화월프람, 고속철 및 부속품.
EUL WERKZEUGE는 도구 제조, 도구 제조, 도구 제조, 판매 등 현대적인 전문 제품 공급업체입니다. 홈 페이지에 액세스하거나 이메일을 보내 현재 정보와 서비스를 문의하십시오.
1990년부터 고객들은 정밀한 반제품과 소재의 전문 지식을 믿고 있습니다.
클로펜부르크에 본사를 둔 EUL Werkzeuge는 2018년 다음 세대에게 인수됐다. 우리 가족 기업은 적격한 고객 서비스, 유연성과 품질을 대표하고 있습니다. 우리는 재고품이 있기 때문에, 우리는 신속하게 당신의 요구를 만족시킬 수 있습니다.
또한 HSS 반제품, 원봉, HSS 사용자 정의 제품, 기계 설치 보조, 스트림 드릴에서 클립에 이르기까지 전문가 지식을 제공합니다.
EUL WERKZEUGE는 도구 제조, 도구 제조, 도구 제조, 판매 등 현대적인 전문 제품 공급업체입니다. 홈 페이지에 액세스하거나 이메일을 보내 현재 정보와 서비스를 문의하십시오.
1990년부터 고객들은 정밀한 반제품과 소재의 전문 지식을 믿고 있습니다.
클로펜부르크에 본사를 둔 EUL Werkzeuge는 2018년 다음 세대에게 인수됐다. 우리 가족 기업은 적격한 고객 서비스, 유연성과 품질을 대표하고 있습니다. 우리는 재고품이 있기 때문에, 우리는 신속하게 당신의 요구를 만족시킬 수 있습니다.
또한 HSS 반제품, 원봉, HSS 사용자 정의 제품, 기계 설치 보조, 스트림 드릴에서 클립에 이르기까지 전문가 지식을 제공합니다.
- 금속 막대 | 구리 제품
- 금속 막대 | 스테인레스 스틸 파트
- 금속 막대
당사 소개
내용보기 2008년 이래로 테크노탈리아 인더스트리얼 프로덕츠(Tecnoitalia Industrial Products)는 반제품 금속 원자재에 대한 자문 및 공동 설계 서비스를 제공해 왔다. 여러 해 동안, 우리는 각 산업 분야에 집중하여, 고객의 요구를 충분히 만족시키기 위해 더욱 종합적인 서비스를 개발했다. 다년간의 개인과 기업 경험을 바탕으로, 우리는 고객과 협력하여 신제품과 새로운 프로젝트를 개발할 수 있다
이탈리아 전역에 있는 다양한 전문 생산 업체에서 우리는 원형 전선, 사각형 전선, 특수 형태, 편평한 전선, 막대, 리본, 코일, 도금 처리 등을 생산한다.
1) 브러시 장치
생산: 견사, 열처리, 열도금
직경은 0.08mm에서 지원됩니다(요구 사항에 따라 더 작은 직경이 생산될 수 있음).
재료: 구리, 황동 또는 청동(필요한 경우 기타 금속)
말기, 꼬기, 스풀랩
2) 첫 번째 스크롤 유닛
제조 가능한 횡단면은 10평방피트까지 올라간다. 밀리미터
프로덕션: 슬래브, 리본, 선 및 사각형 또는 직사각형 단면, 특수 및 사용자정의 강 쉐이프
재료: 동, 황동, 청동, 알루미늄, 스테인리스, 탄소강(기타 금속 요구 사항)
말기, 꼬기, 스풀싸기.
3) 두 번째 압연 및 인장 단위
8평방 피트의 제조 가능한 부분 음..
생산: 슬래브, 둥근 선, 사각형 또는 직사각형 단면 선, 특수 및 사용자정의 강 쉐이프
두께 0.03mm부터 시작
열처리 및 열표면처리
재료: 동, 황동, 청동, 알루미늄, 스테인리스강, 탄소강(고객의 요구에 따라 기타 금속 제공 가능)
포장: 말기, 막대기, 꼬기, 말기
4) 권재절단장치(종단기)
강철 롤, 강철 벨트, 편평한 강철 및 강철 벨트
두께 0.03mm부터 시작
재료: 동, 황동, 청동, 스테인레스스틸(기타 금속 요구사항)
5) 전기도금처리장치
둥근 선, 사각형 선, 특수 강 쉐이프, 슬래브, 스트랩된 토량 대 토량 도금
최소 두께 0.05mm
재질: 구리, 황동, 청동, 탄소강(기타 금속 요구 사항)
치료도 계약대로 한다
Tecnoitalia Prodotti Industriali, dal 2008, fornisce materie prime semilavorate in metallo, con servizi di consulenza e di co-design. Specializzati in diversi ambiti industriali, abbiamo sviluppato negli anni servizi più completi per soddisfare appieno le esigenze dei nostri clienti. Siamo in grado di collaborare con i clienti per nuovi prodotti e nuovi progetti portando la nostra pluriennale esperienza personale ed aziendale
In differenti e specializzate unità produttive dislocate sul territorio Italiano, produciamo fili tondi, fili quadri, profili speciali, piattine, barre, nastri, coils, e trattamenti galvanici.
1) Unità di Trafileria
Produzione di: Filo trafilato, Trattamenti termici, Stagnatura a caldo
Diametri producibili da 0,08 mm (è possibile produrre diametri inferiori su richiesta)
Materiali: rame, ottone o bronzo (altri metalli su richiesta)
Confezioni in coil, matasse, bobine
2) Prima unità di Laminazione
Sezioni producibili fino a 10 mmq
Produzione di: Piattine, ribbons, fili a sezione quadra o rettangolare, profili speciali e a disegno
Materiali: rame, ottone, bronzo, alluminio, acciaio inossidabile, acciaio al carbonio (altri metalli su richiesta)
Confezioni in coil, matasse, bobine.
3) Seconda unità di Laminazione e Trafileria
Sezioni producibili da 8 mmq
Produzione di: Piattine, fili tondi, fili a sezione quadra o rettangolare, profili speciali e a disegno
Spessori sottili a partire da 0,03 millimetri
Trattamenti termici e trattamenti superficiali a caldo
Materiali: rame, ottone, bronzo, alluminio, acciaio inossidabile, acciaio al carbonio (altri metalli su richiesta del cliente)
Confezioni: in coils, barre, matasse, bobine
4) Unità di taglio coils (slitters)
Coils, nastri, piattine e bandelle
Spessori sottili a partire da 0,03 millimetri
Materiali: rame, ottone, bronzo, acciaio inossidabile (altri metalli su richiesta)
5) Unità per Trattamenti galvanici
Trattamenti galvanici reel-to-reel su fili tondi, fili quadri, profili speciali, piattine, nastri
Spessore minimo 0,05 millimetri
Materiali: rame, ottone, bronzo, acciaio al carbonio (altri metalli su richiesta)
Si eseguono trattamenti anche in conto lavorazione
이탈리아 전역에 있는 다양한 전문 생산 업체에서 우리는 원형 전선, 사각형 전선, 특수 형태, 편평한 전선, 막대, 리본, 코일, 도금 처리 등을 생산한다.
1) 브러시 장치
생산: 견사, 열처리, 열도금
직경은 0.08mm에서 지원됩니다(요구 사항에 따라 더 작은 직경이 생산될 수 있음).
재료: 구리, 황동 또는 청동(필요한 경우 기타 금속)
말기, 꼬기, 스풀랩
2) 첫 번째 스크롤 유닛
제조 가능한 횡단면은 10평방피트까지 올라간다. 밀리미터
프로덕션: 슬래브, 리본, 선 및 사각형 또는 직사각형 단면, 특수 및 사용자정의 강 쉐이프
재료: 동, 황동, 청동, 알루미늄, 스테인리스, 탄소강(기타 금속 요구 사항)
말기, 꼬기, 스풀싸기.
3) 두 번째 압연 및 인장 단위
8평방 피트의 제조 가능한 부분 음..
생산: 슬래브, 둥근 선, 사각형 또는 직사각형 단면 선, 특수 및 사용자정의 강 쉐이프
두께 0.03mm부터 시작
열처리 및 열표면처리
재료: 동, 황동, 청동, 알루미늄, 스테인리스강, 탄소강(고객의 요구에 따라 기타 금속 제공 가능)
포장: 말기, 막대기, 꼬기, 말기
4) 권재절단장치(종단기)
강철 롤, 강철 벨트, 편평한 강철 및 강철 벨트
두께 0.03mm부터 시작
재료: 동, 황동, 청동, 스테인레스스틸(기타 금속 요구사항)
5) 전기도금처리장치
둥근 선, 사각형 선, 특수 강 쉐이프, 슬래브, 스트랩된 토량 대 토량 도금
최소 두께 0.05mm
재질: 구리, 황동, 청동, 탄소강(기타 금속 요구 사항)
치료도 계약대로 한다
Tecnoitalia Prodotti Industriali, dal 2008, fornisce materie prime semilavorate in metallo, con servizi di consulenza e di co-design. Specializzati in diversi ambiti industriali, abbiamo sviluppato negli anni servizi più completi per soddisfare appieno le esigenze dei nostri clienti. Siamo in grado di collaborare con i clienti per nuovi prodotti e nuovi progetti portando la nostra pluriennale esperienza personale ed aziendale
In differenti e specializzate unità produttive dislocate sul territorio Italiano, produciamo fili tondi, fili quadri, profili speciali, piattine, barre, nastri, coils, e trattamenti galvanici.
1) Unità di Trafileria
Produzione di: Filo trafilato, Trattamenti termici, Stagnatura a caldo
Diametri producibili da 0,08 mm (è possibile produrre diametri inferiori su richiesta)
Materiali: rame, ottone o bronzo (altri metalli su richiesta)
Confezioni in coil, matasse, bobine
2) Prima unità di Laminazione
Sezioni producibili fino a 10 mmq
Produzione di: Piattine, ribbons, fili a sezione quadra o rettangolare, profili speciali e a disegno
Materiali: rame, ottone, bronzo, alluminio, acciaio inossidabile, acciaio al carbonio (altri metalli su richiesta)
Confezioni in coil, matasse, bobine.
3) Seconda unità di Laminazione e Trafileria
Sezioni producibili da 8 mmq
Produzione di: Piattine, fili tondi, fili a sezione quadra o rettangolare, profili speciali e a disegno
Spessori sottili a partire da 0,03 millimetri
Trattamenti termici e trattamenti superficiali a caldo
Materiali: rame, ottone, bronzo, alluminio, acciaio inossidabile, acciaio al carbonio (altri metalli su richiesta del cliente)
Confezioni: in coils, barre, matasse, bobine
4) Unità di taglio coils (slitters)
Coils, nastri, piattine e bandelle
Spessori sottili a partire da 0,03 millimetri
Materiali: rame, ottone, bronzo, acciaio inossidabile (altri metalli su richiesta)
5) Unità per Trattamenti galvanici
Trattamenti galvanici reel-to-reel su fili tondi, fili quadri, profili speciali, piattine, nastri
Spessore minimo 0,05 millimetri
Materiali: rame, ottone, bronzo, acciaio al carbonio (altri metalli su richiesta)
Si eseguono trattamenti anche in conto lavorazione
- 금속 막대 | 금속반지
금속 막대 - 제조업체, 딜러, 공급업체
금속 막대 관련 검색을 할 시간이 없으십니까? 특별 서비스 양식을 이용하십시오.
IndustryStock의 직원들이 귀하를 위한 최적의 금속 막대 관련 제조업체, 판매업체 또는 서비스업체 등을 찾아서 귀하가 메일로 요청한 내용을 전달합니다.
당신은 사업상 금속 막대 을(를) 찾고 계십니까?
금속 막대로의 비즈니스 여행을 생각하고 계십니까? IndustryStock의 제품과 서비스 검색은 금속 막대에 대한 관련 검색결과를 제공합니다. 금속 막대 이외에도 기타 다른 제품과 서비스를 검색하실 수 있습니다. 금속 막대에 대한 등록된 제조업체와 배급업체의 모든 담당자 정보는 무료로 제공됩니다.
이 페이지에 있는 정보를 어떻게 평가하십니까?
23 평가 92%