안전부속품  제조업체, 딜러, 공급업체

ABA BEUL 유한회사
1895년에 August Beul이 설립하여 현재까지 네 번째 소유주가 관리하고 있는 이 회사는 사우스 솔랜드 지역에 위치한 Attendorn에서 건축 기술, 연결 기술, 수처리 및 FlexGuss 캐스트 어셈블리를 포함한 네 개의 제품 라인에 대한 시장을 공급하고 있다. 재료는 황동, 포메탈, 스테인리스강으로 고품질의 제품을 가공한다: 표준에서 개별적인 하이테크 특수 부품까지.

FRIATEC AG is a specialist company for products made of non-corroding and wear-resistant materials. We develop innovative solutions for the global market in dialogue with our customers.
Innovations for more than 150 years
The company was founded in 1863 in Mannheim, Germany, as a brickyard and succeeded in developing its first pathbreaking innovation, chemical stoneware, in 1888. Numerous new developments followed. Among other things, the company started in the mid of the past century processing plastics and combined modern and traditional materials when producing chemical devices and facilities.
The following years were characterised by the expansion in the core business and the opening up of more and more new business segments. As Deutsche Steinzeug and later as Friedrichsfeld GmbH, the company, which has been operating under the name FRIATEC AG since 1993, continuously developed to become an internationally active, diversified company.
Spectrum of innovative solutions
As such, FRIATEC AG today offers a spectrum of innovative solutions for many industries, e.g. jointing technology for pipe systems, special pumps for aggressive, volatile or explosive media, but also ceramic components which are used in laboratory and electrical engineering but also in medical engineering. With its sophisticated solutions, FRIATEC AG is not only among the most well-known and well-established companies in the metropolitan region Rhine-Neckar but is also one of the global market leaders of its industry.
Partner of a powerful community
Since 2003, FRIATEC AG has been a member of the ALIAXIS group of companies with headquarters in Brussels, Belgium. ALIAXIS is the worldwide largest producer of plastic pipe systems for the construction industry, the industry and utilities.

Die Deutsche Vortex wurde am 1.4.1965 gegründet, um ein völlig neues Pumpenprinzip auf den Markt zu bringen. Durch das verwendete Antriebssystem - den patentierten Kugelmotor, bieten Vortex - Brauchwasser Umwälzpumpen entscheidende Vorteile.
Fortschrittliche Technik mit modernsten Fertigungseinrichtungen ermöglichen den höchsten technischen Standard.
Das zertifizierte Qualitätsmanagementsystem wurde 1997 eingeführt. Damit garantieren wir von der Produktentwicklung über die Wahl der Materialien bis hin zur Produktion und Logistik beste Qualität.
Produktionsstätte, Entwicklung, Verwaltung und Verkauf befinden sich in Ludwigsburg.
Im Bundesgebiet wird die Deutsche Vortex von der Werksvertretung Hermann Schmidt in Essen vertreten. Wir verstehen uns als Partner des Sanitär- und Heizungs-Fachgroßhandels und setzen auf den 3-stufigen Vertriebsweg. Das bedeutet, bei VORTEX wird nur produziert, und nur der Großhandel vertreibt unsere Produkte an das Fachhandwerk.
Die Auftragsabwicklung erfolgt über das Werk in Ludwigsburg. In Europa übernehmen lagerführende Handelsvertretungen den Verkauf.
Die Deutsche Vortex gehört seit dem 1.1.1999 zur GRUNDFOS-Unternehmensgruppe.
Seit 2014 ist die Deutsche Vortex IHK Ausbildungsbetrieb und wir unterstützen die nationalen und internationalen Berufswettbewerbe.

Roswel은 2009년부터 존재하는 국제 회사이며, 이후 다양한 커넥터 및 파이프 시스템을 가진 전문가로 발전했으며, 그 중 많은 (커넥터; 스레드 커넥터; 압축 커넥터 및 압축 부속품) 및 호스 (PE 폴리에틸렌, PA 폴리아미드, PU 폴리우레탄, PB 폴리부틸렌, PTFE, PE-RT 바닥 난방 호스, 다층)은 재고에서 직접 제공됩니다.

고객의 요구에 귀를 기울이면, 범위가 점점 더 넓어지고 지식이 점점 더 커지고 있습니다.
Roswel은 단지 부속품과 파이프 시스템이 아니다. 또한 로젤 바이오히트에 와서 지속가능한 난방 솔루션과 펌프, 밸브 및 다양한 안전 부속품과 같은 펠릿 보일러의 안전한 운영에 필요한 모든 것을 찾을 수 있습니다.

Manufacturing products that satisfy even the highest customer requirements has been the source of Hawle Armaturen GmbH's motivation for over 40 years now.
Production:
Duktil Guss Fürstenwalde the company's in-house foundry, is where high-quality unfinished castings are manufactured. The cast material is then processed in Freilassing using the latest CNC production systems. Following an aggressive bout of abrasive blasting, the EWS coating - an epoxy powder coating manufactured using a fluidised bed sintering process - is melted onto the heated casting surface. The use of industrial robots during this ensures an even layer thickness (at least 250 µm*). Hawle even produces its own elastomer/plastic components required for the final assembly process. Before shipping, all products are subjected to a rigorous final inspection procedure.