화재 방지 테스트  제조업체, 딜러, 공급업체

Master Clean Dienstleistung
unsere Dienstleistung & Schulung für Ihren Betrieb
SCC & BBS – geschultes Personal
Arbeitssicherheit durch vorbeugenden Brandschutz

• Brandschutz nach ArbSchG §10

Brandschutzhelfer-Ausbildungnach DGUV 205 – 023
Brandschutzordnung A – C Erstellen / Prüfen nach DGUV 205 – 001
Feuerwehr / Flucht – und Rettungsplan Prüfen / Erstellen
Kennzeichungen der Rettungswege und Prüfen
nach DIN ISO23601-ASR A2.3 DIN 14095 DIN14096
Brandschutzüberprüfung ( Brandschau ) nach GUV-I 560
jährliche Brandschutzunterweisung nach DGUV 4 – 1
 E-Check nach DGUV-A3 nach VDE-0701-0702
Prüfen von allen ortsveränderlichen E-Geräten
(E-Check ist eine Vorsorgemaßnahme im Bezug des Brandschutzes in Ihrem Betrieb)
 Prüfen von Fenster ,Türen und Toren nach DGUV 208 – 022 ASR 1.7
DIN-18650 DIN 12445
Erstellen von Gefährdungsbeurteilung gem. ArbSchG § 5 und 6
für Ihren Betrieb (ASR-V 3 TRGS 400 und div. andere Vorschriften )
Sachkunde Prüfer für Leitern & Tritte nach DGUV 208-016
Sachkunde für Leichtflüssigkeitsabscheider Prüfung
nach EN 858 und DIN 1999-100
*= Wir führen auch jährliche Unterweisung & Inhouse – Schulung durch mit Ausbildungtechnik wie Beamer, Beamerleinwand, Flipchart &Übungslöschgerät HEIMI-1
Reinigung von Tankstellen – Industrie – Gewerbe – Lagereinrichtungen – Gebäuden
Wohnhausdächer , Fassaden , Ober – Unter & Lichtkuppendach – Reinigung
Zapfsäulen – Waschstraßen – Fahrbahnreinigung
Shopfassaden – Reinigung nach WHG – Richtlinen
Wir sind ein WHG – Fachbetrieb – Reinigung
Handel mit biologischen Spezial-Reiniger für Tankstellen, Gewerbe, IndustrieFür die Reinigung von Zapfsäulen – LAU-Anlagen , Maschienen, usw..
Wir führen diese Arbeiten & Schulung im gesamten Bundesgebiet durch.
Marcus Kazmierowski
Henrichsstraße 2 D - 47669 Wachtendonk
Tel : +49 - 02836 - 9111 990 Fax : +49 - 02836 - 9111 991
Mobil: +49 - 0152 - 5370 4827
E-mail : [email protected] HP : www.master-clean-dl.de

T&B electronic is an approved manufacturer of spark extinguishing systems. The company was established in 1984 by Manfred Tolle and Dieter Buro in the town of Alfeld located in the south of the German federal state of Lower Saxony. Since its establishment, more than 30,000 T&B systems have been sold worldwide. The company today has representations on four continents. The company is headed by managing partner Thomas Warnecke, a graduate physicist. With the ongoing further development of our range of products we continue to set new standards and today are among the market leaders in Europe for technical fire safety installations with spark extinguishing systems.

Partner and pilot of the clients on the world market
The worldwide estimated seal of quality "Made in Germany" owes its reputation to material testing that has essentially been influenced by the Materials Testing Office NRW in Germany. "We test, surveil and certify" is the service summary of the MPA NRW.
Material testing - not only a technical service
The MPA NRW was founded in 1947 in Dortmund and operates as a centre for testing, surveillance and certification for over 15,000 clients. The outpost in Erwitte has been operated as a fire testing centre since 1980. At the beginning of 1995 the MPA NRW became a state company due to the decree of the Department of Trade and Industry NRW. This is a commercially run, public company with the aim of cost coverage. Its services have therefore been directed more strongly towards client requests. Independence and objectivity remain to be the trademark of the state company when conducting mostly safety-relevant tests.
Harmonisation of the European standards
The MPA NRW does not understand material testing as a technical service only. The client can address himself to his person of contact in the testing laboratories at any time - for instance if he has questions concerning the harmonisation of European standards and their consequences for his products. Here the experts of the MPA NRW are a partner and pilot and are really at home with the subject: they played an active part in the unification of the European standards.
All testing sectors have been accredited resp. acknowledged by significant public and private bodies. The participation in many national and international standardization bodies and expert panels proves the high professional competence of the MPA NRW.
Today, the trade in goods and goods traffic in the inner-European market and also in international markets is no longer imaginable without the certificate of conformity - whether required by law or used voluntarily for a better market potential. In many cases it is compulsory to engage an independent testing and surveillance centre in order to obtain the certificates of conformity. Here is one of the main tasks of the state company. It helps small and medium-sized companies and industry to obtain the certificates of conformity without which they may not place their products on the European or international market.

Die KLW Ingenieure GmbH – Expertise for over 70 years
The origin of KLW Engineers GmbH can be seen in the consulting engineers office Professor Dr. Dienst found in 1936. The listing and testing of static calculations has always been one of the offices core competencies. The holistic view of our work and the thereof resulting concern for the service of others in different departments lead to a partner-like contact with our counterparts, which is still one of our qualities.
Our office is characterised by the constant development of eligible colleagues towards managerial functions. Thus, the maintenance and continuous expansion of our experience is ensured. This development is displayed with the change of the firms names: Engineering office Dienst und Richter; Dienst, Richter und Glatthaar; Richter, Glatthaar und Kraus; Glatthaar, Kraus und Lenz and eventually Kraus, Lenz, Wolber. Our office operates as a limited liability company (GmbH) under the respective name of KLW Ingenieure GmbH since 1999.

Ihr Experte für Gebäudetechnik, Hausmeisterserivce, Gebäudereinigung, Grünpflege, Winterdienst uvm.