31 보정기 관련 회사 ✓ 6의 B2B 제조업체, 판매업체& 공급업체 ✓ 신속하게 내용 및 가격 정보를 검색해주는 특별 서비스 ✓
- 보정기 | 칼리브레이터 | 보정
- 보정기 | 교정 | 보정
- 보정기 | 칼리브레이터 | 교정
- 보정기 | 교정 | 보정
- 보정기
- 보정기
- 보정기 | 보정
- 보정기 | 교정 | 칼리브레이터
당사 소개
내용보기 HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 보정기 | 보정
- 보정기 | 구경 측정기 | 칼리브레이터
- 보정기 | 보정
- 보정기 | 칼리브레이터 | 보정
- 보정기 | 교정 | 보정
- 보정기 | 칼리브레이터 | 보정
- 보정기 | 교정 | 칼리브레이터
- 보정기
- 보정기 | 보정
- 보정기 | 교정 | 칼리브레이터
66265 Heusweiler, 독일
TEMEKA Testen Messen und Kalibrieren von Prüf-und Meßmitteln GmbH
제조업체 ✓ 딜러 ✓ 공급업체 ✓ 서비스업체 ✓ 회사 프로필 문의하기
- 보정기 | 교정 | 보정
- 보정기 | 보정
- 보정기 | 공장 보정 | 보정
- 보정기 | 교정 | 칼리브레이터
- 보정기
- 보정기 | 교정
- 보정기 | 교정
- 보정기 | 교정 | 칼리브레이터
- 보정기 | 교정 | 칼리브레이터
- 보정기 | 교정 | 보정
당사 소개
Wir sind Ihr führendes Dienstleistungsunternehmen für Qualitätssicherung und Experten in den Bereichen Kalibrierung, Prüfmittelmanagement, Qualifizierung und Validierung. Mehr Service, mehr Sicherheit für Ihr Unternehmen.
보정기 - 제조업체, 딜러, 공급업체

보정기 관련 특별 서비스 양식을 작성하십시오.
IndustryStock의 직원들이 귀하를 위한 최적의 보정기 관련 제조업체, 판매업체 또는 서비스업체 등을 찾아서 귀하가 메일로 요청한 내용을 전달합니다.
당신은 사업상 보정기 을(를) 찾고 계십니까?
보정기로의 비즈니스 여행을 생각하고 계십니까? IndustryStock의 제품과 서비스 검색은 보정기에 대한 관련 검색결과를 제공합니다. 보정기 이외에도 기타 다른 제품과 서비스를 검색하실 수 있습니다. 보정기에 대한 등록된 제조업체와 배급업체의 모든 담당자 정보는 무료로 제공됩니다.
이 페이지에 있는 정보를 어떻게 평가하십니까?
29 평가 100%