10 테스트 인증서 관련 회사 ✓ 2의 B2B 제조업체, 판매업체& 공급업체 ✓ 신속하게 내용 및 가격 정보를 검색해주는 특별 서비스 ✓
- 테스트 인증서
- 테스트 인증서
- 테스트 인증서
- 테스트 인증서 | 감사 회사
당사 소개
내용보기 HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.
- 테스트 인증서
- 테스트 인증서
- 테스트 인증서
- 테스트 인증서
당사 소개
내용보기 시데온 공학의 에너지 활용요인
미래 교통의 버팀목인 철도는 특별한 기술적 도전에 직면해 있습니다. 이를 위해서는 개념부터 설계부터 승인까지 모든 관점을 알고 있는 숙련된 전문가가 필요합니다.
우리의 경험에서 얻은 이득을 우리가 함께 기차를 출발시키자.
우리의 핵심 경쟁력
-열차 운행 유지 자문
-역학적 설계 복잡성
-전력 제어 및 소프트웨어 유행을 선도하는 기술
-현장 엔지니어링에 필요한 역량
미래 교통의 버팀목인 철도는 특별한 기술적 도전에 직면해 있습니다. 이를 위해서는 개념부터 설계부터 승인까지 모든 관점을 알고 있는 숙련된 전문가가 필요합니다.
우리의 경험에서 얻은 이득을 우리가 함께 기차를 출발시키자.
우리의 핵심 경쟁력
-열차 운행 유지 자문
-역학적 설계 복잡성
-전력 제어 및 소프트웨어 유행을 선도하는 기술
-현장 엔지니어링에 필요한 역량
테스트 인증서 - 제조업체, 딜러, 공급업체
짧은 시간 내에 더 많은 내용 및 가격 관련 정보를 확인하려면 검색 결과 페이지에서 특별 서비스 양식을 이용하십시오.
IndustryStock의 전담팀 귀하의 요청 사항에 맞는 최적의 테스트 인증서 관련 제조업체, 판매업체 또는 서비스업체 등을 보다 신속하게 찾아 귀하가 작성한 메일을 전달합니다.
당신은 사업상 테스트 인증서 을(를) 찾고 계십니까?
테스트 인증서로의 비즈니스 여행을 생각하고 계십니까? IndustryStock의 제품과 서비스 검색은 테스트 인증서에 대한 관련 검색결과를 제공합니다. 테스트 인증서 이외에도 기타 다른 제품과 서비스를 검색하실 수 있습니다. 테스트 인증서에 대한 등록된 제조업체와 배급업체의 모든 담당자 정보는 무료로 제공됩니다.
이 페이지에 있는 정보를 어떻게 평가하십니까?
9 평가 100%