코팅 측정  제조업체, 딜러, 공급업체

emco 측정 기술.
emco Elektronische 식당 - 깨물어 Steuerungstechnik GmbH는, 종이의 테스트 숙녀 측정 기술의 장치를 개발하고 있습니다. 벌써 20 년이므로 그것은 프로세스 관련 종이 테스트의 글로벌 혁신 선두 주자입니다.
emco은 costumer 불만과 현상의 이해에 대한 전세계의 종이 제조 업체와 집중적인 협력을하고 있습니다. 그렇기 때문에 종이의 일곱 프로세스 관련 특성들이 개발되었습니다. 모든 특성 emco 몇 가지 실용적인 측정 기술을 개발했습니다 때문이다.
용지 특성 - - 최적의 과정이 기간 동안 emco 그 결과를 측정 사이의 관계를 결정하는 방법을 알고 있어요.
multispectral 카메라 시스템 "파피루스"를 통해 이러한 연결은 2012에서 프로세스 자동화에 사용됩니다.

BAQ GmbH is operating in the field of material testing since 1992. The product range covers stationary and portable hardness testers (Vickers, Rockwell, Brinell, Shore, impact hardness and ultrasonic contact impedance (UCI) method) as well as devices for testing layer thickness, abrasion resistance, scratching resistance and coating adhesion strength. These devices are used in all areas of material testing, e.g. inspection of incoming goods, production, research and development. More than 25 years of experience and continuous cooperation with the Fraunhofer Institute for Surface Engineering and Thin Films and others as well as in-house development and production in Germany guarantee good quality and optimal service. BAQ also offers optimized solutions for special requirements.

The ColorLite GmbH was founded in 2003 as a start-up company, applying the results of years of research work in the field of colour metrology gained at the University of Applied Sciences, Hanover. Our products have been based on the technological advantages gained from these beginnings. Our newest product, the ColorLite sph900 carries on with this tradition of innovation, making it by far the most advanced mobile spectrophotometer on the market. To maintain this advantage ColorLite spends an over proportional amount of its resources in research and development. Research projects in cooperation with Europe’s largest plastic research institute SKZ, Wuerzburg help us to develop the products that future industry needs.

IB-Lenhardt AG and its experienced consultants support the product development of radio and telecommunication devices. Accredited testing to the highest standards for automotive, industrial automation and consumer products. Use the full service from consulting to testing to worldwide certification for a successful market entry.

우리는 정밀 기계 공학과 계량 전문가이다. 개발 서비스, 전용 계량 테스트 설비 건설, 계약 계량 및 HSC 대리 공정 우리는 플라스틱과 탄성체 특성을 분석하는 LNP ® 나노 터치, 마이크로 프레스 헤드를 중심으로 하는 저명한 작업 솔루션이자 액세서리이다.

We at Resonic are experts for inertia measurement. We construct measurement systems and offer measurement services for clients worldwide. Our goal is to make measuring the full moment of inertia as simple, as fast and as accurate as possible. Robert Klöpper, founder, technical director and mastermind behind Resonic, developed the unique Resonic technology at Tokyo Institute of Technology in 2011. Since then, renowned companies around the world have used Resonic instruments to measure cars, motorbikes, satellites, motors, floating constructions and many more.
SIMPLE
We deliver turn-key systems including hardware, software and the entire operating components — even the matching screwdrivers. With Resonic systems you can measure a broad range of test objects — from tennis racket to brake discs, from motors to verhicle doors, from entire racing cars to huge satellites. For all customers only needing to measure moment of inertia from time to time, we offer our measurement service. Our experienced Resonic engineers will travel with our measurement test equipment to you your site — wherever you are!
FAST
Our Resonic machines measure the full moment of inertia. They determine mass, center of gravity and full moment of inertia in just one go. No need to tilt or reposition your test objects. The risk free procedure delivers testing results within minutes. You can transform the results with one click into the coordinate system of your test object. 3 D measurement or photogrammetry in combination with the Resonic software make this possible. The best thing: You can operate Resonic instruments without special skills. In only one day, we can train you and your colleagues to operate all Resonic equipment on your own.
ACCURATE
Wrong input is a major source for measurement faults. The Resonic technology reduces human input, therefore human error, to a minimum — thus increasing measurement accuracy. In addition, our software will guide you step by step through the measurement process. Constant feedback on the results gives you the chance to correct measurement errors immediately. We test the accuracies of our machines with referential measurement and make these test results available to our customers.
 

Die Surflay Nanotec GmbH wurde im Oktober 2008 in Berlin-Adlershof (Deutschland) von Dr. habil Lars Dähne gegründet. Das technologieorientierte Unternehmen hat sich auf die Beschichtung von Oberflächen zur Funktionalisierung sowohl kolloidaler als auch großflächiger Materialien spezialisiert.
Die Schlüsseltechnologie der Surflay Nanotec GmbH ist die Layer-by-Layer (LbL)-Technologie mit geladenen Polymeren (Polyelektrolyte). Damit werden sowohl makroskopische als auch kolloidale Oberflächen im Nanomaßstab funktionalisiert.
Die Kombination von physiko-chemischen Funktionen und biologischen Eigenschaften in voneinander getrennten, nanometerdicken Schichten gestattet einzigartige Oberflächenmodifizierungen ohne großen Aufwand.
Anwendungsgebiete sind neuartige Trennmaterialien, Wirkstoffverkapselungen, Enzymimmobilisierung sowie sensorische oder diagnostische Partikel. Eigene Patente und Know-How in Verbindung mit einlizenzierten Patenten bilden die Basis für die Entwicklung innovativer und marktorientierter Lösungen.