Externe draad  Fabrikanten, distributeurs en leveranciers

Uw expert voor schroefelementen en werveltechniek
Burgsmüller is opgericht in 1876 en is sindsdien een expert op het gebied van professionele schroefdraadtechnologie en de productie van slijtdelen in de kunststofverwerking. Wij bieden u de nodige expertise om de juiste oplossing op maat voor u te vinden. Vandaag de dag staan we wereldwijd voor u klaar en bieden we u uitstekende diensten en onderdelen, variërend van draadspindels tot draadmoeren.

From balustrade in-fills and fall protection to complex zoolutions: CARL
STAHL ARCHITECTURE is a specialist for almost any application involving
stainless steel cables and mesh. Ever since 1880, CARL STAHL has been
up among the leaders when it comes to ropes and cables – originally in
the form of natural fibre ropes for agriculture and today as a supplier
of steel cables and lifting equipment for very heavy loads. CARL STAHL’s
“ARCHITECTURE” division was established in the nineties under the
umbrella of its tradition-steeped parent.
From consulting and planning through structural calculations to
manufacturing and installation, CARL STAHL ARCHITECTURE provides
end-to-end services to customers seeking to realise creative ideas with
the help of ropes and cables, meshes and stainless steel system
components – no matter where they are in the world.

Welter Werkzeugtechnik GmbH is al tientallen jaren een betrouwbare partner voor stegdraaibedrijven als het gaat om automatisch schroefdraadfrezen. Wij produceren automatische draadfrezen in KHSS-E en volhardmetaal voor de meest gangbare automatische draaibanken zoals Gildemeister, Index, Schütte, Tornos, Traub etc.

We bieden een naslijpdienst voor onze gereedschappen en voor gereedschappen van andere fabrikanten.

We slijpen ook uitwendige schroefdraad in staal en hardmetaal op contractbasis.

Welter Werkzeugtechnik GmbH levert frezen voor verschillende takken van industrie, zoals toeleveranciers voor de automobielindustrie, de sanitaire sector en fabrikanten van chirurgische apparatuur, om er maar een paar te noemen.

Tot onze tevreden klanten behoren zowel wereldberoemde bedrijven als kleine en middelgrote ondernemingen, omdat we bekend staan om ons vermogen om klantverzoeken voor individuele metaalbewerkingseisen snel en nauwkeurig te realiseren.

WELCOME TO BAIER & MICHELS
The globally focused b&m Group, with its headquarters in Ober-Ramstadt in southern Hesse, has built up a strong position as an innovative partner to the manufacturing industry in the field of cold forming. The basis for this is provided by high-quality fasteners as well as closing and sealing systems from our own development and production. Our customers include OEMs and suppliers from the automotive, electrical and medical technology sectors.
baier & michels reliably supports them not only as a producer, but also as a problem solver: Besides technical application advice and connection tests in our laboratories, we also provide specialist training and a unique standardization tool that industrial companies can use to massively reduce the variety of their C-parts. Our 500 employees are our most valuable asset. With their know-how and experience, we are always able to meet the highest demands of our customers. You can count on it!
We support you as a trusted partner in all facets of cold forming:

• Innovative b&m-products
• Independent application engineering
• Technical support and consulting
• Training, digital or directly on-site
• Online Portal for standardization

Dresden - cradle of the camera industryDresden - one of the birth places of the camera industry. PENTACON has a long history, starting in the early 20th century.
The
first time the company did business by the name PENTACON was in 1964
when several companies in the area in and around Dresden were unified.
The name comes from the Pentaprism of modern SLR cameras and the early brand name Contax, which was the predecessor before world war II. After the company merger the state-owned PENTACON became the biggest employer in the region and in 1980 around 9,000 people worked for PENTACON.Part of the Jos. Schneider groupIn 1990, parts of the company trust were sold to the Jos. Schneider group
in Bad Kreuznach and from then on is subsidiary of one of the leading
enterprises in the fields of optics. In 1997, the present PENTACON GmbH
has beend founded and employs ca. 125 people.From the medium to the large scale productionWith
decades of experience in precision engineering and the processing of
metal and plastics, PENTACON continously invests in production
technology. Starting with turret lathes and small size grinding
machines, we step-by-step enhanced our capabilities. New technologies
had been tested and so, change towards a large scale production has been
completed.
Today, PENTACON uses
various Swiss turning machines, chained puncture milling machines for
extruded parts and INDEX machines for large batch optical parts.High quality plastic injection moldingAlso
the plastic injection molding had been an integral part with PENTACON
for several decades. After 1997, we started with standard production on
machines with clam forces of 50-150t but quickly enhanced our
activities in this field. Using the experience in manufacturing
cameras, PENTACON specialised in coating of inserted parts. Optical and
medical plastic products, which require clean room production are part
of our portfolio just like two-shot parts are in large scale batch
production.Camera manufacturing 'Made in Germany'The
camera manufacturing is still part of PENTACON. Here, we have
specialised in developing and manufacturing system solutions for
industrial partners and concentrate on digital scan cameras with high
resolutions.
Also the developing of
industrial image processing systems offered new possibilities to
monitor the own production as well as external production to secure
high quality requirements and downsize costs. Today we are a respeced
partner for the inspection of synchronizing rings, the inspection of
surfaces for scratches, blowholes and fissures as well as the
inspection of boreholes and threads.DAkks accredited measuring and calibration laboratoryTo
support the quality control, PENTACON installed an own measuring
laboratory. By the end of the 1990s, we applied for an accreditation at
the German Accreditation Body for gauge blocks. Since then we are
undergoing annual revisions for the accreditation and earn the required
certificates. We continously enhance our service portfolio and also
counsel external partners as a measurands calibrator.