Laagdiktemeter  Fabrikanten, distributeurs en leveranciers

Dalian Haifeng Instrument Development Co., Ltd. is located in the high-tech park in the coastal city of Dalian, known as the Pearl of the Orient. The company has been dedicated to the development of ultrasonic flowmeters, ultrasonic water meters and ultrasonics since its establishment. The independent research and development, design, production and sales of ultrasonic fields such as liquid level gauges, ultrasonic thickness gauges, and ultrasonic flaw detectors have obtained a number of national patents. The company has a registered capital of 10.2 million yuan and a production plant of 150 million square meters. It has a Beijing branch, a Shanghai office, a Hebei office, a Xinjiang office, and more than 100 employees, 50% of which. Employees have undergraduate and bachelor degree or above. Professional software, hardware development engineer, product design engineerare, hardware development engineer, product design engineer.

Incorporated in 1993, Electronet has emerged a key player in the Indian instrumentation and automation business. Our goal is to establish ourselves as a key player in the global arena, especially process control instruments, which cater to power plants (nuclear, thermal, wind, hydro & gas based), fertilizer plants, refineries, chemical, petro‐chemical, cement, pulp & paper, sugar, pharmaceuticals, gas, water & water treatment plants, atomic research stations, and so on

FRT is een van 's werelds toonaangevende leveranciers van 3D metrologie voor R&D en massaproductie. De FRT MicroProf® is gevestigd in de halfgeleider front-end, geavanceerde verpakking, MEMS, VCSEL, automobiel, machinebouw, optiek, LED en medische markten.
Een derde-generatie ultra-stabiel platform en eigen software zijn het resultaat van meer dan 25 jaar ervaring. Het FRT multisensorconcept en de hybride meettechnologie ondersteunen productielijnen wereldwijd. De toepassingen zijn contactloos en volledig automatisch. Meetparameters zijn topografie, staphoogte, ruwheid, TTV, kromming, vervorming, spanning, laag- en stapeldikte, overlay en CD - en nog veel meer.
Verschillende meetmethodes kunnen gecombineerd worden met punt-, lijn- en oppervlaktesensoren, evenals laagdiktesensoren en atoomkrachtmicroscopen in één meetapparaat en recept.
De meermaals bekroonde meetsystemen leveren (ook volautomatisch) informatie over topografie, structuur, staphoogte, ruwheid, slijtage, laagdikte en vele andere parameters, contactloos en niet-destructief.
Afhankelijk van de toepassing kunnen verschillende meetmethoden met punt-, lijn-, oppervlakte- en laagdikte-sensoren alsmede atoomkrachtmicroscopie in één meetapparaat worden gecombineerd - de meetbereiken kunnen zich uitstrekken van het meter- tot het sub-nanometerbereik.

Knowing paper better !
Emco Elektronische Meß- und Steuerungstechnik GmbH, develops devices of the test und measuring technology of paper. Since almost 20 years it is the global innovation leader of process-relevant paper testing.
emco has an intensive cooperation with the paper manufacturers all over the world on the understanding of costumer complaints and phenomena. Because of that the seven process-relevant characteristics of paper have been developed. For every characteristic emco has developed several practical measurement technologies.
During this time emco got the know how to determine the relation between measuring result - paper characteristic - optimal process.
With the multispectral camera system "Papyrus" these connections will be available for the process automation at 2012.Knowing paper better !

BAQ GmbH is operating in the field of material testing since 1992. The product range covers stationary and portable hardness testers (Vickers, Rockwell, Brinell, Shore, impact hardness and ultrasonic contact impedance (UCI) method) as well as devices for testing layer thickness, abrasion resistance, scratching resistance and coating adhesion strength. These devices are used in all areas of material testing, e.g. inspection of incoming goods, production, research and development. More than 25 years of experience and continuous cooperation with the Fraunhofer Institute for Surface Engineering and Thin Films and others as well as in-house development and production in Germany guarantee good quality and optimal service. BAQ also offers optimized solutions for special requirements.

Dalian Taosonics Instrument Co., Ltd. has been in the ultrasonic flow measurement for over 20 years. Headquartered in Dalian, China, Taosonics was built on creative opportunity, entrepreneurial spirit and team camaraderie, designs and manufactures a full line of high accurated ultrasonic flow meters, ultrasonic water meters and ultrasonic heat meters. An innovator in ultrasonic flow measurement and control products, Dalian Taosonics Instrument serves water utilities, municipalities, commercial and industrial customers worldwide. Measuring water, oil, chemicals and other fluids. Taosonics products are well known for accuracy, long-lasting durability and for providing valuable and timely measurement data.

"MeasuringMade Easy". Under this motto, Helmut Fischer Global has been developingand manufacturing measurement instruments for industrial use and laboratoriesfor more than 65 years. As specialist with comprehensive expertise in the fieldof surface inspection, the company is one of the world's technology leaders. Fischer'sproduct offerings include instruments for coating thickness measurement, XRF materialanalysis as well as nanoindentation und scratch. Fischer instruments arerenowned for their quality in precision, simple handling or automated testingprocedures. Fischer is active in industries such as corrosion protection,automotive, electroplating, semiconductors, aerospace, medical technology andprecious metals. Fischer is headquartered in Sindelfingen, Germany, and has 21international subsidiaries as well as a worldwide dealer network.

Made in Germany
Automation Dr. Nix GmbH & Co. KG is a German manufacturer of portable devices for the non-destructive measurement of coating thickness on metal substrates. Our easy-to-use gauges are made in Germany, of high quality and in demand worldwide.
The company was founded 1968 and has its head office in Cologne: all its expertise under one roof. We understand what our customers need. We develop, design and manufacture the QNix® series gauges and test their quality.
We work daily on developing products that meet the needs of our customers and are easy to use. Our goal is to offer you optimal product-related service.
Manufacturing instead of mass-produced goods
All coating thickness gauges in the QNix® series are fully developed, produced and tested in house in our facility in Cologne. They are therefore "hand-made in Germany". We test every gauge extensively in our own calibration laboratory and provide a test certificate with it. Only then will it be sent to you. This high degree of production quality is demonstrated, in particular, by the longevity of our products.