Polijstinstallaties  Fabrikanten, distributeurs en leveranciers

Über uns sollten Sie wissen, dass unsere Wasserstrahlschneidanlagen, Laserschneidanlagen und Maschinen für das Entgraten und Schleifen komplexer Werkstücke für höchste Präzision stehen. gKteso wurde von Guido Kübler gegründet, hat seinen Sitz in Bobingen bei Augsburg setzt bei der Entwicklung und dem Bau seiner Laserschneidanlagen und Wasserstrahlschneidanlagen auf ein ausgeklügeltes Baukasten-System. Das gilt auch für die Maschinen zum Entgraten und Schleifen. Dietmar Kübler ergänzt den Entwicklungsingenieur als Leiter der Produktion und des Qualitätsmanagements.

PerformCoat is a leading supplier of high performance PVD and PeCVD coating equipment and technology. It supplies equipment and turnkey operations from entry-level to large-scale manufacturing. Thanks to its unprecedented application knowledge, PerformCoat provides all equipment with processes tailored to the customer’s needs. Its services include full local support beginning with technology selection through installation, training and production support.
PerformCoat also provides all peripheral equipment. We gladly demonstrate our new state of the art honing equipment PerformDrag, PerformBrush, and PerformMblast as well as our complete line of PerformClean, our latest solvent and water based cleaning machines.

Welcome at Sepotec
Innovative and modular machine designs, based on many years of experience and development in the range of Aviation, Energy, Medical and Automotive.
Through our continious development, which benefits from the constant evaluation of our practical experience, we can offer you machining solutions highly customized to your needs. We see ourselves as your solution partner for demanding engineering tasks in a interconnected field of machining processes.
Grinding, deburring and polishing machines for the surface treatment for a wide varity of parts:
1. Multi axis belt grinding machine
to grind and finish turbine blades from 50-500 mm length.
Ideal for the treatment of
Steam Turbines
Gas Turbines
Compressors
Aircraft Engines
2. Our grinding machine
panther 1.1 best suits where belt finishing of rotation parts at grain size up to 2000 is requested.
Parts like:
Crank Shafts
Cam Shafts
Gear Shafts
Piston Rods
Hardend Shafts
3. The Deburring Machines
panther 2 is designed to deburr parts like housings, gears, blisks and other parts with complex shapes.
It allows to create defined chamfers with hard tools (e.g. mills, diamond deburring tools, ...) and the finishing with soft tools (e.g. brushes) in one cycle.
4. The Polishing Machines
panther 3 is specially designed to high polish ceramics and titan.
With up to 6 CNC axes and a push rod tool we can grant a optimal seat of tool on all points, even with spheres and overlapping shapes.
Please contact us for further details.
5. Polishing Machines
Depending on the selected brushes, panther 3.1 ideally suites deburring and polishing of parts like:
Tapware
Automotive Trim
Metall Sheet Parts
Clock Components

BREUER is a powerfull mid-size company looking back on more that 80 years of history. Since 50 years we focus on surface processing of coils.
The company was found 1928 in Solingen, a city which is world famous for knives, blades and scissors and which has formed the quality attribute “Made in Solingen”. In the beginning Mr. F. Wilhelm Breuer was manufacturing machines for producing razor blades like stamping machines, decoiler and grinding machines. Due to the increasing surface demands a special machine to remove scale and annealing colors from hardening and tempering has been developed. This machine was working with rotating steel wire brushes and a rough polishing paste. The foundation was laid for the first buffing machine, and cold rolling industry took notice of it.
This type of machine was quite successful and the working width was increasing from 50 mm to 400 mm. From the 50ties on Breuer only concentrated on machines for surface treatment and the divison “razor blades” was sold to another company in Solingen. In 1954 Europe´s first beltgrinding machine for cold rolled strips was sold and from that time coil buffing machines and coil grinding machines were the key products for Breuer.
Today the scope of supply covers beltgrinding machines, polishing and buffing machines, brushing machines as well as degreasing machines for the cold rolling industry. We are ranking with the world leading manufacturers for these special machines. Over 200 machines and lines have been installed worldwide.

Since 1981 Widoberg is successfully working on the field of surface technology as a partner of the grinding and polishing industry.
Our main business are high velocity spray guns and reconditioned and new grinding and polishing machines.
These machines are supplied to producers of holloware, kitchen utensils, sanitary fittings, builders hardware and lamp parts as well as the automotive and gift industry worldwide.
The attempt to lower production costs has lead to the development of our patented high velocity spray guns.
Nowadays more than 30.000 guns are in use worldwide and almost all leading manufacturers of polishing machines equip their machines with our high velocity spray guns.
We also supply ultrasonic cleaning systems and special purpose machines which are designed individually to fit the requirements of the customers.

OUR MISSION:
We develop and produce innovative, eco-friendly, ergonomic and high-quality systems and facilities for paint using businesses. We represent optimal working safety and highest customer satisfaction, always with the claim to perfection
– worldwide!
OUR VISION:
Imagine a workplace that is eco- and health-friendly, free from emissions, ergonomic, adaptable to different people, and intuitively operable.
Imagine an equipment partner which reacts immediately to your individual wishes and demands – and puts them into operation.
Independent from external shareholders, the customer’s satisfaction is our central goal. With constant investment into innovation, coupled with an accessible cost structure, we make the work place of the future already possible, today.
Our aspiration is to satisfy the customer as the leading supplier of eco-friendly, ergonomic and high-quality paint equipment – in Germany, Europe and the whole world. True to our motto: Be Better, Be Smart, B-TEC!

We are German manufacturer of numerically controlled CNC milling machines, portal millingmachines, plasma cutting machines and engraving machines.
Under the managementof company founder Frank Hylewicz, since 2005 more than 8,000 machines have leftour production site in Geldern on the left banks of the lower Rhine.
With 30resellers throughout the world and a unique customer support concept, CNC-STEPhas made a name for itself in terms of quality and service in the internationalmarket.
The widerange of applications of our machines made in Germany makes them so popular,both in the industrial as well as the hobby sector: 2D milling / 3D milling,engraving, dosing, gluing, 3D scanning, cutting, welding, plasma cutting, waterjet cutting, eroding, ultrasonic welding, etc.
The secretof our success: Customer proximity
Due tosteady contact with our customers, we can realize suggestions and new ideasregularly into new innovations on our machines and thus achieve the bestpossible product.
We would bepleased to welcome you to a live demonstration of one of our CNC machines inour house.

Biegemaschinen für thermoplastische Kunststoffe.