Ontsmettingssystemen  Fabrikanten, distributeurs en leveranciers

Since 1979, we produce equipments for;
OCCUPATIONAL HEALTH AND SAFETY
FIRST AID & CIVIL DEFENSE
FIRE & CBRN & PERSONAL PROTECTION.
Our headquarters and factory are located in Ankara. With our network of distributors spread all over the country and worldwide
we distribute our best and high quality service to customers in the shortest time.
Our company has TS EN ISO 9001 Quality Certificate. All our products are certified according to international standards.
What We Do at our Emergency Shower Division
We provide variety of special services you may need.
Engineering Consultation
IST provides complete information on the design, use, supply and care of emergency showers and eye/face wash fountains, safety storage and plunger cans, spill containment systems, decontamination systems and airline breathing systems. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems.
Special Engineering Solutions
Each shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST is fully equipped to offer and produce the special designed systems according to your needs.
Adjusting Water Temperature
Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face wash fountains will work properly under all circumstances. Our experts will work in coordination with your design or expert team.
Pre-Sales Solid Modelling and Technical Drawing
We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three dimensional detailed technical drawings are available for all our products.
After-Sales Support
Our expert technicians can evaluate your existing emergency shower and eye/face wash fountain systems to ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower.
All our products are guaranteed against production and workmanship defects for a period of 24 months.
What We Do at our Protective Clothings Division
We provide variety of special services you may need.
Consultation
IST provides complete information on the design, use, supply and care of industrial heat and flame protective workwear / underwear / balaclavas, electric arc protective clothings, fireman suits, aluminized fire proximity/entry suits, air cooled kiln entry clothings, functional and thermal underwears/t-shirts. Our experienced team will provide you the best economical solution with customized size dimensions, preliminary study and technical drawings.
Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. We provide special protective clothing solutions suitable for work areas, that do not compromise protection while providing ease of movement.
Special Engineering Solutions
Each garment is designed for different purposes and has different certificates. A protective garment cannot substitute another. The most suitable and most appropriate solution must be determined according to the protection level and area of use. In IST® textile production workshop, fabrics are cut by using licensed cloth spreading software to combine the best designs with the best stitching properties with same pattern in all sizes and to prevent the possibility of encountering an error. IST® is fully equipped to offer and produce standard and special designed garments according to your needs.
Complementary Accessories Selection
Complementary elements of protective clothing are of great importance for full protection. You can easily choose and gather the most suitable complementary materials that can be specially used with the protective clothing you purchased such as; personal protective equipments like head, face, hand, respiratory, foot protectors, from our range. Our expert team will guide you in choosing your protective garment and choosing a complementary accessory with the most appropriate international standards for your working area.
Pre-Sales Support and Modelling
Before production, we design your protective clothing in our advanced technical drawing softwares according to your preferences and submit to your approval. Protective clothings that are purchased because of their high protection levels, but are unsuitable for the working facility may not provide adequate protection and may result in high costs for your company. Appropriate personal protective equipment should be determined as a result of risk analysis by experts. In this regard, our technical team will work in coordination with experts in your facility.
Standards and Certification
All our products are fully tested by notified bodies in Europe according to the relevant European standards and certified according to the relevant EN standards. In selection of protective clothings, labels inside the suit must be examined well, labels must be printed in accordance with European standards. The information on the label must be verified with certificates. In this regard, our expert technical team will provide consultation to you valuable customers.
After-Sales Support
Our company provides the necessary information, training and solutions to its customers on the maintenance, use and periodic controls of purchased products. Our company gives repair services for all standard and/or special design protective clothings that are damaged, or have worn parts. In this sense, it is aimed that the user can use the existing product for a long time instead of buying new product.
Our sales representatives can provide training on the use of the products. All of our products are warranted against production and workmanship defects for a period of 24 months.

Decontamination products, industrial decontamination, personal hygiene products, clean room products

Time and again we are asked what exactly it is that we do at PPS. When all is said and done, it is quite easy. We develop, manufacture and sell tools. Tools for the industrial cleaning trade. Whether in offices, industrial buildings, institutions such as hospitals or nursing homes, cleanrooms for the pharmaceutical, cosmetic or chemical industries or in production rooms in the semiconductor industry. Contamination must be removed and hygienic standards must be maintained.
Every day, well-trained experts ensure that this happens: the industrial cleaners.
We strive to provide our tradesmen with the most optimal tools available. In doing so, we always develop, conceptualise and manufacture our solutions ourselves and rely on our many years of experience, we also rely on studies and on the feedback provided by our customers. We always take the time to ask: How can an industrial cleaning employee perform his or her job more quickly, effectively and more easily in order to attain or exceed the desired results?
Our managing director is an industrial cleaning master craftsman himself and would never allow a product to "trickle through" if it wasn't able to meet the required standards in the daily, practical use and if it did not offer significant advantages.
We are a full-service provider for our clients. Innovative system technology, intelligent process development as well as high-tech textile quality are harmoniously interconnected with ecological aspects and close customer contact. PPS stands for manual cleaning equipment, and for manual cleaning technology for professional users. We are your partner for the manufacturing of cleanroom cleaning systems of all classifications, public and industrial buildings as well as hospitals. Our idea, our product world and our high demand for quality – stemming from our experience, expertise, an eye for details, forward thinking – they are all summarised under the term the Clino® way.

Wir sind ein junges ausstrebens Unternehmen mit Düsen Innovation für Brandschuzt, Klimaschutz und Gesubdheitsschutz.
Wir bieten eine revolutionäre Wassernebellöschanlage an mit dem größen Wirkprinzip für Brandbekämpfung und Schutz des Lebens und der Sachgüter.
Sprechen Sie mit uns und wir zeigen Ihnen Ihre individuelle Lösung!

Innovatieve technologische ontwikkeling en producten op maat van uw behoeften
De bedrijven IMAGINE Engineering GmbH en IMAGINESystems GmbH zijn gevestigd in Bergheim, in het verzorgingsgebied Keulen/Aken/Düsseldorf. Een creatieve werkomgeving van 400 m² biedt veel ruimte voor nieuwe ideeën, die worden uitgevoerd in het aangrenzende technologiecentrum van 600 m². Een zeer gemotiveerd, interdisciplinair team van 16 specialisten heeft vele jaren ervaring in het ontwerpen, ontwikkelen, bouwen en automatiseren van componenten en systemen.
IMAGINE Engineering GmbH is uw partner voor creatieve oplossingen, van idee tot prototype.
Onze bijzondere sterke punten liggen op het gebied van:

• Hygiënisch ontwerp en engineering voor voeding & farma
• Hygiënische processen voor productiesystemen, vul- en verpakkingsmachines
• Multifysische simulatie
• Elektrothermische afdichtingstechnologieën (inductielassen, contactwarmte)
• Automatiseringsdiensten voor industriële installaties, servotechnologie, robots
• Prototypebouw

IMAGINE Systems GmbH biedt componenten en speciale oplossingen op het gebied van reiniging, sterilisatie & desinfectie, producthandling en afdichting & aftopping. Als specialist op het gebied van hygiënische installatietechniek en hygiënische procestechnologie hebben we systeemcomponenten ontwikkeld en zijn we ook uw aanspreekpunt voor complete machines en systemen.
Onze productportfolio omvat

• Doseersystemen voor waterstofperoxide
• Verdamper voor het genereren van een gasvormig waterstofperoxide/luchtmengsel
• Meetsystemen voor het controleren van waterstofperoxideconcentraties
• Katalysatoren voor de gerichte ontleding van waterstofperoxide in de uitlaatlucht
• Sterilisatiesystemen voor sluitdoppen
• Reinigingssystemen voor verdampers van waterstofperoxide
• Sluitgereedschap voor het sluiten van verpakkingen in de voedingsmiddelen-, farmaceutische en cosmetische industrie
• Applicators met geïntegreerde inductiesystemen voor het sealen van doppen met sealfolie
• Sealgereedschap voor schutfolies (bijv. yoghurttub) en voor het sealen van lengtenaden van verpakkingen
• Testapparaten voor lektests van verzegelde naden en voor sterkteanalyses van naden
• Pick-and-place-systemen
• Grijpersystemen
• Vulinstallaties