Fan motorları  Üreticiler, Satıcılar, Teslimatçılar

The company Kurt Maier Motor-Press GmbH was established in 1979. Our expanding company has production centres in Germany and Southern Europe.
We sell and supply to our customers standard components for electric motors in frame size IEC 56 up to IEC 400, but also components made in accordance to our customer´s requirements.
Accessory parts are stator empty casings, endshields, flanges and terminal boxes of aluminium or cast-iron. Further ventilation fans, radialblowers, stator- and rotorpacks and accessories for the motor manufacturing.
Further products are forced ventilation units for permanent cooling of electric motors,  incremental Encoder as were  flameproof motors from Cemp, FPM (F&G), Elprom and RAEL.
The aim of our company´s policy is to meet the steadily increasing demands of technology and quality.
Among our customers are well-known manufacturers of:
•Electric motors and geared motors
•Pumps
•Fans, blowers and ventilation fans
•Drive engineering
•Armature rewinders and repair shops
•Wholesalers of components

For more than 59 years OJSC "Minsk Motor Plant" Holding Managing Company has been specializing in design and production of modern 3-,4-,6-cylinders diesel, gas-diesel, gas engines within the power range from 35 hp to 350 hp conforming to ecological standards EURO-0/1/2/3/4/5, Stage 3А/3B/4.
Our engines are supplied to 44 assembly lines; products are exported to more than 50 countries of Europe, Asia, Africa, North and Latin America.
These are the products manufactured by our Company:
1. 3-,4-,6- cylinders diesel engines for production of agricultural machinery (tractors, combines, sprayers), automobiles, buses, road-building machineries (truck lifts, excavators, moto graders, road rollers, sweepers, truck concrete mixers, concrete pumps), forestry harvesters (chippers, forwarders), industrial and dredge ships, off-road vehicles (marsh buggies, snowmobiles), mining machineries (diesel locomotive).
2. Industrial diesel engines for electric power generation sets, water sets, compressor sets, welding sets, drilling rigs, diesel pump stations and motorpumps.
3. Electric power generation sets of own production.
4. Mobile and stationary compressor sets of own production used for compressed air supplying, feeding of local pneumonetworks of industrial facilities, and for road and building works.

Üreticiler ve tedarikçilerBüyük motorHer türlü endüstriyel uygulama için uygundur-25 MW'ın altında, 13.8 kV. Menzel Elektromotoren GmbH orta büyüklükte bir elektrik üretim şirketidir.90 yıldan fazla deneyimBüyük elektrik motorlarının üretimi ve dağıtımı. Kapsamlı teslimat planımız çeşitli tip ve boyutlardaki motorları içerir:Alçak gerilim motoruÇıkış gücü 25 megawatt'a kadar çıkıyor.Sincap kafesli motor, kayma halkası motoru ve DC motor13.8kV'a kadar nominal gerilime sahip çeşitli soğutma ve koruma tipleri vardır.
Standart serimizi sunmanın yanı sıra,Özelliklere göre özel tasarımVe müşteri gereksinimleri. Özel uygulamalar için bireysel parçaların yanı sıra yedek veya yedek motorlar mevcut motorlarla mekanik ve elektriksel olarak değiştirilebilir. MENZEL temsilcisiYüksek kaliteli motor üretimi,Güvenilirlik, esneklik ve hız. Kişisel tavsiyeden planlamaya kadar size destek, bakım, devreye alma, tavsiye ve lojistik ile ilgili geniş bir hizmet yelpazesi sunuyoruz.
Bizimle kal.Tek kaynaklı proje planlama, inşaat ve üretimÇimento, kağıt, çelik ya da diğer endüstrilerdekiler gibi dünyadaki birçok fabrika operatörü MENZEL motorlarının kanıtlanmış kalitesine güvenmektedir.
Menzel ayrıca bir tane işletiyorSon teknoloji yük test alanıBerlin'de bulunan çıkış gücü 2.300 kVA'dır. Bu, yük altında 1.800 kW'a kadar test gücü ve yüksüz olarak 10.000 kW'a kadar test gücü sağlar-Harici müşteriler ve üçüncü taraf üreticiler için de geçerlidirTest alanımız, 6 kV dönüştürücüler, 3 ila 13.8 kV arasında yaygın olarak kullanılan tüm voltajlar için döner dönüştürücüler ve akım jeneratörlerini test etmek için yük dirençleri gibi en son elektronik ve mekanik ölçüm teknolojileri ile donatılmıştır.

BEN Buchele Elektromotorenwerke GmbH was founded in 1931 by Hans Buchele and until today, the company growed-up to a modern, middle classed, industrial business.
Main production are high quality special motors in grey cast iron construction, in smaller or middle sized quantities, and belonging to a various kind of customers requirements.
Our supply program contents three-phase induction motors with squirrel-cage or slipring-rotors for power up to 1100 kW, refering to the degree of protection, the duty cycle and the speed.
Our comprehensive technical documents will be mailed willingly on request.

With over 100 years of expertise, ASPINA excels in global product development as a trusted partner in manufacturing technical devices. Our expert team undertakes ODM projects, turning visions into reality from concept to production. The portfolio includes customized BLDC, stepper motors, blowers and robotics components for diverse applications in areas like medical & laboratory technology, automation, life enviroment, automotive and space. ASPINA's solutions power equipments like ventilators, syringe pumps, micro & insulin pumps and advanced medical robotics, including exoskeletons, centrifuges and vacuum pumps worldwide. In our other business units we provide our services for car applications like seat ventilation & HVAC, reaction wheels in sattelites, AMR Robots and robotic parts, ventilation systems and everywhere else, when a motor is needed. ASPINA - Compact, Light, Quiet.