تقنيات سلكية  شركات مصنعة، تجار، موردون، مزودو خدمات

Today the Walter Widmann GmbH now already is an exempt private company in that 3. Generation.
Our grandfather, Walter Widmann created that enterprise at the beginning of the thirties metalworking at that time.
In the fifties the core business producing by lathe was main, from bearing bushes and similar parts.
But in the beginning of the sixties the first experiences in the plastic injection molding technology were already gained on the legendary ARBURG C4B machines.
With the rapidly progressing development of the plastics engineering, also our enterprise grew up to a competent supplier of technical plastic parts.
A milestone was the development and patenting of our wire feeding units end of the sixties. With this technology completely new fields, which constitute the most important support leg of our enterprise up to the today's day, opened.
The wire feeding units are adapted constantly to most modern machine engineering. Together with our tool technology individual bending, coining/shaping and a moldong-in of wires in one single processing step is possible.
A philosophy of our enterprise is to attain a maximum of quality and customer satisfaction by continuous improvement of all our processes.
We are certified according to DIN ISO EN 9001/2000.
A guarantor for competence and know-how are our coworkers. Some of them accompany us already over decades and did also their training with us.

وDRAKENA Weißenfelser GmbH هو المورد الرئيسي لل، والأسلاك الأظافر، وسلاسل الحديد والسلع الصغيرة في ألمانيا. لدينا مصانع حديثة ومرنة نود استخدامه لتلبية احتياجاتهم الخاصة.
تجربة العمال المهرة والمتخصصين يضمن أعلى مستوى من الجودة في كل حالة.
العلاقات التجارية التي Weißenfelser المحدودة "DRAKENA" مع تشكيلات منتجاتها من الأسلاك تعادل المسامير، والدبابيس، وسلاسل الحديد الصغيرة والغنية وكانت أبعد من حدود أوروبا والقارات كافة.
ويمكن من خلال توسيع نطاق البضائع حلول متكاملة لمنشآت الخشب وسقف كرسي تصنيع، وموصلات الأخشاب لبناء وتقدم التجديد والبناء الجديد.
سلك هو في المقام الأول العملاء ذات الصلة لصناعة تجهيز الأسلاك مشرق ، وصلب المجلفن أو التصميم فقط المنشود في جميع الأحجام والحزم في نطاق حجم 0،9-7،0 مم الموردة.
السلاسل، ونحن نقدم ارتباط الصلب جولة سلاسل -- فحص ودون رادع، ورفع حبال وسلاسل، بما في ذلك جميع الملحقات المتوافرة من الصف ال 8 و 10 لعملائنا في ألمانيا وأوروبا. وعلاوة على ذلك الطوق من الصلب ، المجلفن أو من البلاستيك وتقديم أغلال قوة عالية.
واللوجستية المتطورة في اتصال مع توجيه التعاقد الضمانات أساسا في مستوى يتراوح تسليم حرة في غضون 3 إلى 4 أيام في ألمانيا.

Hereby we would like to present our new product catalogue for 2011. Since our mission is to develop and deliver lightning
protection solutions that meet the expectations of our customers, in 2011 we continue improving the production process.
In 2010 we introduced new anti – corrosion solutions for SILVER and PLATINIUM, series. The previous coverage has received
the name gold. Additional explanations you will find in “informations” chapter.
We know our customers want our products to be compliant with current standards, corrosion resistant and easily installable.
Therefore all our solutions meet those expectations. Additionally our team of consultants offers assistance in designing lightning
protection systems, and our production department is ready to manufacture unusual components.
As the only polish company in the field of lightning protection we have decided to maintain a standard to apply 12 μm thick
galvanic coating and yellow chromating. Electrogalvanised components are fabricated according to the standard pn-en
12329:2002 (corrosion protection of metals. Electrodeposited coatings of zinc with supplementary treatment on iron or steel).
Parameter correctness of the coatings on our products is supervised by the personnel of the galvanising plant where the latest
state-of-the-art methods and third-generation chemical agents are used to ensure the highest anticorrosion properties. We
also apply an additional sealing in the form of an exceptionally corrosion resistant organic polymer film to a galvanic coating (fe/
zn12/c/t2 according to the standard pn-en 1403:2002).
We galvanise all components – even screws and nuts – by ourselves. Hot-dip galvanised steel components fulfil the requirements
of the standard pn-en iso 1461:2000 (hot-dip galvanised coatings on fabricated iron and steel articles. Specifications and test
methods) and pn-en 13811:2005 (sherardizing. Zinc diffusion coatings on ferrous products. Specification; this applies to small
components). We use only proven quality certified materials. Our products were positively tested in a salt spray chamber proving
their excellence. The comparison of anticorrosion resistance of components available on the polish market can be found at
http://www.Ah.Com.Pl/information. The advantages of the aforementioned technological process enabled us to grant a 3-year
anticorrosion warranty for our products.
The company A.H. Hardt sp.j. Offers over 1000 variations of electrogalvanised, hot-dip galvanised, copper and brass
lightning protection components. On request we produce stainless steel components. We can also sherardise some of the
components.
All our products are fabricated with the use of instruments thus being repeatable. In compliance with the iso 9001:2000 procedures
we issue certificates of conformity, and according to the “b” sign certificate we can issue certificates of quality.
The company protects its solutions by means of patenting utility models with the patent office of the republic of poland. Having
registered 24 utility models we are the leader in the industry. In order to protect our customers from purchasing counterfeit
merchandise we mark our components with the company’s logo. Additionally our products have barcodes (ean13).
Our research and development department ensures not only that the offered components satisfy our standards, but also that
they comply with existing regulations and customers’ demands. The offered solutions are easily installable since they require the
use of only one type of spanner. The proper selection of dimensions of the products allows for sufficiently strong connections.
Information regarding novelties is first published at our website http://www.Ah.Com.Pl.
We make every effort to ensure that our offer is distinguished first of all by high quality. We implement our solutions with great
care. All our systems will guarantee you the comfort of installation and safety of use.
With kind regards,
Adam Hardt

Fabryka Drutu Gliwice sp. z o.o. (Die Draht und Drahtwarenfabrik Gleiwitz ) ist im Jahre 1852 gegründet worden und gehröt zu den ältesten Drahtwerken in Polen. Eine 155 jährige Tradition und hochqualifizierte Mitarbeiter garantieren eine hohe Qualität unserer Erzeugnisse. Das Hauptziel unserer Firma ist est, alle Kundenerwartungen hinscuchtlich der Warenqualität, Zuverlässigkeit von Lieferungen und Komplexbedienung zu erfüllen.

Telsas produces a wide spectrum of wire products, ranging from 0.50 mm to 6 mm, for major European, Middle Eastern, African and Asian companies.