13 شركة (شركات) بخصوص مكابس بالضغط ✓ الشركات المُصَنِّعة والتجار والموردين بقطاع المعاملات التجارية من 4 دولة (دول) ✓ مع خدمة خاصة للبحث السريع عن المعلومات والأسعار ✓
تصفية نتائج البحث باستخدام:
73054 آيسلينغن, ألمانيا ANDRITZ Vögtle GmbH تاجر ✓
من نحن
قراءة المزيد Voegtle Service is international engaged with purchase and resale of used presses and coil lines for metal forming for more than 70 years.
Established was the company by Albert Voegtle of an engineering office in Göppingen. Over time, the capacities of the warehouse were constantly increased. The head office is in Eislingen. We are a member of the Schuler Group since 1999.
Voegtle Service – the used choice quality has an established international reputation in the marketing purchase and resale of used presses and coil lines. Our company permanently stores about 400 of mechanical and hydraulic presses on 10.000sqm storage area. We furthermore offer feeding devices such as coilers, roller levelers, feed units and coil lines.
In addition, we have many years of experience repairing, servicing, and modernization of mechanical as well as hydraulic presses. Capabilities also include specially customized machines and accessories – including, if required, commission of the equipment at the production site.
Please note our data protection declaration
Established was the company by Albert Voegtle of an engineering office in Göppingen. Over time, the capacities of the warehouse were constantly increased. The head office is in Eislingen. We are a member of the Schuler Group since 1999.
Voegtle Service – the used choice quality has an established international reputation in the marketing purchase and resale of used presses and coil lines. Our company permanently stores about 400 of mechanical and hydraulic presses on 10.000sqm storage area. We furthermore offer feeding devices such as coilers, roller levelers, feed units and coil lines.
In addition, we have many years of experience repairing, servicing, and modernization of mechanical as well as hydraulic presses. Capabilities also include specially customized machines and accessories – including, if required, commission of the equipment at the production site.
Please note our data protection declaration
- مكابس بالضغط | مكابس تجريبية | مكابس صب بارد
76316 Malsch bei Karlsruhe, ألمانيا Industrie-Kontor GmbH شركة مصنعة ✓ تاجر ✓
نبذة عن الشركة إرسال استفسار
- مكابس بالضغط | الكبس | أجهزة طباعة
الشركات الأخرى التي قد تتطابق مع بحثك.
78112 St. Georgen, ألمانيا SCHMIDT Technology GmbH شركة مصنعة ✓ تاجر ✓ مورد ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
- مكابس طباعة | مضخات الضغط المزدوج | توجه الضغط
76327 Fribourg, ألمانيا WIFAG-Polytype Holding AG شركة مصنعة ✓ تاجر ✓ مورد ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
- مكابس طباعة | ضواغط رفع الركبة
25355 بارمشتيت, ألمانيا BIBRA Biagosch and Brandau Germany GmbH شركة مصنعة ✓ تاجر ✓ مورد ✓ مقدم خدمة ✓
نبذة عن الشركة إرسال استفسار
من نحن
قراءة المزيد BIBRA هي شركة مصنعة وموردة ذات خبرة لصناعة التعبئة المعدنية للآلات والأدوات محلية الصنع في جميع أنحاء العالم. يستخدم عملاؤنا أجهزتنا لإنتاج أنواع مختلفة من الأغطية والنهايات للمنتجات الدائرية وغير الدائرية، وقطعتين مسحوبتين عميقتين وخزانات DRD، وأسفل AE، وأغطية ملتوية وأذن. تأسست BIBRA في عام 1889 ومقرها في بارمستيد، بالقرب من هامبورغ، ألمانيا.
يمكننا الاعتماد على أكثر من 125 عامًا من الخبرة في صناعة التغليف وعقود من بيع آلات تصنيع العلب قبل أن نصنع أنفسنا لأكثر من 50 عامًا الآن. يستفيد قسم القوالب لدينا من أكثر من 40 عامًا من الخبرة في تصميم وبناء وتصنيع جميع أنواع قوالب القطع والرسم والتشكيل للقوالب والأدوات.
في عام 1999، نقلنا قسم القوالب إلى بامستيد، وفي عام 2009، تبعنا قسم الفرن. وبالتالي، فقد أنجزنا مهمة هامة تتمثل في تجميع جميع القطاعات تحت سقف واحد، وتقصير قنوات الاتصال، والنقل، وتحسين مراقبة الجودة. مع قرار تصنيع مطبعة O-frame الخاصة بنا في عام 2011، تمكنا من بناء خط إنتاج كامل لطابعة تغذية الورق الأوتوماتيكية مع نهايتها الخلفية تحت سقف واحد.
يشمل نطاق التصنيع لدينا جميع أنواع المكابس والآلات الخلفية، مثل بكرات، وآلات البطانة، والأفران الصناعية، وآلات تشكيل الأسطوانة، والمصنعين البشريين ( فتحات القفل). بالإضافة إلى ذلك، BIBRA هي واحدة من الشركات الوحيدة التي يمكن أن تصنع قوالب الختم الخاصة بها وأدوات لأجهزتها وغيرها.
يتم ضمان نجاحنا الدولي من خلال وضع عملائنا في مركز اهتمامنا. الجمع بين الجودة والمرونة والتركيز الشخصي هو ما تستحقه وما يمكنك توقعه منا.
يمكننا الاعتماد على أكثر من 125 عامًا من الخبرة في صناعة التغليف وعقود من بيع آلات تصنيع العلب قبل أن نصنع أنفسنا لأكثر من 50 عامًا الآن. يستفيد قسم القوالب لدينا من أكثر من 40 عامًا من الخبرة في تصميم وبناء وتصنيع جميع أنواع قوالب القطع والرسم والتشكيل للقوالب والأدوات.
في عام 1999، نقلنا قسم القوالب إلى بامستيد، وفي عام 2009، تبعنا قسم الفرن. وبالتالي، فقد أنجزنا مهمة هامة تتمثل في تجميع جميع القطاعات تحت سقف واحد، وتقصير قنوات الاتصال، والنقل، وتحسين مراقبة الجودة. مع قرار تصنيع مطبعة O-frame الخاصة بنا في عام 2011، تمكنا من بناء خط إنتاج كامل لطابعة تغذية الورق الأوتوماتيكية مع نهايتها الخلفية تحت سقف واحد.
يشمل نطاق التصنيع لدينا جميع أنواع المكابس والآلات الخلفية، مثل بكرات، وآلات البطانة، والأفران الصناعية، وآلات تشكيل الأسطوانة، والمصنعين البشريين ( فتحات القفل). بالإضافة إلى ذلك، BIBRA هي واحدة من الشركات الوحيدة التي يمكن أن تصنع قوالب الختم الخاصة بها وأدوات لأجهزتها وغيرها.
يتم ضمان نجاحنا الدولي من خلال وضع عملائنا في مركز اهتمامنا. الجمع بين الجودة والمرونة والتركيز الشخصي هو ما تستحقه وما يمكنك توقعه منا.
58454 فيتن, ألمانيا boesner Versandservice GmbH شركة مصنعة ✓ تاجر ✓ مورد ✓
نبذة عن الشركة إرسال استفسار
- مكابس طباعة
- مكابس طباعة | ضواغط / ترابيس غريبة الشكل
- مكابس طباعة | مكابس بثق | مكابس الإنضام
74150 Marigny-Saint-Marcel, فرنسا EMG PRESSE ETS LONG SAS شركة مصنعة ✓ تاجر ✓
نبذة عن الشركة إرسال استفسار
- مكابس طباعة | المكابس والشدادات
63073 Offenbach/Main, ألمانيا GEKO-Pressen KG شركة مصنعة ✓ تاجر ✓ مورد ✓
نبذة عن الشركة إرسال استفسار
- مكابس طباعة | صب البلاستيك
- مكابس طباعة | مكابس الإنتاج | مكابس هيدروليكية
من نحن
قراءة المزيد HIDRALMAC is one of the largest manufacturers of PRESSES, PRESS BRAKES, and SHEARS, located in Araraquara city, state of Sao Paulo, where there are two units with over 40 thousand m² of total area.
In 2015 the company consolidated its international actuation when it initiated a Joint Venture with its home office in Gelsenkirchen – Germany, opening its first international unit dedicated to selling equipment throughout Europe, HIDRALMAC Europe – Vertriebs – und Servicestützpunkt UG.
HIDRALMAC has been in this market for 21 years and it has produced over 4 thousand machines spread out through Latin America and Europe, they are built in series or customized. In 2003, the precursor of the double C-Frame press was manufactured, which became the company’s flagship and a great innovation in this machine sector.
In July 2014, the company began its professionalizing process by hiring its first CEO, and the creation of the Administrative Board of Directors, this phase optimized the production processes, reducing costs of the product while increasing its quality, adding improved benefits to its customers.
HIDRALMAC machines comply with the NR-12 requisites, imbued with quality and technology, as well as the best cost-benefit ratio on the market.
HIDRALMAC has a staff of engineers and developers who are highly qualified to supply the best services, providing not only solutions, but innovations to this market. The company actively participates in national and international trade shows, and promotes its Open House to open its doors to its customers, so they can know firsthand the latest and state-of-the-art technology in the machinery market.
In 2015 the company consolidated its international actuation when it initiated a Joint Venture with its home office in Gelsenkirchen – Germany, opening its first international unit dedicated to selling equipment throughout Europe, HIDRALMAC Europe – Vertriebs – und Servicestützpunkt UG.
HIDRALMAC has been in this market for 21 years and it has produced over 4 thousand machines spread out through Latin America and Europe, they are built in series or customized. In 2003, the precursor of the double C-Frame press was manufactured, which became the company’s flagship and a great innovation in this machine sector.
In July 2014, the company began its professionalizing process by hiring its first CEO, and the creation of the Administrative Board of Directors, this phase optimized the production processes, reducing costs of the product while increasing its quality, adding improved benefits to its customers.
HIDRALMAC machines comply with the NR-12 requisites, imbued with quality and technology, as well as the best cost-benefit ratio on the market.
HIDRALMAC has a staff of engineers and developers who are highly qualified to supply the best services, providing not only solutions, but innovations to this market. The company actively participates in national and international trade shows, and promotes its Open House to open its doors to its customers, so they can know firsthand the latest and state-of-the-art technology in the machinery market.
مكابس بالضغط - شركات مصنعة, تجار, متعهدون
إذا كنت ترغب في توفير وقتك يرجى ملء استمارة الخدمة الخاصة بخصوص مكابس بالضغط .
IndustryStock ستبحث لشركتك عن المُصَنِّع المناسب أو التاجر المناسب أو مُقدّم الخدمة المناسب بخصوص مكابس بالضغط وتُرسل رسالتك البريدية على الفور إلى هذه الشركات.
هل تبحث عن مكابس بالضغط؟ بالإضافة إلى ما يقدمه محرك بحث
هل تبحثون عن شركات مكابس بالضغط؟ لا يقدم محرك البحث للخدمات والشركات في IndustryStock النتائج ذات العلاقة بـ مكابس بالضغط و حسب. حيث يمكنكم أيضا العثور على المزيد من المنتجات والخدمات، وجميع بيانات الاتصال التي تخص التجار والمصنعين المسجلين في الموضوع مكابس بالضغط والذين يمكن لكافة المستخدمين الاطلاع على بياناتهم .
ما تقييمك للمعلومات الواردة بهذه الصفحة؟
2 التقييمات 100%