جهاز اختبار خاص  شركات مصنعة، تجار، موردون، مزودو خدمات

HPFM B.V., is a 100% private company, and deals with high pressure calibrations till 1.625 GPa. This will be achieved, with the full SI related units, and is based on the controlled clearance piston gage - deadweight balance system technology.
The current measurement uncertainty is 3.10-4.Pe (+/- 2.9 kg/cm2) All associated SI quantities & units within the aforementioned full scale during calibration, are 100% traceable to the EN ISO/IEC 17025 2017; accredited references. The output signals will be calibrated measured, with EN ISO/IEC 17025 2017; accredited standards, like mA, mV, V, mV/V, Pc-Bar.
Our local environmental calibration conditions, like the Te, Pe, rv are measured, recorded and filled on a 24-6-365 schedule. The center value of gravity is: 9.812.929.6 m/s2 We be able to calibrated all pressure related instructions as from 10 kPa.
As from 50 MPa, we be able to calibrate up and downwards per 50 MPa till 1625 MPa. The average duration for any high pressure calibration, like transducers, transmitters and gauges are within 3 days max. Including all associated calibration documents, like calibration reports, calibration certificates, calibration antifraud stickers and the total safe packaging for any global destinations. High pressure validation is also possible, for pressure safety valves, pressure relieve valves, pressure switches, and all static and also dynamic autofrettage procedures and sequences, as well positive and negative procedures.
Our high pressure know-how, experiences and expertise goes back for almost 40 years.

MicroContact AG – Testing technology for microelectronics, automation and robotics
We are a second generation family business with locations in Lostorf and Grenchen.
Thanks to the continuous development of our products and processes, we are setting new standards and enabling our customers to achieve technological and economic progress.
Since 1984, we have been manufacturing test systems and fine-pitch adapters for assembled and bare circuit boards. In our own test center, we test several million PCBs per year, of which the largest is in the fine-pitch range. Long-term experience as well as the applied synergy from adapter construction, mechanical engineering and test center enable us to meet the highest quality requirements.
As a supplier of efficient automation solutions and robot integration, we draw on our many years of experience in the areas of visual recognition and the most accurate positioning of workpieces. Our customer-specific automation systems are well-thought-out, simple and intuitive to use as well as qualitatively excellent processed products.

As a worldwide leading manufacturer of optical and digital precision technology, Olympus provides innovative solutions for state-of-the-art medical systems, digital cameras and scientific solutions.
The company’s award-winning products are instrumental in detecting, preventing and healing illness, driving scientific research and documenting life with artistic freedom.

Test and assembly machines for electronic components and products
ENGMATEC GmbH is globally present as a market leader in the field of test and assembly machines for electronic components and products.
The mechanical engineering company implements automation solutions for the most different production processes, from assembly to packaging. The portfolio ranges from test connectors over single workplaces, rotary tables and semi-automatic lines up to fully automatic complete solutions.
In addition to the assembly mounting the systems are often equipped with integrated measurement and test systems. Our special strength lies in the combination of automated or manual assembly processes with integrated test technology.
The field of measuring and test equipment includes standard modules for in circuit test and functional test (test adapters, test fixtures, in-line test systems), temperature testing systems and test plugs.
In addition, an extensive board handling program for printed circuit boards, soldering frames and workpiece carriers complements the product range:

• Conveyors
• PCB loader/unloader
• Handling systems
• Buffers
• Marking- and recognizing-units

Our equipment provides 100% process control by using high-value sensor technologies, e.g. force/displacement monitoring and vision systems. To ensure continuous traceability, the relevant process data of all assembly and test processes are acquired and sent to a higher data acquisition system.
As an automation specialist with a great deal of experience in process development and system planning and implementation, ENGMATEC offers its customers extensive engineering services. A team of highly qualified employees strive to fulfill all customer requirements.
Focal points are the areas of telecommunications, automotive industry, computer engineering, household appliances and equipment, activities in RF and RV engineering and entertainment electronics.
The company, based at Lake Constance, covers the full spectrum of services from design to service and maintenance.

الشركات
منذ عام 1980، كان اسم KURSCHAT مرادفًا في مجال الأتمتة وتكنولوجيا القياس للمستخدمين ذوي متطلبات الجودة العالية - قدراتنا التقنية وأفكارنا الإبداعية موضع تقدير، ونحن نحلل المهام الخاصة بالعملاء من خلال الحوار التعاوني ونجد الحلول الكاملة المثالية تقنيًا واقتصاديًا.
التطبيقات الخاصة للصناعات المختلفة هي خبرة Kurschat. يقوم مهندسونا وفنيونا ذوو الخبرة بتطوير حلول عملية بسرعة ومرونة، مثل أنظمة قياس السماكة اليدوية متعددة النقاط للمواد الحديثة مثل الأفلام الفنية أو التحقق من الجودة في صناعة السيارات. الموثوقية والسلامة هي أولوياتنا القصوى.
تكمن قوتنا في خبرتنا التقنية ومرونتنا الاستثنائية وعمق التطبيق في نطاق خدماتنا - مما يجعلنا نبرز من المنافسة.
تتميز معدات وأنظمة القياس عالية الأداء بمعايير عالية التقنية، وأبرز الابتكارات، والتشغيل العملي والبسيط، والحد الأدنى من الصيانة. يعمل نظام التحولات الثلاث بشكل موثوق ويضمن دائمًا جودة المنتج وكفاءته.

Pollux is specialized in the development, planning and setup of testing systems.
As an independent and neutral service provider we furthermore operate two testing facilities for turbochargers, combustion engines and components.
Our centrally located companies in Kirchheimbolanden (near Ludwigshafen) and Gommern (near Magdeburg) provide a good connection to the metropolitan areas of the German automotive industry.
The operation of our company-own test benches and test equipment at both testing facilities as well as concentrated development competence in the automatic control engineering is a clear benefit for our customers in both areas.
Our efficient and interdisciplinary teams comprising engineers and technicians provide customized solutions - even beyond the usual standards!

TAURUS – in a nutshell

• Our team comprises 26 motivated and engaged employees with extensive know-how, who like to think outside the box to find the optimum solution for your requirements.
• Our office is suited in the “heart of Germany”, Thuringia, Weimar.
• TAURUS Instruments was founded in 1990.
• We are working together with 17 distributors in more than 80 different countries.

and that is why we are …
Innovative through experience
TAURUS Instruments AG is one of the leading manufacturers of physical and optical measuring systems for industrial and research applications worldwide. We develop, manufacture and market state-of-the-art thermal conductivity measuring devices, hotbox test stations and fire testing systems for materials testing and quality control.
Always at your service
In close cooperation with our customers we also develop customized solutions in the fields of Thermal Conductivity Measurement and Fire Testing, guaranteed to meet their specific requirements while at the same time complying with the relevant international standards.
With our various service offerings we ensure that our customers receive competent help and support whenever needed, enabling them to use our products to their full potential.
Spanning the globe
Our extensive network of partners and distributors enables us to sell our products and services worldwide. Currently a wide range of international research institutions and industrial customers in the fields of materials testing and quality control successfully use products from TAURUS Instruments, benefiting from our many years of experience.
We take pride in our company’s history, which started in 1990 when it was founded as a spin-off
from the Institute for Building Materials of the former Berlin-based German Academy of Architecture.