Hose Pinch Valves  Manufacturers, Traders, Suppliers

HOmatic pinch valves are characterized by the following distinctive advantages:

• innovative, space-saving housing with a modern design

• energy savings of up to 40%
• low mechanical loads on the sleeve
• longer service life

• standard lightweight housing made of aluminium and/or POM plastic
• special series with housing made of stainless steel
• in general full flow cross-section in accordance with the DN rated width
• straight valve passage without constrictions or back-up points

• no clearance volume
• no clogging or blockage
• negligible pressure or friction losses

parts in contact with medium made of POM plastic or stainless steel, with the exception of the sleeve
from rated size DN 50, only the elastomer is still in the medium flow

• question of resistance reduced to a single point

optimum value for money

pneumatic conveying
food industry
plastic industry
chemical industry
environmental engineering
water treatment/sewage treatment plants:
apparatus construction/measuring and weighing systems
plant engineering/coating powder plants
building industry/cement industry
bulk transporters
trains, aircrafts
silos for bulk goods
mining/quarrying and clay industry

The valve solution for isolating and regulating/metering abrasive, corrosive and fibrous products such as granulates, powder, pellets, dust and liquids containing solids, etc.
Advantages:
Free flow of product, minimum frictional resistance, 100% leak free, no blockages and low net weight are among the most important benefits of pneumatic Pinch Valves.
A flattened and elliptical casing design of all flanged pinch valves ensures minimum compressed air consumption. This results in energy savings and ensures a specified, lipped fold pattern to the sleeve of the pneumatic pinch valve.
This specific, lipped fold pattern ensures the complete sealing of the product flow. Even large solids are enclosed by the sleeve in the pneumatic Pinch Valve and are thus tightly sealed.

Flange connection pursuant to DIN PN 10/16. ANSI on request.
Air connection standard G1/4" until DN150mm, DN200-3/8", DN250-1/2".

Pneumatic Pinch Valves are used in a variety of pneumatic conveying systems, such as the silos/cement sector, pigment and granulate handling, the ceramics/glass/plastics industries, waste water treatment, pharmaceuticals and foodstuffs industry, and winemaking. In addition, pneumatic Pinch Valves are used in metering and weighing systems, powder coating systems, vacuum toilet systems, vacuum conveying systems and vacuum and compressed air control units.