Automation controls  Manufacturers, Traders, Suppliers

Measuring, controlling, regulating and evaluating - when it comes to pioneering automation and digitalisation technology, the ifm group of companies is a pioneer and partner. Since the company was founded in 1969, ifm has been developing, producing and selling sensors, controllers, software and systems for industrial automation and digitalisation worldwide. Today, the ifm group of companies is one of the global industry leaders with around 9,055 employees.

• Controllers, I/O modules, displays and sensors for mobile use. * Compact and extremely robust designs. * Extensive range of accessories for mounting and diagnosis. * CAN interface with CANopen protocol. * e1 type approval by the Kraftfahrtbundesamt.

* Controllers, I/O modules, displays and sensors for mobile use. * Compact and extremely robust designs. * Extensive range of accessories for mounting and diagnosis. * CAN interface with CANopen protocol. * e1 type approval by the Kraftfahrtbundesamt.

The components presented here have been developed over a period of several years in close cooperation with customers and optimized for the increased requirements. Thus ifm electronic today offers a sophisticated control and automation system that meets the requirements of the market. In addition to flexibility and performance, the following points were especially emphasized: * Use also at low and high ambient temperatures. * Safety under extreme mechanical stress due to impact and shock loads. * Can also be used where dirt, water and moisture have a direct influence. * Operational reliability in case of strong fluctuations of the supply voltage in the battery/generator system. * Insensitivity to conducted and radiated interference on the entire electrical system. * Provision of an application-compatible networking option with the mobile-capable serial bus CAN. Requirements for the system Open communication Open communication standards allow ecomatmobile to be easily connected to other electronic components. In addition to networking via the CANopen protocol, gateway functions offer user-friendly interfaces. For example, the electronics of the drive motors can be integrated via SAE J1 939. Of course, the interfaces LBS+ and ISO bus, which are common in agricultural machinery technology, are also used. Remote maintenance and diagnostics The acquisition of diagnostic data in the sensors and network components - the basis for a powerful and cost-effective remote maintenance concept. The service and operating data are read out via a radio link and can be changed if necessary. The radio gateway CANremote is a GSM radio modem suitable for mobile use. It handles the data transfer between the CAN and GSM networks. In this way, faults can be rectified and machine functions optimised for the respective operating conditions. A service technician on site is not required. With the GPS option, additional machine positions can be recorded or position-dependent functions can be implemented (e.g. tracking, precision farming). Highest EMC resistance The sensors as well as the control components all meet the increased requirements regarding interference emission and sensitivity for mobile-suited components. In addition, a large proportion of the devices have e1 type approval from the Kraftfahrt-Bundesamt. These devices may therefore be fitted to vehicles without affecting their type-approval. Beyond the required EMC limit value of the e1 type approval, all devices have an extremely high EMC resistance of 100 V/m and easily tolerate automotive electrical pulses. Use under extreme conditions For use in mobile applications, the devices meet the important requirements: extended temperature range between -40°C ... +85°C, protection class IP67 and IP69 K for sensors. Special environmental tests such as salt spray test, cyclical temperature changes with humidity, rapid temperature changes do not affect the functioning of the devices. The robust, mobile-suitable housing design ensures high shock and vibration resistance. Electronics for hydraulics In mobile machines and systems, most functions are performed by hydraulic systems. The electronic control of valves and pumps is now standard in modern machines. The ecomatmobile system offers, for example, current-controlled PWM outputs and optimised controller functions for the power outputs. This means that the interface between hydraulics and electronics is no longer a problem, regardless of the supplier of the hydraulic components.

THE VAHLE GROUP - HOLISTIC SYSTEM PROVIDER FOR MOBILE INDUSTRIAL APPLICATIONS
WE ELECTRIFY AND COMMUNICATE
As one of the world market leaders, VAHLE develops high-quality power, data transmission and automation systems that are used in mobile industrial applications worldwide. Quality, dynamics, innovation and passion are the cornerstones of our company.
Founded in 1912 by the inventor of the first conductor rail, Paul Vahle, four generations have since developed the family business into a high-tech company. Then, as now, our mission was to provide intelligent applications that support the needs of our customers.For over 100 years, we led the industry and impacted the world market with our innovations.
In Schwoich (Austria), we operate an innovation and development center with VAHLE Automation GmbH. With production sites at our headquarters in Kamen as well as in Dortmund, we exclusively supply high-quality products "made in Germany". We maintain service locations worldwide so that we can respond to customer inquiries at short notice anywhere at any time.
Our portfolio includes products from the fields of power transmission (vPOWER), data communication (vCOM), positioning (vPOS) and control (vDRIVE). With our flexible solutions, we primarily address customers from the amusement rides, intralogistics, people movers, crane technology, automotive, port technology and general industry.
Your Vision. Our Solution.

Highly efficient, cost-effective electrical cabinets designed and service specifically for your needs.

C3351 MODBUS-TCP/MODBUS-RTU PLC CONTROLLER (CODESYSV3.5)
Product Feature:
ODOT PLC C-3351 Codesys V3.5
1.Reliable, compact, easy to expansion IO, can support up to 32 I/O modules.
2. It could be applied to multiple industries and scenarios such as mechanical processing equipment, sewage treatment, textile, non-standard automation, etc.
3. Seamless communication with reliable connection. Modbus TCP Server and Modbus TCP client are supported simultaneously.
It supports Modbus RTU master or slave.
4. It is a programmable system that follows the IEC61131-3 international standard. It supports five programming languages such as ladder diagram (LD), instruction list (IL), structured text (ST), function block diagram (CFC/FBD) and Sequential Function Chart (SFC).

Technical Parameters
Hardware Specification
System Power: Nominal 24Vdc, Range-9-36Vdc
Protection: Overcurrent Protection, Reverse Protection: YES
Power Consumption: 110mA@24Vdc
Internal BUS Supply Current: Max.2A@5VDC
Isolation: System Power to Field Power Isolation
Field Power Supply Power Supply: 22~28V(Nominal 24VDC)
Field Power Supply Current: Max. DC 8A
I/O Modules supported: 32 pcs
Wiring: Max.1.5mm²(AWG 16)
Mounting Type: 35mm Size DIN-Rail
Size: 115*51.5*75mm
Weight: 130g
Environment Specification
Operational Temperature: -40~85℃
Operational Humidity: 5%~95% RH(Condensation)
Protection Level: IP20
EtherCAT: Parameter
Protocol: EtherCAT
Process data area: Input Max.1024 Bytes, Output Max.1024 Bytes
Network Interface: 2 RJ45
Speed: 10/100Mbps, MDI/MIDX, Full-Duplex
Max.Bus Legenth: 100m
Technical Parameters
General Parameters
System power supply：22-28VDC（Nominal 24VDC）
Protection：Anti-reverse connection protection
Module consumption：70mA@24Vdc
Internal Bus supply current：Max：2.0A@5VDC
Isolation：system to site power isolation
Field power supply：22-28V（Nominal 24V）
Field supply current：Max. DC 8A
Number of supported I/O modules：32 pcs
Wiring diameter：Max.1.5mm² (AWG 16)
Way to install：35mm DIN rail
Dimension：115 * 65.5 * 75mm
Weight：120g
Environment Parameters
Operating Temperature：-30~70℃
Environment Humidity：5%~95% RH(No Condensation)
Ingress Protection Rating：IP20
Programming Specification
Programming Software：CODESYS SP17
Programming language：IEC 61131-3 (LD, IL, ST, CFC/FBD, SFC)
Maximum State Tasks：5
Bit Instruction Cycle：0.21us
Word Transfer Cycle：0.39us
Floating Point Operation Cycle：0.42us
Program Memory：1MBytes
Data Storage：1MBytes
Power-down Protection Area：3KBytes
RTC：Not Supported
Maximum Expansion Module：32
Modbus Master Max Channel Numbers：10
Modbus Master Command Max Length：
Function Code 1(Read Coils)：2000
Function Code 2(Read Discrete Inputs)：2000
Function Code 3(Read Holding Registers)：125
Function Code 4(Read Input Registers):125
Function Code 15(Write Multiple Coils)：440
Function Code 16(Write Multiple Registers)：27
Function Code 23(Read/Write Multiple Registers)：25+25
Interface Parameters
Interface：2 * RJ45 & 1 * RS485
Network Port Baud Rate：10/100Mbps, Adaptive and full duplex
Network Protocol：Modbus TCP，the default IP of the device is 192.168.0.15
Serial Port Configuration（RS485）：Supports Modbus RTU/ASCII, the baud rate is 2400~115200bps, and supports the parameter configuration of parity code and stop bit
LED indicator：6 LEDs PWR STAT RUN NET IRN IER
Link Parameters
Modbus TCP Client：Max supports for connecting 6 Modbus TCP servers
Modbus TCP Server：Max supports for 6 Modbus TCP clients connected
Modbus RTU Master：Max supports for connecting 5 slave devices
Modbus RTU Slave：Max supports for connecting 1 master device
Technical Parameters
General Parameters
System power supply：22-28VDC（Nominal 24VDC）
Protection：Anti-reverse connection protection
Module consumption：70mA@24Vdc
Internal Bus supply current：Max：2.0A@5VDC
Isolation：system to site power isolation
Field power supply：22-28V（Nominal 24V）
Field supply current：Max. DC 8A
Number of supported I/O modules：32 pcs
Wiring diameter：Max.1.5mm² (AWG 16)
Way to install：35mm DIN rail
Dimension：115 * 65.5 * 75mm
Weight：120g
Environment Parameters
Operating Temperature：-30~70℃
Environment Humidity：5%~95% RH(No Condensation)
Ingress Protection Rating：IP20
Programming Specification
Programming Software：CODESYS SP17
Programming language：IEC 61131-3 (LD, IL, ST, CFC/FBD, SFC)
Maximum State Tasks：5
Bit Instruction Cycle：0.21us
Word Transfer Cycle：0.39us
Floating Point Operation Cycle：0.42us
Program Memory：1MBytes
Data Storage：1MBytes
Power-down Protection Area：3KBytes
RTC：Not Supported
Maximum Expansion Module：32
Modbus Master Max Channel Numbers：10
Modbus Master Command Max Length：
Function Code 1(Read Coils)：2000
Function Code 2(Read Discrete Inputs)：2000
Function Code 3(Read Holding Registers)：125
Function Code 4(Read Input Registers):125
Function Code 15(Write Multiple Coils)：440
Function Code 16(Write Multiple Registers)：27
Function Code 23(Read/Write Multiple Registers)：25+25
Interface Parameters
Interface：2 * RJ45 & 1 * RS485
Network Port Baud Rate：10/100Mbps, Adaptive and full duplex
Network Protocol：Modbus TCP，the default IP of the device is 192.168.0.15
Serial Port Configuration（RS485）：Supports Modbus RTU/ASCII, the baud rate is 2400~115200bps, and supports the parameter configuration of parity code and stop bit
LED indicator：6 LEDs PWR STAT RUN NET IRN IER
Link Parameters
Modbus TCP Client：Max supports for connecting 6 Modbus TCP servers
Modbus TCP Server：Max supports for 6 Modbus TCP clients connected
Modbus RTU Master：Max supports for connecting 5 slave devices
Modbus RTU Slave：Max supports for connecting 1 master device

Applied for industrial automation area related for control system and data collection solutions.

In 1945, Walter Pepperl and Ludwig Fuchs founded a small radio workshop in Mannheim, Germany, based on the principles of inventiveness, entrepreneurial foresight, and self-reliance. The experience they acquired was transformed into new ideas, and they continued to enjoy developing products for customers. The eventual result was the invention of the proximity switch. This innovation represented the starting point of the company's success story.
Today, Pepperl+Fuchs is known by customers around the world as a pioneer and an innovator in electrical explosion protection and sensor technology. Our main focus is always on your individual requirements: With a passion for automation and groundbreaking technology, we are committed to working in partnership with you now and in the future. We understand the demands of your markets, developing specific solutions, and integrating them into your processes."