Balancing Controller  Manufacturers, Traders, Suppliers

Measuring, controlling, regulating and evaluating - when it comes to pioneering automation and digitalisation technology, the ifm group of companies is a pioneer and partner. Since the company was founded in 1969, ifm has been developing, producing and selling sensors, controllers, software and systems for industrial automation and digitalisation worldwide. Today, the ifm group of companies is one of the global industry leaders with around 9,055 employees.

THE VAHLE GROUP - HOLISTIC SYSTEM PROVIDER FOR MOBILE INDUSTRIAL APPLICATIONS
WE ELECTRIFY AND COMMUNICATE
As one of the world market leaders, VAHLE develops high-quality power, data transmission and automation systems that are used in mobile industrial applications worldwide. Quality, dynamics, innovation and passion are the cornerstones of our company.
Founded in 1912 by the inventor of the first conductor rail, Paul Vahle, four generations have since developed the family business into a high-tech company. Then, as now, our mission was to provide intelligent applications that support the needs of our customers.For over 100 years, we led the industry and impacted the world market with our innovations.
In Schwoich (Austria), we operate an innovation and development center with VAHLE Automation GmbH. With production sites at our headquarters in Kamen as well as in Dortmund, we exclusively supply high-quality products "made in Germany". We maintain service locations worldwide so that we can respond to customer inquiries at short notice anywhere at any time.
Our portfolio includes products from the fields of power transmission (vPOWER), data communication (vCOM), positioning (vPOS) and control (vDRIVE). With our flexible solutions, we primarily address customers from the amusement rides, intralogistics, people movers, crane technology, automotive, port technology and general industry.
Your Vision. Our Solution.

Welcome to Willburger System GmbH who is an international distribution company, your number one leading provider of innovative mechanization systems and electronic components from a single source. Willburger System GmbH was founded in 1985 and works with leading designer and manufacturing companies i.e. SMAC moving coil actuators, Ametek Power Instruments and Gladiator Technologies.

Sampling and quality control
While representative sampling (by hand) itself is already difficult enough, the mechanized sampling (for installation) is a great challenge for operators and users - especially with heterogeneous solids, which often do not behave as expected.
Each process and product is unique and the influencing factors of the process vary widely. Many vendors are trying to take part in this area of business and offer their products - but which is the right one for the application and meets the requirements?
Here, we have the right expertise: almost 20 years of experience in the field of bulk materials and process industries - we have developed countless innovations and application-specific solutions. Our product portfolio is the result of these experiences. We manufacture and market proven sampling systems, which we develop and market under the brand GMP SAMPLING. Many companies worldwide already benefit from our solutions together with our application experience.
But we also do not know everything - and that is what we tell you. Let us develop a solution together with what you know and what we know. Do You Have Questions? Please do not hesitate to contact us.

esd electronics is an internationally operating company located in Hannover, Lower Saxony,
Germany. The medium-size company develops and manufactures hardware and software for the industrial automation market with a main focus on custom-specific solutions. This comprises the development of flat modules and systems based on PowerPC as well as ARM and Intel processors.
Furthermore, esd electronics is specialized in design of fieldbus systems such as CAN (CANopen, CAN FD) PROFIBUS, PROFINET and EtherCAT. The company develops plug-in card families such as AMC, CompactPCI, PMC, PCI, PCIe, VMEbus and XMC as well as USB devices. For most automation systems esd electronics offers various standard and real-time operating systems as well as qualified support. This particularly includes VxWorks, QNX, RTX, OS-9, Linux as well as Windows and others.
The custom-specific automation solutions are developed by a team of highly qualified and motivated engineers. The manufacturing capacities are available from prototyping to larger serial production. Training and workshops complete the development services.
esd electronics is mainly active in the industrial sectors of automotive and machine industry, medical as well as aerospace technology. In addition to a subsidiary in the US, esd's products are also distributed by long-standing partners in Japan, China and Israel as well as by distributors in Europe.

As a leading automation solution provider, we are specializing in industrial communication product R&D, industrial automation control system design, integration and technical services.

Our products has Verification of EMC compliance "CE" BY SGS and Quality Management system ISO9001 : 2015, We are also a member of PROFIBUS &PROFINET Association (PIChina), EtherCAT Technology Association, CC-Link, OPC, CCIA, Industrial Internet Alliance and other associations. And our mentor Kevin Wang leading us all the way until now since we started as a technical company since 2003.
In 2003, ODOT Automation was founded by Mr. Wang, and started as a project company in the Mianyang City.

We built projects with a widely range from PA to FA by our engineering team, and during these time we found profit is dropping while materials keeps on going. This causes less competitive for our project and Mr. Kevin decided to change everything.

In 2013, we started to build our product with the years of experience we gained from the project.

The first product is ODOT-DPM01, a Modbus-RTU to Profibus-DP gateway. And for immediately responsing to market demands, ODOT had build our engineer team as ODOT R&D center. With the R&D center, we have developed an all-encompassing automation data solution from PLC, Controller IIOT, Cloud to Sensors and Actuators to I/O system and via the most popular fieldbuses and ETHERNET standards.

In these years of experience, at the beginning we have started from 11 employees to today with 30 technicians and up to more than 100 employees, and own a factory of over 4000 square meters. Now we built ODOT product line which is consisted of PLC, remote I/O module, integrated I/O module, IIOT gateway, protocol converters, serial gateway, industrial Ethernet switches, industrial wireless, embedded modules and etc.
Since 2013, ODOT Automation has successfully provided professional field data collection solutions for Auto and New Energy, Wind Power, Textile enterprises, Automobile accessory enterprises, Cereal & oil processing enterprises, Food and Beverage producing enterprise, water treatment, power management, hydro power station, liquor producing enterprises etc. With our expertise the site real-time data could be smoothly and accurately transmitted to the upper level management (MES and ERP), so that the smart manufacturing could be truly implemented and the real-time data of MES could show the first-hand data of the production site.

In 2022, ODOT first PLC based on Codesys V3.5 was tested successful, and in 2023 it will be ready in the market.

We have built a long-term relationship and trust with our customers. We are always happy to provide value added services to beyond customer requirements and expections.

In the future, we will keep Innovation and development more products with "applied, aesthetic, affordable and in-depth tailored services to meet cunstomer requirements".

Zhejiang Wesno Industrial (Group) Co., Ltd. specializes in "accessories" as its main business, with leading products including control cabinets, control boxes, and enclosures Operating housings/ support arm systems/ stand systems、 Industrial junction boxes, drag chains, three color lights, machine tool protection, etc. have been widely praised by domestic and foreign customers. The product is widely used in machine tool manufacturing, automation equipment, general machinery manufacturing of engineering machinery, automotive production lines, wind energy equipment, photovoltaic equipment, new energy equipment and other fields. The company is creating higher quality products, creating potential savings and solutions, as well as reliability and operational safety.

We design and manufacture electronic controllers and we have our own products for industrial automation and for fuel stations, and beside the traditional CNC services, we offer complete solutions for helping big companies, startups, kickstarters or individuals, to make their product ideas a reality, through 3D modelling, manufacturing and the final assembly.
Do you need a ready-made product or a custom solution for your automation and electronic systems? Is that unique product missing from the shelf that you need for a special application?
No problem – we design and manufacture electronic products, even on demand!
• Heating system controllers and automatic regulators
• Analog transmitters, signal converters and signal splitters
• Industrial communication converters, signal adapters, Modbus I/O modules
• Measuring devices: conductivity and temperature transmitters, flow sensors
• Temperature and conductivity sensors
• Wireless smart transmitters and receivers for serial communication
• Smart relays
Our offerings cater to two key sectors: industrial automation and the fuel industry.
In industrial automation, our product range includes Analog Temperature Transmitters, Galvanic Isolators, WiFi-enabled Conductivity Transmitters, Modbus I/O Modules, and more.
For the fuel industry, we offer innovative solutions like the Universal Service Remote Control for fuel pumps, RS485 module for DOMS, USB to RS485 Converter, among others.
We have a CNC machining, manufacturing service too. Beside the traditional CNC services, we offer complete solutions for helping big companies, startups, kick-starters or individuals, to make their product ideas a reality, through 3D modelling, manufacturing and the final assembly.
We also repair all kinds of fuel station electronics, and we have a department for the development, design and repair of electronic devices.
For more information about us, please, feel free to ask or visit the www.levtech.ro/product website.
Since our establishment in 2016, we have grown to become a global provider of industrial automation electronics.
We are looking for professional distributors and MRO partners to represent our innovative and competitively priced product lines.