Prefabricated Concrete Components  Manufacturers, Traders, Suppliers

Corners
Corner formations are unavoidable in many building projects. In addition to our angular retaining walls, we offer various functional corner designs for this purpose. Outside and inside corners with a height of up to 405 cm are offered as standard for 90° or 135° angles. On customer request we also produce corner elements for building constructions with different angles.
Useful tips and information

• M12 sleeve plugs are provided on the base side as offsetting and assembly aids for the one-piece external corners. With the aid of e.g. cable loops M12, these can be moved and installed.
• If a corner element is connected to angle support walls with a foot length of more than 45 cm in the case of Bl 49 cm (95 cm in the case of Bl 99 cm), an element with a shortened foot (connecting part) must be inserted (please order if required).The feet of this connecting part must be connected to the normal and corner elements by reinforced concrete.
• Corners are to be covered extensively with concrete (at least C20/25) in a thickness d >= 20 cm. Reinforcement at the bottom and top with at least Q335A.
• Elegant solutions for the corners of your building project can easily be realised with the corner constructions for our PRIVANT and GIGANT® angle brackets.

As standard solutions, we manufacture 90° inner and outer corners with straight edges for you. But also individual solutions such as 135° inside and outside corners as well as variable angles completely according to your specifications can be produced without any problems.
Corner elements made of angle brackets can basically be produced in two variants: as outside or inside corner. In the outer corner, the visible side of the angle support is on the outside, in the inner corner the visible side is formed by the inner sides. The angle sizes of the corner elements are variable: 90°, 135° or an individually desired size.
All special elements are alternatively available in the surface designs a, b, c and d.
finishes:
a = visible surface outside, smooth; surface inside, rough
b = visible surface outside, smooth; surface inside, hand-smoothed
c = visible surface inside, smooth; surface outside, rough
d = visible surface inside, smooth; surface outside, hand-smoothed
For PRIVANT 10 one-piece corners on request