Industrial Ground  Manufacturers, Traders, Suppliers

Industrial floors are available in a variety of different structures and materials. Depending on the expected load and existing subfloor, the range extends from a simple coating to multi-layer structures. If heavy loads are transported, the requirement must be designed higher than with lower loads. State-of-the-art production and storage technology as well as the continuous modernization and optimization of production processes have permanently changed the appearance of the industry. With this progress, the demands placed on industrial floors are also growing. The stresses caused by hand pallet trucks and forklifts are increasing just as rapidly as the demands placed on the appearance of the industrial floor used. Roads and sidewalks should be colour-coded, e.g. for safety reasons, as should storage areas or restricted areas to prevent injuries or accidents. Due to the high point load and friction caused by the wheels and tyres of forklifts and hand pallet trucks, the industrial floor is exposed to high mechanical loads which it should be able to withstand for years or even longer. In the course of time, cracks, outbreaks or other damaged areas become increasingly apparent. If these are not repaired or repaired in a timely manner, these areas grow inexorably. The damaged and thus then uneven ground leads to increased wear on forklifts and hand pallet trucks. Another result of damaged substrates is increased dust and noise pollution. Conventional industrial floors such as concrete, screed, tiles or stone have to be renovated in a cost-intensive and time-consuming manner. Shot blasting or sandblasting, sanding, filling and priming are not only associated with a time-consuming production downtime but also with considerable noise and dirt nuisance. Costs that can be easily saved by using an industrial flooring system in the form of interlocked PVC tiles. The system of Lock-Tile GmbH Germany, which has been on the market since 1983, offers the industry different thicknesses from 5 to 10mm depending on the expected load. A possible repair of this system is very easy. Individual tiles can be easily replaced. Without production downtime and without dirt and noise.