Bulk Material Conveying Technology  Manufacturers, Traders, Suppliers

Air Conveyor Trough for the horizontal transportation of dusty material
Application
The air conveyor trough is used for horizontal transportation of dusty material. (Semonimal) gravally products cannot be transported. Depending on the material type and conveying capacity, the air conveyor trough nust be installed with an angle of inclination betwenn 5° - 7°.
Material Body:
St 1203, AIMg 3 oder Mat. 4541 und 4571 Aeration plate: Synthetic substances or Sinter metall (Pewter bronze or VA) Sealing: Rubber
Construction
The air conveyor trough consits of an upper- and lower box, which is separated by the porous aeration plate. The dispersion air is blown into the lower box, while the material to be conveyed is being moved. Both boxes are firmly screwed together and sealed against each other. The conveyor troughs are manufactured in pieces not longer than 2500 mm max. and can be screwed together to any length. Appropriate in- and output elements are supplied. An air ventilator is normally used as air source, which is firmly mounted onto the conveyor trough. Ech conveyor trough section has a hand inspection part as shown in schematic.
Electrical equipment
As operating drive for the ventilator a special motor is used. Protection and voltage according to request.
Operation data:
Air volume/m2: dependent on trough inclination and porous material Air pressure: dependent on porous material
Special features
Using the air conveyor trough, a gentle conveying of powdery material is guaranteed. Only limited obsolescence occurs as against mechanical conveying belts like screw conveyors as rotating parts are not used.
The aeration plate has a long lifetime and can often be regenerated. The hand inspection part allows a controlled operation and maintenance e.g. to clean the trough without dismanting. Unlimited input- and output end elements can be installed. Conveying length does not matter, as long as enough height is available.
Measurement table
Construction ist subject to change.

We offer a comprehensive range of conveyor belts. Our products always adhere to the highest standards. This is why quality assurance and quality management are particularly important to us. Extensive inspection, test and development methods ensure perfect service
quality and excellent product properties.

Conveyor belt systems fulfil important functions in all industrial sectors. Although every conveyor system is different customers seek and require the most efficient and technically perfect solution. Tailor made to fit the user’s individual requirements.
germanBelt’s promise and service is, together with the user, to find, commission, maintain and repair the optimal conveyor belt solution.

A & S Förderanlagen is an experienced medium-sized company for mechanical-engineering situated in the Münster region of Central Germany characterized by individual solutions, flexibility and reliability. For more than 20 years our staff of 10 employees successfully constructs and produces special machines and plants for conveyor systems on behalf of customers of most different industrial areas e.g. the chemical industry, the cement industry or breweries.

We manufacture spare parts and plant components for the entire mill construction, brewery and malting technology for horizontal and vertical transport for all types and properties of bulk materials such as:dusty, free-flowing flour, seeds, granular and small pieces, poorly flowing;- Cereals, wood chips, bone meal, sugar

• difficult flowing, moist
• moist chemicals, oil seeds, green malt

In many materials and variations:Stainless steel

• mild steel
• stainless steel
• manganese steel
• Hardox steel
• plastics
• coated