18 companies for Screw Equipment ✓ B2B manufacturers, distributors & suppliers from 2 countries ✓ With special service for fast information and prices ✓
Filter:
30880 Laatzen, Germany ISITEC ANLAGEN MESSTECHNIK Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Screw Equipment | Sorting Requirements | Workpiece Fixture
45141 Essen, Germany Atlas Copco Tools Central Europe GmbH Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Screw Equipment | Screw Tighteners
72116 Mössingen, Germany Blaier GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Production Devices | Test Device Engineering
71642 Ludwigsburg, Germany Deutsche Vortex GmbH & Co. KG Manufacturer ✓ Trader ✓ Service provider ✓
Company Profile Send enquiry
About us
Show more Die Deutsche Vortex wurde am 1.4.1965 gegründet, um ein völlig neues Pumpenprinzip auf den Markt zu bringen. Durch das verwendete Antriebssystem - den patentierten Kugelmotor, bieten Vortex - Brauchwasser Umwälzpumpen entscheidende Vorteile.
Fortschrittliche Technik mit modernsten Fertigungseinrichtungen ermöglichen den höchsten technischen Standard.
Das zertifizierte Qualitätsmanagementsystem wurde 1997 eingeführt. Damit garantieren wir von der Produktentwicklung über die Wahl der Materialien bis hin zur Produktion und Logistik beste Qualität.
Produktionsstätte, Entwicklung, Verwaltung und Verkauf befinden sich in Ludwigsburg.
Im Bundesgebiet wird die Deutsche Vortex von der Werksvertretung Hermann Schmidt in Essen vertreten. Wir verstehen uns als Partner des Sanitär- und Heizungs-Fachgroßhandels und setzen auf den 3-stufigen Vertriebsweg. Das bedeutet, bei VORTEX wird nur produziert, und nur der Großhandel vertreibt unsere Produkte an das Fachhandwerk.
Die Auftragsabwicklung erfolgt über das Werk in Ludwigsburg. In Europa übernehmen lagerführende Handelsvertretungen den Verkauf.
Die Deutsche Vortex gehört seit dem 1.1.1999 zur GRUNDFOS-Unternehmensgruppe.
Seit 2014 ist die Deutsche Vortex IHK Ausbildungsbetrieb und wir unterstützen die nationalen und internationalen Berufswettbewerbe.
Fortschrittliche Technik mit modernsten Fertigungseinrichtungen ermöglichen den höchsten technischen Standard.
Das zertifizierte Qualitätsmanagementsystem wurde 1997 eingeführt. Damit garantieren wir von der Produktentwicklung über die Wahl der Materialien bis hin zur Produktion und Logistik beste Qualität.
Produktionsstätte, Entwicklung, Verwaltung und Verkauf befinden sich in Ludwigsburg.
Im Bundesgebiet wird die Deutsche Vortex von der Werksvertretung Hermann Schmidt in Essen vertreten. Wir verstehen uns als Partner des Sanitär- und Heizungs-Fachgroßhandels und setzen auf den 3-stufigen Vertriebsweg. Das bedeutet, bei VORTEX wird nur produziert, und nur der Großhandel vertreibt unsere Produkte an das Fachhandwerk.
Die Auftragsabwicklung erfolgt über das Werk in Ludwigsburg. In Europa übernehmen lagerführende Handelsvertretungen den Verkauf.
Die Deutsche Vortex gehört seit dem 1.1.1999 zur GRUNDFOS-Unternehmensgruppe.
Seit 2014 ist die Deutsche Vortex IHK Ausbildungsbetrieb und wir unterstützen die nationalen und internationalen Berufswettbewerbe.
40549 Düsseldorf, Germany ENERPAC GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Screw Fitting Devices | Screw Connection Tools
94327 Bogen, Germany Eugen Metzger GmbH Hydraulik-Zubehör Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Hydraulic Screw Connections | Pipe Fittings
8222 Beringen, Switzerland FMS-Technik AG Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Transport Facility | Screw Fitting Devices
12623 Berlin, Germany FMW DIEHL GmbH WERKZEUGE FORMEN Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Production Devices | Test Device Engineering
- Screw Equipment | Screwed Angle Fitting | Screw Connections
08527 Plauen, Germany Gustav Obermeyer GmbH & Co. KG Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Screw Equipment | Filling Device
39104 Magdeburg, Germany TorcUP Schraubtechnik Deutschland GmbH Manufacturer ✓ Trader ✓
Company Profile Send enquiry
- Screw Equipment
42551 Velbert, Germany Walter Schütz GmbH Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Production Devices | Test Device Engineering
9020 Klagenfurt, Austria L&W Maschinen -Handel, Service & Metallbau Manufacturer ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Production Devices | Discharging Equipment
28197 Bremen, Germany Wieland Eucaro GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Flange Screw Connections | Pipe Fittings
73760 Ostfildern, Germany Würschum GmbH Manufacturer ✓ Trader ✓ Supplier ✓ Service provider ✓
Company Profile Send enquiry
- Screw Equipment | Screw Fitting Devices | Packing and Filling Devices
Description
In addition to the calibratable axial tightening methods with the DISC and the CLAMP, the hydraulic lengthening of the bolt is often used. With the program dW1350 we also offer these systems to our customers.
Screw expansion cylinder
All models of the dW1350 series are designed for the maximum load of screws of strength class 10.9 with regard to their tensile force. The single-acting hydraulic system is retracted via a spring system after pressure relief. The nut is turned by hand using a gear wheel system accessible from the outside, which is operated by a hand ratchet.
JetBOOSTER
High operating pressures are often required to operate hydraulic screw expansion cylinders. This usually requires independent hydraulic power units that cannot be used for any other hydraulic device. With the JetBOOSTER, we offer a powerful pressure amplifier that uses low input pressures to quickly generate high output pressures for screwdriver spindles. And that up to 1,800 bar. The system is easy to handle and can be retrofitted to any double-acting hydraulic unit. Equipped with an overpressure valve, a check valve and a precision manometer, the JetBOOSTER is simply hooked onto the carrying handle of the hydraulic unit and is ready for operation.
Technical data
Show more Special technical features:
- axial preload system up to 1,350 bar operating pressure
- Hydraulic connection rigid or rotatable
- precise adjustment of the tractive forces
- Overstroke protection for testing purposes
- can be used with the JETBOOSTER pressure intensifier on any hydraulic power pack
- simple service
- retrofittable and removable at any time
- Screw Equipment | Screw out tools | Screw Fitting Devices
About us
Show more From own experience
More than 45 years of know-how of machine construction, especially in fields of packaging, find reflex in our comprehension of quality and performance. The owner is in the same time also a chief business executive, so that we see in our costumers always and first of all partners. It is good for both of us!
From single source
The high percentage of own components in our products allow us offering rapid and individual solutions. Reliability, flexibility and compatibility of our facilities provide with smooth proceedings and maximal efficiency. In favor of you!
From conviction
We stand by Germany as location. It offers a maximum of product and manufacturing quality. It is a matter of course for us to create a professional perspective for young people. That is why we are also occupied in professional formation. In favor for all of us!
Bünder & Schmitt is your partner for solutions.
More than 45 years of know-how of machine construction, especially in fields of packaging, find reflex in our comprehension of quality and performance. The owner is in the same time also a chief business executive, so that we see in our costumers always and first of all partners. It is good for both of us!
From single source
The high percentage of own components in our products allow us offering rapid and individual solutions. Reliability, flexibility and compatibility of our facilities provide with smooth proceedings and maximal efficiency. In favor of you!
From conviction
We stand by Germany as location. It offers a maximum of product and manufacturing quality. It is a matter of course for us to create a professional perspective for young people. That is why we are also occupied in professional formation. In favor for all of us!
Bünder & Schmitt is your partner for solutions.
Screw Equipment - Manufacturers, Traders & Suppliers
Little time to search for quotes for Screw Equipment? Fill in the special service form now.
Our consultants will find for you the best manufacturers, distributors or service providers for Screw Equipment and will forward your mail request to these companies immediately.
Are you looking for Screw Equipment?
Are you looking for Screw Equipment. IndustryStock's product and service search engine will not only help you find relevant results for Screw Equipment but also related products and services. All contact information of listed Screw Equipment manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?
18 Reviews 94%