Sludge Drying Plants  Manufacturers, Traders, Suppliers

Introduction
The Harter devised Drymex® sludge drying technology is capable of drying aqueous sludges of any kind in an energy saving, closed system at low temperatures. Such drying decreases the weight and volume of your sludge so that your disposal cost is significantly reduced. Drymex® drying systems are used for previously dewatered sludges.
On the following pages, you – no matter if you are a plant operator, construction company or planning office – may find advantages of our drying technology, how it works and where it is applied.
Your Benefits
Less Weight, less Volume, less Costs
The use of our Drymex® sludge drying technology will reduce the weight and volume of your sludge by as much as 60 percent. You may thus cut down your disposal cost by and equivalent 60 percent, at best.
The right Air at the right Place
The perfect combination of extremely dry air and adequate air routeing ensures uniform, efficient and reliable sludge drying.
HARTER Pilot Plant Station - to be on the safe side!
You can use the HARTER Pilot Plant Station to test the drying characteristics of your sludge. You can watch how efficiently our technology works for your product!
Fast Return on Investment
Investment in a HARTER sludge dryer can be recouped quickly by saving cost for sludge disposal.
Almost no Emission
The closed system with heat recuperation uses waste heat which reduces cost of operation and enhances economy. There is practically no emission.
Energy Saving and Low Temperature
The use of a heat pump system reduces power consumption to a minimum depending on the sludge properties and the dryer used. Drymex® sludge dryers operate at low temperatures between 20 °C and 50 °C.
Lasting Value, Robustness, Reliability
Top quality material ensures high availability and lasting value of our systems. Drymex® sludge dryers are corrosion resistant, of lasting value, robust and always reliable.