7 companies for Safety Ceramics ✓ B2B manufacturers, distributors & suppliers from 2 countries ✓ With special service for fast information and prices ✓
- Ceramic tubes and rods are used in many technical equipments.The tubes and rods are made from materials C-799, C-530 and C-610.Our...
- Structural Ceramics - Ceramic parts offer many advantages in comparison with parts made of hardened or coated steels and tungsten ...
- Nozzles - Ceramics find widely application as nozzle materials. Two excellent characteristics - very high wear resistance and chem...
- Ceramic Insulators - Ceramic insulators are mainly produced from porcelain, steatite, cordierite or alumina. These materials exhib...
- Ceramics for Wire Processing - Ceramic parts are usually used in wire processing and galvanic wire plating as wire guides and pull...
- Ceramic Parts for Welding - Since years ceramic welding nozzles, pins, rollers for the high frequency welding of tubes, and cerami...
- Ceramic materials exhibit very high mechanical strength which is required for the application as components for machines and equipments.
- The hardness of advanced ceramic materials is above 9 on Moh´s Scale, and only diamond is harder (which rates 10 on Moh´s Scale). For this reason ceramic materials are excellent suitable for the production of parts with very high wear resistance e.g. for the paper-, textile- and wire industry.
- The low density of the ceramic material is advantageous in the design of rotating movable parts such as bearings, valves, and rotors.
- Ceramic materials are extremely heat resistant. The properties of metals can be significantly above 500 ° C after. Construction ceramics, however, can also be used above 1000 ° C. Ceramic components, for example in the metal industry in direct contact with molten metal (eg Abziehringen) is used.
- In contrast to metals ceramic materials react only insignificant with acids and bases. Therefore they are ideal for the application in chemical industry.
- Ceramic materials exhibit very high mechanical strength which is required for the application as components for machines and equipments.
- The hardness of advanced ceramic materials is above 9 on Moh´s Scale, and only diamond is harder (which rates 10 on Moh´s Scale). For this reason ceramic materials are excellent suitable for the production of parts with very high wear resistance e.g. for the paper-, textile- and wire industry.
- The low density of the ceramic material is advantageous in the design of rotating movable parts such as bearings, valves, and rotors.
- Ceramic materials are extremely heat resistant. The properties of metals can be significantly above 500 ° C after. Construction ceramics, however, can also be used above 1000 ° C. Ceramic components, for example in the metal industry in direct contact with molten metal (eg Abziehringen) is used.
- In contrast to metals ceramic materials react only insignificant with acids and bases. Therefore they are ideal for the application in chemical industry.
Moreover, ceramic materials are bioinert and are used as implants (e.g. hip joint endoprosthesis, tooth pins, malleus).
All ceramic materials (also non-oxide) exhibit excellent oxidation resistance at high temperatures.
- Safety Ceramics | Ceramic Technology | Ceramic Parts
- Safety Ceramics | Circuit fuse | Fuse Holder
- Safety Ceramics | Circuit fuse | Fuse Holder
- Safety Ceramics | Circuit fuse | Fuse
- Safety Ceramics
To ensure that our fuses meet national and international norms, engineers from SIBA sit on a variety of standardization committees. However, we strive for more than that. A large segment of our products have also been certified by independent certification bodies and test centres for compliance with German, U.S. and other international specifications.
At SIBA, tried and tested quality means more than just individual products you can count on: our quality management system also guarantees optimized workflows. We regularly engage auditors to make sure of that.
Reliability, Competence and Innovations for more than 110 years!
We one of the leading manufacturers of Technical Ceramics in the world.
In addition, we produce Plastic Components at the highest stage.
With ignition systems, heating elements, filtration components and hybrids, we furthermore offer ready to install Functional Components and Composites.
Safety Ceramics - Manufacturers, Traders & Suppliers
Use our special service form and enter your search query for Safety Ceramics.
IndustryStock searches for your company the suitable manufacturers, dealers or service providers for Safety Ceramics and sends your mail immediately to these companies.
Are you looking for Safety Ceramics?
Are you looking for Safety Ceramics. IndustryStock's product and service search engine will not only help you find relevant results for Safety Ceramics but also related products and services. All contact information of listed Safety Ceramics manufacturers, traders, suppliers and dealers are freely available to all users.
How do you rate the information on this page?