Lead-Through for Control Cabinet  Manufacturers, Traders, Suppliers

Cable entry systems

for standard cables

Even when entering standard cables icotek offers a wide range of products with a lot of advantages in comparison to conventional cable glands.
The compact, slim and innovative design of the icotek systems offer a professional appearance and high ingress protection classes up to IP68 / NEMA 4X.
Due to high packing densities especially suitable for applications where a lot of cables have to be entered through a small space.

Benefits:

1. High packing density
The cable entry plates KEL-DPZ and KEL-DP offer the opportunity to enter a large amount of cables through a small space.
2. Fast and easy assembly 
Installation of cables by pushing the cables through the thin, pierceable membrane.
3. No new punch-out tools required
The KEL-DP range matches exactly the drilling templates, as well as cut-outs according to the standard dimensions for multi-pole connectors (for example from Harting, Wieland).
4. Tight sealing
Depending on the product a very high sealing rate up to IP68 / NEMA 4X can be achieved.
5. Flexibility
Due to the large variety of designs and sizes available, there is a solution for every application.
6. Customised solutions
If you cannot find what you need in our standard product portfolio, custom solutions are available upon request.

BR-Cable bushings®
refractory, gas- and watertight, for installation, bricking-in and concreting into walls, or for welding into steel constructions
Our 50 years of experience on the German market stand behind this system. It consists of steel frames that are built into ceilings or walls, walled in or set in concrete. We call the frames for this RGB. RGS frames are available for welding into steel structures. Retrofitting of already installed cables is also possible.
Our systems are fireproof according to F90, gas- and watertight. We would be pleased to come to you to plan with you and for you the installation of our systems. We will also be happy to carry out the installation for you with our specialist staff.
Cable bushings are intended to protect the cables from mechanical damage such as chafing or edge pressure and to prevent foreign bodies and water from entering the building. In addition, a seal against gases or a partitioning can be required as a fire protection measure. Cable ducts should be permanently leak-proof, even in the presence of pressurized or non-pressurized water, gases or air. Cable ducts can be taken into account as early as the planning phase and the necessary measures such as fire protection in accordance with DIN 4102 or building seals in accordance with DIN 18195 can be reliably planned. Cable bushings are differentiated according to their application and area of use. Essential distinguishing features are: