Environmental Test Chambers  Manufacturers, Traders, Suppliers

The MKF series is ideally suited for all tests in accordance with current temperature and climatic test standards based on DIN and IEC standards. The required temperature and humidity values can be attained rapidly and maintained accurately, even under extreme conditions. The unparalleled ease of operation as well as extensive standard features provide that ‘little extra’ in handling.

• Temperature range without humidity -40 °C to 180 °C - Temperature range with humidity 10 °C to 95 °C - Humidity range 10 % RH to 98 % RH

- Temperature range without humidity -40 °C to 180 °C - Temperature range with humidity 10 °C to 95 °C - Humidity range 10 % RH to 98 % RH

climatic test temperature test material test

Environmental Test chamber is a device used to simulate and control various environmental conditions in order to test the performance and reliability of products and materials in different environments. It can regulate temperature, humidity, air pressure . Vibration, antennas and other parameters and provides stable environmental conditions. Manufacturers can use environmental simulation cabinets to assess the quality, reliability and dependability of their products to ensure that they can function properly under a variety of environmental conditions.

1. The appearance can be in different colours or all stainless steel according to the internal design, and the interior is made of SUS304# stainless steel.
2. Rectangular multi-layer glass observation window is used to observe the test product during the test. The observation window is equipped with an anti-sweat electric heating device to prevent condensation of water droplets.
3. Explosion-proof lights are installed in the room to observe the product tests. The bottom of the laboratory is fitted with non-slip aluminium plates for safety in use.
4. The double insulation seal of the door can effectively isolate the internal temperature leakage.
5. Pure water filtration device directly filters tap water, easy to use, no need to add water manually.
6. The refrigeration and dehumidification system adopts imported brand compressor, which has the advantages of energy saving, low noise, low energy consumption and stable performance, and adopts environmental protection refrigerant (R23, R404a).
7. The controller adopts imported LCD screen, which can display the measured value and set value and time at the same time.
8. The controller has a multi-segment program, so you can quickly edit the temperature and humidity and ramp rate.
9. TEMI 2700 Table 7.5 inch TFT LCD with RS-232/RS-485 communication interface and 2GB standard SD memory card for Ethernet connection; TEMI 880 Table 5.7 inch colour display with RS-232/RS-485 communication interface (optional on request).
10. The bottom of the machine is made of channel steel welded into a mesh structure for increased load bearing and never deformed; integrated test chamber with mobile castors and positioning goblets installed at the bottom; access to the bottom of the component test chamber.

Application areas for Environmental Test Chambers include electronics testing, the automotive industry, the aerospace industry, the pharmaceutical industry, the optoelectronics industry and construction materials. They are used to assess the performance, reliability and suitability of products under different environmental conditions and to identify potential problems in advance and improve product quality.

CTS GmbH is one of the world's leading specialists in the manufacture of environmental simulation equipment for research, quality assurance and production. The innovative and technically high-quality CTS temperature and climatic test chambers, produced in a highly modern production facility at the Hechingen site, are valued worldwide by the most renowned industrial companies for their outstanding reliability and perfection.

Research, quality assurance and production.