Sealing Tapes  Manufacturers, Traders, Suppliers

• General Engineering
• Special machinery
• Plant engineering
• Production
• Workshop
• various

- General Engineering
- Special machinery
- Plant engineering
- Production
- Workshop
- various

• Choice of material (TPU, PA, POM, ABS, PE, etc.): It all depends on the chemical and physical conditions to which the parts are exposed. With our own toolmaking, mouldmaking and design departments, we can offer you a full service.
• Numerous potential applications: Our ester and ether materials are very hardwearing and flexible and are used in applications with the toughest mechanical demands, e.g. sowing and sifting systems.
• Two components: A glass fibre-reinforced material plus a soft inner coating result in products that can be used as loadbearing parts, for example. Such parts would be inconceivable without precise planning plus development and test phases.
• Test samples: Before ordering an injection mould, we often produce samples for approval using laser sintering or 3D printing to avoid the need to invest in a mould at this stage. Our machines can produce injection-moulded parts weighing between 5 and 6000 g.

femo Compressed Joint Sealing Tape BG1 anthracite, 1 roll à 10 m 15/3 mm
The reca femo Tape BG1 is an impregnated, pre-compressed foam joint sealing tape. Equipped with a self-adhesive strip as a mounting aid. Particularly suitable for the external sealing of expansion joints, prefabricated parts, partition walls as well as window and door connections.
Note: Not suitable for use in standing water. Tape must not be brought into contact with aggressive chemicals containing solvents.
Note: (In practice there are several processing possibilities)
1. Measure the joint width and select the corresponding strip dimension.
2. cut off the overcompressed start or end piece.
3. Add at least 1 cm when cutting the joint sealing tape to length.
4. remove oil, grease, dirt and mortar residues from the joint.
5. Fix the pre-compressed joint sealing tape to the window with the help of the self-adhesive or lay it directly from the roll into the joint.
6. Tapes can be laid one after the other without any problems.