Conductivity Measurements  Manufacturers, Traders, Suppliers

SE 655 Toroidal Conductivity Sensor

Universal and precise sensor with high chemical resistance over a very large measuring range. For heavily polluted media.

Facts

• Robust design
• Extremely large measuring range due to inductive measuring principle
• Insensitive to contamination
• No process-wetted electrodes
• High chemical resistance (PEEK)
• Measurement in hazardous locations
• Steam-sterilizable
• CIP-capable

Number of electrodes 4 shafts Epoxy, black Electrode material Graphite Shaft length 120 mm Shaft diameter 15.3 mm Temperature sensor NTC (30 kOhm): -5 ... +100 ºC Immersion depth min. 36 mm, max. total length incl. cable Pressure resistance 2 bar Cell constant 0.475 cm-1 ±1.5 % Measuring range 1 µS/cm ... 500 mS/cm

• for the determination and control of cell constants ZU 6945 (1 ampoule for the preparation of 1000 ml 0.1 mol/l NaCl solution) - for the determination and control of cell constants Conductivity ZU 0348 12.88 mS/cm ±1 % (0.1 mol/l KCl), 250 ml ready-to-use solution - for determination and control of cell constants. Conductivity ZU 0349 1413 µS/cm ±1 % (0.01 mol/l KCl), 250 ml ready-to-use solution - for determination and control of cell constants, low ZU 0350 Conductivity 15 µS/cm ±5 %, 300 ml ready-to-use solution

- for the determination and control of cell constants ZU 6945 (1 ampoule for the preparation of 1000 ml 0.1 mol/l NaCl solution) - for the determination and control of cell constants Conductivity ZU 0348 12.88 mS/cm ±1 % (0.1 mol/l KCl), 250 ml ready-to-use solution - for determination and control of cell constants. Conductivity ZU 0349 1413 µS/cm ±1 % (0.01 mol/l KCl), 250 ml ready-to-use solution - for determination and control of cell constants, low ZU 0350 Conductivity 15 µS/cm ±5 %, 300 ml ready-to-use solution

Smartec CLD134 is a measuring system for inductive conductivity in the food & beverage and life sciences industries. The combination of a transmitter and a sensor is interference-free and especially easy-to-use. It meets the highest hygienic and sterile demands thanks to its food-grade virgin PEEK body, its jointless and creviceless design and its hygienic certificates. Smartec CLD134 is therefore the ideal package to ensure the highest safety and quality of your products and processes.

Measuring Principle: Inductive
Application: Food, beverage and pharmaceutical industries and biotechnology.
Characteristic: Specifically intended for use in hygienic applications and especially suitable for following applications:; Phase separation, control of CIP, concentration control, product monitoring, leakage monitoring.
Measurement range: 100 µS/cm - 2000 mS/cm; cellconstant k : 6.31/cm
Measuring principle: Inductive conductivity measurement
Design: Hygienic design with FDA certified virgin PEEK body including all hygienic certifications.
Material: In contact with medium: Virgin PEEK; Surface roughness: Ra

Our laboratory is equipped for electrical measurement variables, temperature measurement technology, pressure measurement technology, flow, mechanical measurement variables etc.
Our offer

• Calibration of standards, measuring instruments and test equipment as ISO calibration (factory calibration). Thanks to our DAkkS accreditation, we are entitled to issue DAkkS calibration certificates for direct current and LF sizes.
• Calibration on site
• Repair of measuring and testing equipment
• Management of measuring and testing equipment
• Collection and delivery service (Berlin area)

• 4 research & development centres
• 5 production locations
• 5 system houses
• 36 subsidiaries worldwide
• 2,400 employees