Non-Slip Solutions  Manufacturers, Traders, Suppliers

Many falls occur in the area of stairs. The high-contrast marking and at the same time anti-slip equipment at the beginning, course and end of the stairs can help to prevent accidents caused by falling or tripping.
Safety-StairStair nosing profiles and step plates are made of stainless steel and are covered with a factory-glued anti-slip coating in various designs. Due to its high slip resistance, the product is suitable for industrial applications and can also be used outdoors. The glued-on anti-slip coating is easy to remove and can be retrofitted with replacement strips at any time at low cost.
The Safety-Stair Step Profiles are equipped with our Safety-FloorEasy-to-Clean anti-slip coverings and are therefore easy to clean compared to conventional anti-slip coverings and remain visually attractive for longer. The anti-slip inlay is protected in the profile and is therefore more durable than a pure anti-slip covering.
The improved visibility of the steps also makes it easier for people with impaired vision to use stairs safely.
Our Safety-Stair anti-slip profiles offer a quick and easy solution for retrofitting stairs, stairways and landings. These are equipped with pre-drilled holes for screwing the profiles together or with adhesive on the back for bonding.

Anti-slip
profiles ..for the interior
Safety-Stair step profiles for indoor use

• Slip resistance R10
• light and stainless aluminium profile
• pleasant haptics, also for barefoot walking

suitable

• inexpensive and easy to install due to

Screws or adhesive tape

• Inexpensive retrofitting or conversion of the profiles

Possible through replacement strips

• good cleanability and low dirt absorption

through the use of the Easy-to-Clean anti-slip covering
Standard dimensions(HxWxL)30 mm x 60 mm x 1000 mm,
Special lengths or other colours on request.
Each profile can be supplied with holes, screws, bolts, screws
and dowels or equipped with an adhesive tape.

Anti-slip
profiles ..for outdoor and industrial areas
Safety-Stair step profiles R13

• Slip resistanceR13
• light and stainless aluminium profile
• high wear resistance due to protected

horizontal anti-slide coating

• UV and weathering resistant
• inexpensive and easy to install due to

Screws or adhesive tape

• Inexpensive retrofitting or conversion of the profiles

Possible through replacement strips
Safety-Stair stair nosing profiles

• Slip resistanceR13
• robust stainless steel (V2A)
• UV and weathering resistant
• no expensive preparatory work for installation

necessary

• Cost-effective and easy to install due to

Screws or special
adhesive Each profile can be supplied with holes, screws, bolts, screws
and dowels or delivered with a special adhesive
will be.
Standard dimensions (DxWxL):
2 mm x 30 mm x110 mm x 660 mm or 2 mm x
30 mm x 110 mm x 1000 mm. special formats, further
colours, patterns or texts on request
Safety-Stair stair plates

• Slip resistanceR13
• robust stainless steel (V2A)
• UV and weathering resistant
• no expensive preparatory work for installation

necessary

• cheap and easy to install

by screw or special adhesive
Each plate can be supplied with holes, screws, screws
and dowels or delivered with a special adhesive
will be.
Standard dimensions (DxWxL):
2 mm x 110 mm x660 mm or 2 mm x 110 mm
x 1000 mm.special formats, other colours, patterns
or texts on request.

Self-adhesive anti-slip coverings for industrial and outdoor applications as well as for
indoor and administrative areas