Brush Machines  Manufacturers, Traders, Suppliers

Features:

• Knot types: stringer bead twist, cable twist, rose bud twist, stringer bead with tight rose bud
• Disk magazine with up to 100 disks
• Automatic hole punching in the operating position
• No index hole required, even with pre-punched disks
• Automatic brush ejection
• Smallest disks for 6-hole end brushes up to 450 mm diameter
• Automatic wire feeding from hank, programmable
• Simple machine set-up
• Touch screen colour display
• USB stick for data storage and logging of production data
• Air-conditioned switch box
• Operation from multi-stranded hank possible
• Automatic disk feeding from magazine
• Processing of 0.15 mm wire possible
• Minimal wire loss due to new twist knot head design
• Picker for cut wire optionally available

Highly flexible, fully automatic twist knot machine for everything from small production lots up to large series. Knot filling and punching is done on one station, to ensure exact positioning of the twist knot holes. The machine covers the full range of brush sizes from large to small.
Disks up to 150 mm in diameter can be automatically fed from magazine, larger disks can be fed by hand. Ready punched disks without index hole can also be used. In the process with hole punching about the first half of the disk is punched at a rate of up to 220 holes/min. Following this punching and knot filling are carried out simultaneously at a rate of up to 33 knots/min.

Capacity punching: up to 220/holes min.
Capacity twisting: up to 33 knots/min.
Brush outer diameter: up to 600 mm(23.5"), untrimmed
Program memory: 400 brush programs
Pitch diameter (punching): min 48 mm (1.9")
Disk magazine: for 100 disks, max. outer Ø : 150 mm(6")
Wire diameter: 0.25 - 1 mm (0.001 - 0.039")Wire qArea required: approx. 2.4 x 2.0 m (8 ft x 6.5 ft)
uality: oil tempered wire, hard drawn wire ...