Brushing Systems  Manufacturers, Traders, Suppliers

We are committed to developing innovative solutions to reduce the omnipresent risks of pathogens and contamination. The PROFESSIONAL brush range includes cleaning equipment that is required for daily use. All products are characterized by high quality and stability, so that for the individual need can be selected;

All products in this range are available in up to 8 different colours. This enables you to make an exact assignment; the devices remain in use in a precisely defined area. This prevents cross-contamination from the equipment and facilitates compliance with regulations.

• available in up to 8 colours for differentiation and for use in HACCP systems
• Dishwasher safe (industrial)
• Operating temperature range: -18°C to +79°C
• autoclavable up to 134°C
• All components are FDA/EU approved
• Independent migration tests provide proof that all plastics used are within FDA/EU limits.

Features
• Production of brush segments in disks with crimped wire
• Servo driven technology for high production rate
• Integrated disk magazine
• Integrated disk punching
• Secure wire holding by pressed retaining tab
• Optimally balanced segment thanks to perfect wire distribution
• Minimal use of metal parts for low material costs
• User-friendly programming with new screen structure
New and highly flexible machine for wire brush segment production from metal disks and crimped wire. Holes for wire feeding and positioning are punched directly on the machine. Wire feeding and cutting are made parallel to disk punching with automatic transfer
between both stations. No ready punched metal parts (ring and eyelet) are required as in the case of traditional brush segments, offering
highest flexibility at lowest cost.
Process: Crimped wire fill is fed from spool and pushed through the punched holes in the disk. The wire is then cut, radially bent and secured by pressing with the specially designed retaining tab. At the same time on a second station the
special hole contour with the retaining tab is punched in the disks, which are fed by magazine. Disk transfer between the stations is made automatically.

Capacity: 30 wire bundles/min.
Brush diameter: 200 - 400 mm (7.87" - 15.75")
Disk diameter: 80 - 280 mm (3.16" - 11")
Wire diameter: 0.15 - 0.35 mm (0.0059" - 0.0138")
Hole diameter: 11 mm (0.43")
Disk magazine: for 100 disks, max. Ø 180 mm (7")
Change-over time: 30 min.Program storage: 400 bElectrical connection: 15 kW, 3 x 400 V, N/PE, 50 Hz
Area required: 2.4 x 2.2 m (8 x 7 ft 2.6")
rush programs