شیر کنترل فرآیند  تولیدکنندگان، عرضه‌کنندگان، توزیع‌کنندگان

این شرکت در سال ۱۹۵۹ تاسیس شد و مقر آن در توکیو ژاپن است. در ابتدا SMC شرکتی بود که به طور عمده عناصر فیلتر "فیلتر صنعتی فلز سینتر" را توسط متالورژی پودر تولید می کرد و پس از چندین دهه تلاش و نوآوری مداوم ، محصولات SMC به تدریج غنی شده و با تکیه بر کیفیت عالی ، کاربران بی شماری را به خود جلب کرده است. امروز ، SMC به یک رهبر جهانی در صنعت پنوماتیک تبدیل شده است. نام اولیه این شرکت "SMC" (به معنی "شرکت فلزی سینتر شده") به دلیل سالها شهرت در جهان مورد استفاده قرار گرفته است و به یک نام جهانی یکپارچه تبدیل شده است.

شرکت ABA BEUL ، آموزشی ویبولیتین
این شرکت در سال ۱۸۹۵ توسط آگوست بیول تأسیس شد و هنوز هم توسط صاحبان نسل چهارم اداره میشود و به بازارهای چهار خط تولید خود در Attendorn در منطقه South Solland ، از جمله فناوری ساخت و ساز ، فناوری اتصال ، تصفیه آب و اجزای ریخته گری FlexGuss خدمت می کند. مواد برنجی ، فلز توپخانه و فولاد ضد زنگ به محصولات با کیفیت بالا پردازش می شوند: از قطعات استاندارد تا قطعات ویژه با تکنولوژی بالا.

KUNDENOPTIMIERTE LÖSUNGEN VON IHREM KOMPETENTEN PARTNER
Insbesondere im Bereich der
Rückschlagventile
Überdruckventile
Druckregler
haben wir Lösungen, die Ihresgleichen suchen. Überzeugen Sie sich selbst

Wer wir sind und was wir leisten
MIT ist einer der führenden Anbieter von Systemlösungen für die Prozesstechnik. Wir übernehmen die komplette Abwicklung Ihres Projektes und liefern am Ende eine einbaufertige Baugruppe. Wir bieten Ihnen ein All-inclusive- Paket angefangen von der Projektierung über die Konstruktion bis zur Fertigung und schließlich dem Service. Hauseigenes Engineering und eine moderne Fertigung ermöglichen flexible und intelligente Lösungen auf IDEALLINIE. Aufbauend auf unserem umfangreichen Industriearmaturen-Sortiment finden wir für jede Anwendung die passende Lösung!

Wir entwickeln Ventiltechnologie und Prozessanlagen für höchste Ansprüche.
Die Komponenten dafür stellen wir am Unternehmens-standort in Riesbürg her.
Als Kunde profitieren Sie von weltweiten Qualitäts- und Herstellungsstandards.
Unsere Lösungen tragen entscheidend zur Prozess-Sicherheit bei.

SchuF Fetterolf entwickelt und fertigt Ventile zur Regelung, Absperrung, Trennung, Verteilung, Zusammenführung und Entnahme von Gasen, Flüssigkeiten, Schlämmen oder Pulver.
SchuF wurde 1911 in Deutschland gegründet und verfügt heute über Konstruktions- und Produktionsstandorte in den USA, Irland, Indien, Deutschland und Brasilien.
Die Gründer von SchuF waren die Erfinder des Drehschiebers und der Kegelboden- und Kolbenbodenventile.
Heute verfügt SchuF über eine umfangreiche Produktpalette, die sowohl auf diesen bewährten Erfindungen basiert als auch viele herausragende Neuentwicklungen aufweist, wie z.B. das erste Mehrwege-Verteilerventil oder das einzigartige "X-Flash" Regelventil.
Ventilportfolio
Unsere Produktpalette von Industrieventilen ist speziell auf die hohen Anforderungen der chemischen, petrochemischen, polymerproduzier-enden und Off-Shore- sowie Gas- und Ölindustrie abgestimmt.

As a fast-growing high-tech company, Schubert & Salzer Control Systems develops, produces and distributes highly precise industrial control and stop valves which are applied in the process industry.
Our valves are amongst the most efficient in today’s market when it comes to energy consumption, durability and noise pollution. Their compact design and high control accuracy minimize installation and maintenance requirements and ensure high operational and process reliability with exceptionally long service lives. To maintain this advantage, many resourceful minds at Schubert & Salzer are working to perfect these properties a littlemore every day.
Valves by Schubert & Salzer are used in the production of chemical or pharmaceutical products, food and beverage processing or the production of plastics, steel, glass or paper, as well as in the textile industry – in short, wherever liquid or gaseous flows need to be controlled, we will be there for you.
We are Schubert & Salzer Control Systems GmbH headquartered in Ingolstadt. Our subsidiaries in the Benelux, France, India, the UK and the USA as well as more than 40 international partners offer you and your customers quality products from Schubert & Salzer "Made in Germany”.

Founded 1969, KFM Regelungstechnik GmbH is primarily involved with control and regulation in industrial heating and process engineering in almost all sectors of industry, including shipbuilding. Both electronic controllers and control valves are supplied, so that, if necessary, the entire control system can be obtained from on source. lf desired, this can also include qualified consultation and advice on control technology.
The company has particularly wide experience and capability in the heat transfer oil sector. One place where this can be seen is in the design and construction of the KFM heat transfer oil control valves. Pneumatic and electrical actuators are manufactured by the company, and are also obtainable with integrated electronic position controllers.
The range of digital industrial and process controllers manufactured extends from simple units to high-performance devices, and are available in all common housings and plug-in formats. Up to eight relay outputs and a large number of signal inputs and outputs may be implemented on each device, and include digital interfaces and connections to all current industrial bus systems.
The devices can all be fitted with one or more of a wide range of controller functions. A modular extension system allows a large number of optional additional functions and supplementary equipment to be installed, including programmable, cascaded and ramp setpoint versions. In spite of the wide variety available, all versions are user-friendly and are easy and straightforward to handle.
Special approvals have been granted for use with thermal transfer oil heaters (DIN) and for marine applications (GL, BV, DNV). Another speciality, much in demand, are special „tailored" series, constructed to special customer requirem

The GEMÜ Group is a leading manufacturer of valves, measurement and control systems for liquids, vapours and gases.
Globally focused family-owned enterprise in its second generation
This globally focused independent family-owned enterprise was founded in 1964 by Fritz Müller and has become one of the top choices globally for process media control thanks to its range of innovative products and customized solutions.
As a family-owned enterprise, GEMÜ is now being led by the second generation of the family – Managing Partner Gert Müller and his cousin Stephan Müller.
A whole series of innovations and awards
The two Managing Directors, Gert Müller and Stephan Müller, prioritize innovation and have future-oriented plans for GEMÜ. As part of these plans, the company founded a start-up business with inevvo solutions in October 2018 that makes use of the opportunities offered by digitization and further develops and markets Industry 4.0 solutions such as the RFID-based CONEXO system.
That`s not all – when it comes to their products, awards such as the "ACHEMA Innovation Award" speak to GEMÜ`s strength as an innovator and implementer of novel training concepts, one of which uses their own virtual reality training program, developed in-house.
Over 2200 employees worldwide
The Group currently employs over 2200 members of staff worldwide, over 1200 of whom are in Germany. They have six manufacturing locations: Alongside their manufacturing sites in Germany, GEMÜ manufactures its products in Switzerland, France, China, Brazil and the USA. Their worldwide marketing is carried out across 27 subsidiaries, coordinated from Germany. Thanks to a large network of commercial partners, GEMÜ is now active in over 50 countries on all continents.

Beyond standard: Our mission is to make the product you have dreamed of. We are fluid control specialists. Come to us with your problem, let it be in agriculture or in special medical applications. We listen to you and find the right solution. Whether tailoring one of our existing products to your need or design to your specifications, we will build with you the solution. A large engineering team is supported by nearly 200 people specialized in fluid control. If required, we can add sensors, control and motion control actuators to the project based on internal competences in the group.
We make the most sophisticated proportional solenoid valves, the most accurate dosing valves for agriculture or control manifolds with sensors, valves and electronics. All our production facilities are certified ISO 9001