12 Sociétés concernant les Filtres pour tuyaux ✓ fabricants, distributeurs ou prestataires de services B2B de 3 pays ✓ Avec service spécial pour des informations et des taris rapides ✓
Donaldson Filtration Deutschland GmbH
Distributeur ✓- Filtres pour tuyaux | Filtre pour liquides | Filtre d'aspiration
CETEC GmbH Chemie Pilotanlagen
Fabricant ✓ Distributeur ✓ Sous-traitant ✓ Prestataire de services ✓- Filtres pour tuyaux | Installations de filtrage | Fabrication de filtres
Dipl.-Ing. K. Weinhold GmbH & Co. KG
Fabricant ✓ Distributeur ✓- Filtres pour tuyaux | Accouplements pour tubes et tuyaux | Matériel de filtrage
Dolge Systemtechnik GmbH
Fabricant ✓ Distributeur ✓- Filtres pour tuyaux | Technique de filtres à poussière | Installations de filtres à gaz
- Filtres pour tuyaux | Filtre de puits | Tuyaux filtrants
Filtersafe MEA
Fabricant ✓ Distributeur ✓- Filtres pour tuyaux | Systèmes de filtrage de liquides | Filtres à huile
Filtertechnik Helmut Försterling
Distributeur ✓- Filtres pour tuyaux | Filtres d'aspiration | Filtres à lit profond
Suffel Fördertechnik GmbH & Co. KG
Distributeur ✓- Filtres pour tuyaux | Filtres de lignes | Filtre à cartouches
UGN-Umwelttechnik GmbH
Fabricant ✓ Distributeur ✓- Filtres pour tuyaux | Cartouches de filtrage | Biofiltre de regard de chaussée
VT FILTERTECHNIK GmbH
- Filtres pour tuyaux | Nattes filtrantes pour matières grossières | Installations de dépoussiérage à filtre
- Startup Filter Type W-HS are mainly installed during commissioning of a plant, so as to initially clean the closed piping system.T...
- Strainers - Filter Type W is a very economical strainer:Its pressureloss is only 50% in comparison to conventional pot / baske...
- Dual Filter - For plant operators it is important utilising their plant without disruptions so as to achieve a high level of produ...
Filter Type W is a very economical strainer:
Its pressure loss is only 50% in comparison to conventional pot / basket strainers and only 25% in comparison to Y-Filters of same dimension and sieve mesh.
This advantage reduces the cost of pump energy and result in extended reserves until the cleaning cycle. Connectors for the differential pressure are standard from size DN 150 and above (below upon request possible).
The streamlined angle of impact between the flow and the sieve / screen results in a slowly increasing pressure loss, caused by dirt, and at least more than double the operational time before cleaning.
As the cleaning cover is located at the top, the rare cleaning cycle is easily and conveniently carried out. The sieve is a closed basket and simultaneously serves the complete removal of the dirt – hence the remaining medium is already cleaned and can be just drained.
Traditional pot or basket strainers are limited by their horizontal installation in pipelines.
In the past, the option to utilise a strainer also in vertical mounting was only provided by Y-Filters – with its given disadvantages of high flow resistance and inconvenient handling of the cover for removal of the sieve (net weight of the cover, overhead work).
The Filter Type W, however, can be installed in both ways – with its given advantages in regards to minimal pressure losses and low frequency of maintenance.
In addition, equipping the Filter Type W with swivel (horizontal) or swing arm (vertikal) provides the maintenance personnel easier handling of the cover and a crane-independent removal of the sieve – with the dirt for cleaning.
Designed for: hydraulic
Filtration element: basket, strainer
Other characteristics: W
Operating pressure: Min.: 16 bar (232.06psi) / Max.: 100 bar (1450.38psi)
Strainers in pipelines have the following function:
Preventing faults and avoiding damaging of existing plant components;
Cleaning of the flowing medium.
These two primary tasks are valid in all areas of application – regardless whether the media are:
- Hot water (district heating systems)
- Cold water (Cooling Systems, municipal applications)
- Hydrocarbons (pumping of oil, petroleum, LNG/LPG)
- Acids or alkalis (chemical plants).
Generally, these tasks are fulfilled by all commercially available filter types, however with high energy requirement and frequent maintenance intervals. Additional cost for shutdown and cleaning could also be reduced.
Find enclosed a comparison of various filter types, 345 KB (.pdf)
Overall analysis and solution approach
Minimum €500 Mio. additional cost of pump energy arise in German plants every year!
The reason for this is the installation of common strainers with respective high flow resistance figures (ζ = 3 ... 7 and higher).
The Filter Type W offers with its ζ = 0.7 - 2.3 the solution:
efficient + effective= economical
ALFICO s.r.o.
Fabricant ✓ Distributeur ✓ Prestataire de services ✓We primarily supply engineering companies and system integrators who design and deliver complete technological units where efficient liquid filtration is essential. Our filters are known for their robust construction, high reliability, and flexibility to meet specific project requirements.
With many years of experience and in-house production, we offer customized filtration solutions tailored to each customer’s needs. Whether it’s a standalone filter or part of a complex process line, we ensure optimal fluid quality and equipment protection.
Filtres pour tuyaux - Producteurs, Vendeurs et Fournisseurs
Utilisez notre formulaire de service spécial et saisissez votre demande de recherche concernant les Filtres pour tuyaux.
Nos collaborateurs trouvent pour vous les meilleurs fabricants, distributeurs ou prestataires de services concernant les Filtres pour tuyaux et transmettent immédiatement votre demande par courriel à ces sociétés.
Vous recherchez des Filtres pour tuyaux?
L'annuaire de recherche IndustryStock propose encore plus de résultats relatifs à Filtres pour tuyaux. Vous pouvez rechercher d'autres producteurs, vendeurs, prestataires de services ou fournisseurs, en rentrant les mots clés suivants dans le masque d'entrée:
Comment évaluez-vous les informations figurant sur cette page ?