Motoros szabályozó szelep  Gyártók, Kereskedők, Beszállítók

Az SMC egy világhírű pneumatikus alkatrészgyártó, 1959-ben alapították, és székhelye Tokióban, Japánban. Először az SMC volt a por-kohászati ​​módszerrel gyártott "szinterezett fémszűrő" szűrő, amely évtizedek folyamatos erőfeszítései és innovációja után az SMC termékei fokozatosan gazdagodtak, és számos felhasználó bizalmát kiváló minőségre támaszkodták. Napjainkban az SMC globális vezető szerepet tölt be a pneumatikus iparban, és a vállalat korai "SMC" (Sintered Matel Company, azaz "Sintering Metals Company") nevét a világ évek óta használják, és világszerte elismert.

MV automation was formed in December 1991 as an independent company.
It was originally a division of VEB Instruments in Beierfeld specializing in solenoid valves. With over 40 years experience in the manufacture of solenoid valves, MV automation is well qualified to meet customer demands.
The continued investment in new technology along with research and development shows the commitment of MV automation to meeting the technical and quality demands of our customers.

Kangsaite Automation Group Co., Ltd. (KST) was Founded in 1997, is a high-tech group enterprise integrating R&D, manufacturing and sales. The Group has more than 300 employees, including more than 120 college graduates.
KST has four business divisions including control valves, sanitary valves, actuators and general valves and accessories, it has a strong R&D center with technical and talent team, which is jointly established by the Group and the Beijing University of Aeronautics and Astronautics(BUAA). The R&D team has 5 Professors, 20 Masters and Doctors, and 30 middle-level professional and technical personnel.And has two manufacturing bases in Xuancheng, Anhui and Wenzhou, Zhejiang. It has 50,000 square meters of production plants, and has several standard production lines including roughing, finishing and assembly. More than 300 sets of advanced equipment in the production plants which can produce 300,000 sets of various types of valves. It can develop and produce control valves (such as diaphragm regulating valves, pneumatic valves, electric valves, etc.), sanitary valves (such as angle seat valves, diaphragm valves, antibiotic valves, etc.),actuators (pneumatic actuators, electric actuators), general valves and accessories (such as ball valves, butterfly valves, positioners, solenoid valves, limit switch, etc.) and other products.
KST products are widely exported to more than 60 countries and regions around the world, and have been unanimously recognized and praised by clients in terms of cost performance, quality and service.
In 2010, KST was rated as a high-tech enterprise in Zhejiang Province and a key research unit in the national valve industry. Up to now, KST has more than 30 patents, including 10 invention patents and 20 utility model patents, and was awarded the title of “patent demonstration enterprise” by the government.
KST has passed a number of quality system certificates, such as DNV ISO9001 quality management system certification, CE, FDA, SIL and TS special equipment manufacturing licenses.
Adhering to the quality-oriented, customer-first business policy and service concept, KST will continue to provide customers with cost-effective products and perfect service.

As a fast-growing high-tech company, Schubert & Salzer Control Systems develops, produces and distributes highly precise industrial control and stop valves which are applied in the process industry.
Our valves are amongst the most efficient in today’s market when it comes to energy consumption, durability and noise pollution. Their compact design and high control accuracy minimize installation and maintenance requirements and ensure high operational and process reliability with exceptionally long service lives. To maintain this advantage, many resourceful minds at Schubert & Salzer are working to perfect these properties a littlemore every day.
Valves by Schubert & Salzer are used in the production of chemical or pharmaceutical products, food and beverage processing or the production of plastics, steel, glass or paper, as well as in the textile industry – in short, wherever liquid or gaseous flows need to be controlled, we will be there for you.
We are Schubert & Salzer Control Systems GmbH headquartered in Ingolstadt. Our subsidiaries in the Benelux, France, India, the UK and the USA as well as more than 40 international partners offer you and your customers quality products from Schubert & Salzer "Made in Germany”.

Founded 1969, KFM Regelungstechnik GmbH is primarily involved with control and regulation in industrial heating and process engineering in almost all sectors of industry, including shipbuilding. Both electronic controllers and control valves are supplied, so that, if necessary, the entire control system can be obtained from on source. lf desired, this can also include qualified consultation and advice on control technology.
The company has particularly wide experience and capability in the heat transfer oil sector. One place where this can be seen is in the design and construction of the KFM heat transfer oil control valves. Pneumatic and electrical actuators are manufactured by the company, and are also obtainable with integrated electronic position controllers.
The range of digital industrial and process controllers manufactured extends from simple units to high-performance devices, and are available in all common housings and plug-in formats. Up to eight relay outputs and a large number of signal inputs and outputs may be implemented on each device, and include digital interfaces and connections to all current industrial bus systems.
The devices can all be fitted with one or more of a wide range of controller functions. A modular extension system allows a large number of optional additional functions and supplementary equipment to be installed, including programmable, cascaded and ramp setpoint versions. In spite of the wide variety available, all versions are user-friendly and are easy and straightforward to handle.
Special approvals have been granted for use with thermal transfer oil heaters (DIN) and for marine applications (GL, BV, DNV). Another speciality, much in demand, are special „tailored" series, constructed to special customer requirem

Norgren része IMI plc büszke múlttal és jó eredményeket az innovatív mérnöki megoldások létrehozása terén a precíziós mozgásszabályozás és a folyadéktechnológia területén.
A Norgren sikere több mint 50 országban működő ügyfeleivel való együttműködésen alapul, olyan kulcsfontosságú területeken, mint a gyárautomatizálás, anyagmozgatás, vasút, energia, folyamatirányítás, élettudományok és haszongépjárművek.
A világ előtt álló kihívások és problémák egyre összetettebbé válnak. A vállalkozásoknak új gondolkodásra és új módszerekre van szükségük ahhoz, hogy sikeresen kezeljék az éghajlatváltozás, a gyors népességnövekedés és a technológia életminőség javítására való felhasználását.
Ezek a kihívások megkövetelikÁttörő projektek egy jobb világért.
Itt játszik kulcsszerepet Nogren.

DIN EN ISO 3834

DGRL 97/23/EG, ISO 14001, ISO 9001

Hauhinco – The Expert for Water Hydraulic Solutions
Hauhinco Maschinenfabrik G. Hausherr, Jochums GmbH & Co. KG (“Hauhinco”) was founded in Sprockhövel in 1908 as a mining supplier. Still located at its foundation place Sprockhövel, Hauhinco is nowadays one of the leading suppliers in Water Hydraulic Systems for mining and industrial applications. For both business units Hauhinco engineers and manufactures tailored solutions for customers around the world.
Hauhinco Maschinenfabrik and its 100% subsidiary Hauhinco LP in Evans City, USA have Agents in all important mining and industrial regions and have long lasting customer relations with well-known companies in more than 50 countries.
Water Hydraulics: Products and Services for mining and industrial applications
For underground mining Hauhinco manufactures High Pressure and water spray pump stations with EHP-3K and EHP-5K high pressure pumps as well as water treatment systems.
For various industrial applications Hauhinco engineers water hydraulic systems, especially for all areas in metal forming. One core competence is the development of press controls and drives for new and existing water hydraulic presses of all kinds.
For both business units comprehensive engineering and support-services are offered.

浙江欧德隆自控阀门有限公司位于“中国泵阀之乡”——瓯北镇东瓯工业区五星大道，是集工业自动化控制系统工程、制造、销售、服务于一体的技术公司，专业研发生产： 气动、液动、电动三大驱动装置及自控阀门配套产品。公司引进国内外先进技术、设备的基础上，设计制造出具有当代领先水平的各系列产品，广泛应用于石油、化工、轻工、 电站、冶金、暖通、医药、消防、及水处理等各种管道装置领域。先后为国家重点工程项目如电站成套、石油化工、核电、军工、油田开发等提供优质产品和良好服务。并出口 欧美、中东及东南亚市场，深受用户好评。
　　公司严格按照并通过ISO9001-2000国际体系认证标准，管理与技术日益创新。产品采用现代化CAD三维设计、系统优化设计，不仅外形美观，而且质量可靠、性能稳定、使用寿命 长等优点。公司采用精测机床设备、立式加工中心、高精度数控机床，确保产品零部件精密度，而具务批量生产能力。
　 “立足质量、强化管理、崇尚信誉、顾客至上”是公司经营理念；“精益求精、力求完美”是公司的管理方针；以人为本、团结互信、质量上乘是企业生存之根本，打造先进的企业文化，增强企业的凝聚力；我们将尽心尽力为广大用户提供优质产品，真诚希望各界朋友蓓临指导，关心支持欧德隆的发展，让我们为欧德隆共同努力，创造新的辉煌。

We offer global experience you can rely on. Bürkert is an adaptable organisation with flexible processes. We are continually committed to achieving success, both for our customers and ourselves. Consistent and continuous investment in research & development and in staff training enables us to offer our customers the very best in technology and services. For any request or goal you might have for your fluid process control, Bürkert can be relied upon; working together with you, we'll find the best solution, both from a technical and an economical point of view.
As Bürkert has grown, sales activities abroad have expanded, supported by an increasing number of subsidiaries in key industrialised countries. Our global presence enables us to focus on the most topical problems in specific markets, whilst offering our customers the most efficient solutions in their country.
The result is a global network that today consists of:

• 4 research & development centres
• 5 production locations
• 5 system houses
• 36 subsidiaries worldwide
• 2,400 employees