Finomkerámia alkatrészek  Gyártók, Kereskedők, Beszállítók

A Ferrotec (Kína) egy diverzifikált vállalat, amelyet a japán Ferrotec Co., Ltd. Alapít. 1992-ben Hangzhouban, Zhejiangban. Ez egy termék R & amp; AMPD, egy vállalat, amely integrálja a gyártást és az értékesítést. A Ferrocker (Kína) több mint 20 céget kezel Kínában, világszínvonalú anyagokat, eszközöket, berendezéseket és rendszermegoldásokat kínál hazai és nemzetközi ügyfeleknek. A Ferrotec globális marketing hálózatot hozott létre, és Kínában, Japánban, az Egyesült Államokban, Németországban, Franciaországban, Olaszországban, Spanyolországban, Oroszországban, Dél-Koreában, Malajziában és más helyeken alapított vállalatokat és irodákat hozott létre. Ez egy multinacionális csoport, amely számos csúcskategóriás gyártási technológiával rendelkezik.
A Ferrocker (Kína) nemzetközileg elismert félvezető termékek és megoldások szállítója. A "szorgalom, vágy, feltárás, innováció" üzleti filozófiája és a ferromágneses folyadékok és a ferrofluid vákuumos táplálás alapvető technológiája alapján, Ferromágneses folyadékok (Kína) ferromágneses folyadéktömítésekkel, félvezető szilikonlapokkal, termoelektromos félvezető hűtőanyagokkal és eszközökkel, félvezető kvarctermékekkel, precíziós kerámiákkal, félvezető vákuumos betáplálással és nagy kamrák, napelemes anyagok, elektronsugaras párolgás és bevonógépek kutatásával, fejlesztésével, gyártásával és értékesítésével foglalkoznak.És értékesítés. A termékek közé tartoznak az elektronika, a félvezetők, a megmunkálás, a napenergia, az autóipar/új energetikai járművek, az űrkutatás, a háztartási gépek, az orvosi berendezések és sok más terület.
A Ferrocker (Kína) elkötelezett amellett, hogy "elégedettséget, gondoskodást nyújtson az ügyfeleknek, és álmokat és vitalitást biztosítson a világnak". A "szorgalom, vállalkozó szellem, úttörő és innovatív" vállalati filozófiát tekintjük, és ragaszkodunk ahhoz, hogy "a minőség a vállalkozás élete és a vállalkozás növekedésének alapja, a minőség a hitelesség és az ügyfélbázis létrehozásának alapja".
A technológiai innováció, a tehetségfejlesztésre összpontosítva a vállalat folyamatosan számos tehetséget vonz, bemutatja és elnyeli a fejlett gyártási technológiákat, kutatja és fejleszti a nemzetközi színvonalú és a kínai piaci igényekhez megfelelő high-tech termékeket, és fokozatosan számos iparágban nagy léptékű diverzifikált vállalati csoportgá válik.csoport.

Since 1983, Advanced Ceramic Technology has been dedicated to the manufacturing of ceramic materials and the precision machining of industrial ceramic parts. What sets A.C.T apart is its dedication to quality, craftmanship and professionalism. A.C.T. is a certified small business located in Orange, California.
A.C.T.'s comprehensive quality control system ensures product and process integrity. It complies with the requirements of AS9003. In addition, it provides a framework for establishing and reviewing quality objectives and includes a continuous improvement program.
Advanced Ceramic Technology complies with all laws and regulations regarding export-controlled data and is registered with the Department of State in accordance with the International Trafffic in Arms Regulations (ITAR).

Wir sind H.C. Starck Tungsten Powders, ein Unternehmen der Masan High-Tech Materials Gruppe. Seit mehr als 100 Jahren entwickeln und produzieren wir für unsere Kunden hochwertige Pulver aus dem Refraktärmetall Wolfram und dessen Verbindungen.
Unser Produktspektrum reicht von Wolframaten bis zu Wolframcarbiden in ultrafeinen bis groben Korngrößen. Sie alle entsprechen höchsten Ansprüchen an Qualität und Leistungsfähigkeit. Dank der umfassenden Kompetenz unserer Teams in Chemie und Metallurgie beschreiten wir auch innovative Wege, um für Sie die Lösung mit optimalem Mehrwert zu entwickeln. Das heißt für unsere Kunden: Sie erhalten exakt das Pulver, das ihren individuellen Anforderungen entspricht.

KYOCERA Precision Tools (KPT)
KYOCERA Precision Tools (KPT) is a division of the Kyocera-SGS Precision Tools Group specializing in the manufacturing, servicing, and marketing of Indexable Cutting Tools and Printed Circuit Board (PCB) drills. With over 40 years of cutting tool expertise, KYOCERA has become the market-leader in Japan and has an established global presence with manufacturing, technical centers and sales offices in the Americas, Europe, and Asia.
CUTTING-EDGE, COST-EFFICIENT SOLUTIONS
KYOCERA Precision Tools develops state-of-the-art indexable cutting tools that exceed quality expectations while providing the cost-efficiency that today's metalworking consumer demands. Though ceramic technologies were the nucleus of the original business model, Kyocera has become a global leader in the metal removal industry by developing state-of-the-art cutting tool solutions using carbide, cermet, CBN and PCD. Over the past 40 years, Kyocera has developed some of the highest-quality, innovative indexable tooling solutions the industry has seen, including the MEC Ultra-Hurricane 90° Milling Cutters, the MFH-Raptor High-Feed Milling Cutters, the DRZ & DRV Family of Magic Drills, and CCX, the first-ever CVD Coated Cermet.
DISTRIBUTION
Kyocera Precision Tools are sold through authorized distributors throughout North America. Please click the Locate a Distributor link to find a location near you.

In 1904 Armand Marseille from St. Petersburg founded the company manufacturing porcelain heads for dolls. Several years later production shifted to technical ceramics.
In 1913 the company was sold to Siemens - Schuckert AG in Berlin Siemensstadt.
Due to the ever increasing requirement for electricity in the 1920s the demand for technical porcelain for insulation and isolation applications rose significantly.
The introduction of new materials, like Steatite, and the expansion of capacity ensured the manufacture of more complex products. The plant in Neuhaus-Schierschnitz specialized in Steatite in 1958. Between 1965 and 1969 it was merged with the plants in Sonneberg and intergrated with the Kombinat Keramische Werke Hermsdorf.
The company was taken over by a trusteeship in 1989 and restructured into the stock company Tridelta AG. In 1993 the electro-ceramic production was outsourced and WWS Keramik Neuhaus GmbH was founded by means of a Management-Buy-Out.

BCE founded in 1986 in Mannheim-Friedrichsfeld manufactures customized oxide ceramic components made out of Alumina (Al2O3) and Zirconia (ZrO2) and mixed oxides ATZ respectively ZTA and secondary out of non-oxide ceramics starting with lot sizes from one part. Based on more than 25 years experience in thefield of engineering ceramics BCE assists all its customers in questions of an optimum material choice for specific applications. Even a prototype manufacturing can be realized in short lead time before launching a series production. Use our knowledge! We are pleased to find out your candidate appropriate material and your optimum constructional solution.

The Rauschert group
Reliability, Competence and Innovations for more than 110 years!
We one of the leading manufacturers of Technical Ceramics in the world.
In addition, we produce Plastic Components at the highest stage.
With ignition systems, heating elements, filtration components and hybrids, we furthermore offer ready to install Functional Components and Composites.

This great application diversity is possible thanks to advanced ceramics, also referred to as technical ceramics, engineering ceramics or industrial ceramics. These terms cover a variety of different and in part highly specialized ceramic materials with unique mechanical, electrical, thermal and biochemical properties and property combinations.
Advanced ceramics from CeramTec, as an international manufacturer and supplier, are used in Automotive, Mobility & eMobility | Cutting Tools | Electrical Engineering & Electronic Applications | Mechanical & Plant Engineering | Medical Technology and in many other applications. Correctly selecting the required ceramic materials, adjusting and adapting Advanced Ceramics to meet the respective requirements in the field of application, and optimally designing and manufacturing parts and components to take advantage of the special material properties of ceramics are core competencies of the ceramics experts and specialists at CeramTec.
With more than 3,470 employees and production sites and subsidiaries in Europe, America and Asia, CeramTec as manufacturer and supplier has a worldwide presence.

Xiamen Fine Ceramics Technology Co.,Ltd (XMCERA) is well known as a specialist manufacturer of custom-machined precision parts made from high-performance materials such as advanced technical ceramics, refractory metals and alloys, with no minimum order quantity (Rapid Prototyping) and manufacturing production.
XMCERA find cost-efficient solutions using a wide range of material qualities to meet the research, development and specialist production requirements of science and industry worldwide.
We focus on achieving high quality in our products and services.

FRIATEC AG is a specialist company for products made of non-corroding and wear-resistant materials. We develop innovative solutions for the global market in dialogue with our customers.
Innovations for more than 150 years
The company was founded in 1863 in Mannheim, Germany, as a brickyard and succeeded in developing its first pathbreaking innovation, chemical stoneware, in 1888. Numerous new developments followed. Among other things, the company started in the mid of the past century processing plastics and combined modern and traditional materials when producing chemical devices and facilities.
The following years were characterised by the expansion in the core business and the opening up of more and more new business segments. As Deutsche Steinzeug and later as Friedrichsfeld GmbH, the company, which has been operating under the name FRIATEC AG since 1993, continuously developed to become an internationally active, diversified company.
Spectrum of innovative solutions
As such, FRIATEC AG today offers a spectrum of innovative solutions for many industries, e.g. jointing technology for pipe systems, special pumps for aggressive, volatile or explosive media, but also ceramic components which are used in laboratory and electrical engineering but also in medical engineering. With its sophisticated solutions, FRIATEC AG is not only among the most well-known and well-established companies in the metropolitan region Rhine-Neckar but is also one of the global market leaders of its industry.
Partner of a powerful community
Since 2003, FRIATEC AG has been a member of the ALIAXIS group of companies with headquarters in Brussels, Belgium. ALIAXIS is the worldwide largest producer of plastic pipe systems for the construction industry, the industry and utilities.